SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
BACnet PIC Statement for Vive
using Vive Version 1.07
Software License
369996d 3 05.09.18
Vive
Object Name Type Instance Read Write COV Units Min
PV
Max PV Inactive
Text (0)
Active
Text (1)
State Text
(Multi-State)
Notes
{SystemName}
{Instance}
DEVICE 22 bit
GUID
X — — — — — — — — The System Name is the logical
name of one of the Vive hubs that
typically corresponds to a physical
portion of the building such as a
floor. The Instance is the same as
the unique Device ID assigned to
each Vive hub.
Master Load shed
Enabled
BV 2 X X X — 0 1 Disabled Enabled — This value determines whether all of
the areas in the Vive subsystem are
being controlled via load shedding.
When this value is set to Enabled, for
all areas in the hub that have load
shed allowed, any dimmable lights in
each area that are turned on will
have their light level reduced by the
percentage specified in the Load
shed Goal value. The specified
switched loads will turn off. When
Disabled, the lights will return to
their previous level and the specified
switched loads will return to their
previous state.
Object Name Type Instance Read Write COV Units Min
PV
Max PV Inactive
Text (0)
Active
Text (1)
State Text
(Multi-State)
Notes
{AreaName}
{Instance}
DEVICE 22 bit
GUID
X — — — — — — — — The Area Name is the logical name
that typically corresponds to a
physical location in a building. The
Instance is the same as the unique
Device ID assigned to each area.
Lighting Level AV 2 X X X % 0 100 — — — The intensity level of all lighting
fixtures in the area. The light level
will be an analog value between 0%
and 100%. If the lighting fixtures in
the area are at different light levels,
this value will be set to the level of
the highest intensity in that area.
This will apply to both switched and
dimmed lighting fixtures. If a
non-zero level is written switched
lighting fixtures will turn on and
dimmed lighting fixtures will go to
that level.
Lighting State BV 3 X X X — 0 1 Off On — The Lighting State will be On if any
of the lighting fixtures in the area
are in the on state; if all lighting
fixtures are off, the Lighting State
will be set to Off. When written with
On, it will turn all dimmable lighting
loads to 100% and turn all switched
lighting loads on. When written with
Off, it will turn all lighting loads off.
AV = Analog-Value, BV = Binary-Value, MSV = Multi-State-Value
{Area Name} / {SystemName} is a text string defined in the Lutron Vive system configuration software
{Instance} is a number defined in the Lutron Vive system configuration software that is equal to the {Base} number + unique Device ID assigned to each area.
PV = Present-Value
