Fillable Lutron electronics GRAFIK Eye QS Wireless Control Unit (230 V~ CE)

Fill Online, Printable, Fillable, Blank Lutron electronics GRAFIK Eye QS Wireless Control Unit (230 V~ CE) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Lutron electronics GRAFIK Eye QS Wireless Control Unit (230 V~ CE)

On average this form takes 33 minutes to complete

The Lutron electronics GRAFIK Eye QS Wireless Control Unit (230 V~ CE) form is 25 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 133 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
Preset Dimming Controls
369315d 1 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
GRAFIK Eye QS Wireless Control Unit (230 V~ CE)
LUTRON
1
2
3
4
Description
GRAFIK Eye QS Wireless is the premier energy-saving light and window
treatment control. GRAFIK Eye QS includes an astronomic timeclock, intuitive
lighting presets, and direct window treatment control. Now with wireless
technology, you can use the GRAFIK Eye QS Wireless to seamlessly integrate
with a variety of Lutron wireless products and systems, including Radio Powr
Savr occupancy, vacancy, and daylight sensors, Sivoia QS Wireless window
treatments, Pico® wireless control, and other GRAFIK Eye wireless products.
Additionally, the GRAFIK Eye QS Wireless is compatible with all Lutron wired
QS products and systems, including Quantum.
Mechanical Dimensions
119 mm
239 mm
10 mm
51 mm
Front View Side View
Fits into a 4-gang U.S. backbox, 90.4 mm deep (Lutron P/N 245-254) or
76.2 mm deep (Lutron P/N 241-400)
1
Preset Dimming Controls
369315d 2 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
®
Test
Power
Hi Temp
Ethernet
DALI 1 DALI 2
IR
Photo
Com
20 V
20 V
Com
MUX
MUX
24 V
COM
Occ
IR
Photo
Occ
Energi Savr Node QS
TM
QSNE-2DAL-D
230 V~ 50/60 Hz 100 mA
www.lutron.com
+44.(0)20.7680.4481
LN
1 1 2 2
3
3 4 4
QS
8 mm
0,5 N∙m
®
Test
Power
Hi Temp
Ethernet
DALI 1 DALI 2
IR
Photo
Com
20 V
20 V
Com
MUX
MUX
24 V
COM
Occ
IR
Photo
Occ
Energi Savr Node QS
TM
QSNE-2DAL-D
230 V~ 50/60 Hz 100 mA
www.lutron.com
+44.(0)20.7680.4481
LN
1 1 2 2
3
3 4 4
QS
8 mm
0,5 N∙m
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
®
Test
Power
Hi Temp
Ethernet
DALI 1 DALI 2
IR
Photo
Com
20 V
20 V
Com
MUX
MUX
24 V
COM
Occ
IR
Photo
Occ
Energi Savr Node QS
TM
QSNE-2DAL-D
230 V~ 50/60 Hz 100 mA
www.lutron.com
+44.(0)20.7680.4481
LN
1 1 2 2
3
3 4 4
QS
8 mm
0,5 N∙m
®
Test
Power
Hi Temp
Ethernet
DALI 1 DALI 2
IR
Photo
Com
20 V
20 V
Com
MUX
MUX
24 V
COM
Occ
IR
Photo
Occ
Energi Savr Node QS
TM
QSNE-2DAL-D
230 V~ 50/60 Hz 100 mA
www.lutron.com
+44.(0)20.7680.4481
LN
1 1 2 2
3
3 4 4
QS
8 mm
0,5 N∙m
System Topologies
The GRAFIK Eye QS Wireless can be specified in three different system topologies. Examples of each are shown below.
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
Example of GRAFIK Eye-centric
Wireless System
Example of Mixed GRAFIK Eye-centric
Wired/Wireless System
Wireless
Sivoia QS
shade
Wireless
Sivoia QS
shade
Wired QS link
Wired
occupancy
sensor
Wireless
occupancy
sensor
10 m
wireless
range;
20 m
in open air
GRAFIK Eye QS
wireless
GRAFIK Eye QS
wireless
seeTouch
QS
seeTouch
QS
Wireless
occupancy
sensor
GRAFIK Eye QS
wireless
Example of Wired System
QSE-CI-NWK-E
Sivoia QS
shade
seeTouch
QS
seeTouch
QS
Wired
occupancy
sensor
GRAFIK Eye QS
wireless
GRAFIK Eye QS
wireless
Pico
wireless
control
Pico
wireless
control
Wired QS link
Quantum
(optional)
QS Sensor
Module
Energi Savr
Node
Wireless
daylight
sensor
Wireless
daylight
sensor
2
Preset Dimming Controls
369315d 3 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
Features
• Lutron’s proprietary Clear Connect RF technology.
Operates in 868 MHz band.
• Pushbutton recall of four preset lighting scenes,
plus Off.
• Sixteen (16) total available scenes, plus Off scene.
• Zones can control many light source types directly
or through power modules.
• Optional integrated window treatment control
buttons, which can also be added to the unit after
installation.
• Master override buttons to raise and lower
all lights.
• Allows setup of lighting scenes and window
treatment presets using buttons on the control unit.
• Built-in infrared (IR) receiver.
• External IR connection.
• Built-in astronomic timeclock.
• Info screen shows zone light level percentage,
energy savings, zone labeling, and programming.
• Lockout option prevents accidental changes.
• Occupancy sensor input and 24 V- power for one
occupancy sensor.
• QS communication link for seamless integration of
lights, motorised window treatments, wallstations,
and integration interfaces.
• Compatible with all Lutron QS system
components.
• Wireless communication for seamless integration
with a variety of Lutron wireless products and
systems, including Radio PowrSavr occupancy
and vacancy sensors, Sivoia QS wireless window
treatments, Pico wireless control, and other
GRAFIK Eye QS wireless products.
• Backlit buttons with engraving make unit easy to
locate and operate.
• Available in a variety of colours and finishes.
LUTRON
OK
1 2 3 4 5 6
Optional window
treatment control
keypad
Zone
control
Infrared
receiver
USB Type
mini B
Info
screen
Scene
control
keypad
Note: Symbol-based Engraving (-SGN) shown.
1
2
3
4
1
2
3
4
3
Preset Dimming Controls
369315d 4 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
Key Design Features
• RF meets IEC 801-2.
• Lightning strike protection meets ANSI/IEEE standard
62.41-1980. Can withstand voltage surges of up to
6 000 V~ and current surges of up to 3 000 A.
• Tested to withstand 16 kV electrostatic discharge without
damage or memory loss.
• RTISS Equipped: Compensates in real time for incoming
line voltage variations (no visible flicker with +/-2%
change in RMS voltage per cycle, and +/-2% Hz change
in frequency per second).
• Power failure memory retains programming and light level
settings for up to 10 years in the event of a power loss.
• The GRAFIK Eye QS supplies 3 Power Draw Units
(PDUs) on the QS link.
For complete information, see app note #405 “Power
Draw Units on the QS Link,” (P/N 369405)
at www.lutron.com
• Faceplate is hinged at the top and bottom, and stays
open at 180° for ease of access.
Scene and Shade Buttons
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to
find and to operate the control unit in low light conditions
(backlight can be disabled).
• Optional button engraving is angled up to the eye for
easy reading.
• Predefined label stickers are included for field labeling.
• 4 preset lighting scenes, plus Off, are accessible from the
front of the control unit.
• 12 additional scenes are stored in the control unit and
are accessible from the integral timeclock, seeTouch QS
wallstations, and QS interfaces.
• Light levels fade smoothly between scenes. Fade time
can be set differently for each scene: 0 to 59 seconds, or
1 to 60 minutes. Maximum fade time from Scene Off is
3 seconds.
Input Power
• 230 V~ 50 Hz
Environment
• 0 to 40 °C
• Relative humidity less than 90% non-condensing
Compliance
• CE
Lighting Sources/Load Types
• EcoSystem and Hi-lume 3D ballasts, and Hi-lume LED
drivers directly wired to integral EcoSystem digital link
• Zones on Energi Savr Node products wired to the same QS
link
– Zones on Energi Savr Node with Softswitch
– Zones on Energi Savr Node for 0-10 V
– Zones on Energi Savr Node with EcoSystem
Please refer to “Remote Zone Mapping” for important
information.
• DMX channel(s) through DMX output interface
(QSE-CI-DMX). Please refer to “Accessory Controls: DMX
Output Interface”
Zones can also control the following lighting sources with a
smooth, continuous square law dimming curve or on a full
conduction non-dim basis:
• Incandescent
• Halogen
• Magnetic low-voltage transformer
• Lutron Tu-Wire electronic fluorescent dimming ballast
• Neon and cold cathode
• Non-dim (incandescent, magnetic low-voltage, Tu-Wire, or
neon/cold cathode)
Please refer to “Capacities” for more information.
Zones can also control the following lighting sources with a
smooth, continuous square law dimming curve or on a full
conduction non-dim basis through separate Lutron power
modules:
• Electronic low-voltage transformers (use ELV power module:
PHPM-PA-DV-WH/PHPM-PA-120-WH)
• Non-dim (use switching module: PHPM-SW-DV-WH)
• 0-10 V (use TVI)
Note: A zone may be programmed to control only one load
type at a time.
Specifications
4
Preset Dimming Controls
369315d 5 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
Astronomic Timeclock
• Integral to all units.
• 7 daily schedules available.
• One available holiday schedule is programmable by date
up to one year in advance.
• 25 events per day maximum.
• Timeclock events are programmable to control scenes
that affect any Energi Savr Node unit connected on the
QS link without changing the local scene on the
GRAFIK Eye QS.
• Astronomic times are programmable by integral city
database or by entering latitude and longitude. Sunrise/
Sunset times automatically adjust throughout the year
based on location.
• Automatically adjusts for Daylight Saving Time (DST);
DST is programmable.
• Local timeclock events can activate any of the following
features:
– Scenes 1 to 16 and Off
– Any available window treatment presets
– Start and End afterhours mode
– Enable and Disable daylighting for all zones/groups
– Enable and Disable occupancy for occupancy/vacancy
sensors
– Enable and Disable occupied events for all occupancy
sensors
System Communications and Capacities
• Low-voltage type IEC PELV wiring connects control units,
wallstations, motorised window treatments, and control
interfaces.
• A QS system can have up to 100 devices and 100 zones.
• A QS system can have up to 30 wireless devices.
Infrared
• Infrared (IR) receiver allows infrared transmitters to select
8 scenes, raise/lower lighting zones, or raise/lower
window treatments.
• Transmitter buttons imitate buttons on faceplate.
• 15 m line of sight range.
• Terminal block infrared input for connection to a wired
IR input from third-party equipment.
• IR can be disabled via programming.
• Works with Lutron GRX-IT and GRX-8IT infrared remote
controls.
Shade Control
• The GRAFIK Eye QS can include up to 3 shade button
columns. Each column has backlit open, preset, close, and
raise/lower buttons.
• Each shade button column can be programmed to operate
one shade or a group of shades. (Shades may be assigned
to more than one shade button column).
• Faceplates are available with 1, 2 and 3 shade button
columns.
Wireless shade limitations:
• Access to the Sivoia QS Wireless electronic drive unit (EDU)
is required to associate shades with the GRAFIK Eye QS
and set their raise/lower limits.
Exception: Sivoia QS Wireless cellular shades allow limit
setting from the GRAFIK Eye QS wireless control unit.
• Wired and wireless shades may not be programmed into
the same shade button column; however, both may be
used on the same GRAFIK Eye QS control unit.
• Scene commands that affect wireless shades across
multiple shade button columns will have a 1-second delay
from column to column. This does not occur in RadioRA 2
systems.
Zone Control
• Each zone has a dedicated raise and lower button to adjust
the zone.
• Each zone has a dedicated 7 LED bar graph for level
status. Percentage of light level and energy saved is
displayed on the info screen.
• All zone information has blue backlit LEDs. Backlight turns
off when idle for 30 seconds.
• High-end and low-end trim settings are adjustable per zone
(high end from 99 to 55%; low end from 45 to 1%).
Note: Trim for remote zones must be adjusted locally on
the Energi Savr Node unit.
• Each zone is programmable to only one load type at a time.
Info Screen
• OLED (organic LED) screen is viewable from all angles.
• Screen turns off when idle for 30 seconds.
• Programmable zone labels.
• Programmable scene labels.
• Status of real-time zone percentage and energy savings.
• Programmable timeclock schedules.
• Programmable window treatment labels.
• Selectable display languages:
– English – Spanish – French
– Italian – German – Portuguese
Specifications
5
Preset Dimming Controls
369315d 6 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
Accessory Controls: seeTouch QS Wallstations (QSWE)
• Wired seeTouch QS keypads provide the following features:
– Access to one or more of the 16 scenes on the
GRAFIK Eye QS Wireless control unit
– Zone toggle, partitioning, sequencing, fine tune, panic
mode, and timeclock enable/disable
– Contact closure inputs
– Various other functions that are available on specific
wallstation configurations. Refer to the seeTouch
specification submittal.
Wireless RF Compatibility
• Features Lutron’s proprietary Clear Connect RF Technology
• Operates in the 868 MHz band
• Compatible with other Lutron wireless products/systems,
such as:
– Pico (P/N QSR8P and QSRKP)
– Radio Powr Savr occupancy/vacancy/daylight sensors
(P/N LRF3-)
– Sivoia QS wireless products
– Other GRAFIK Eye QS wireless units (P/N QSGRK-)
Accessory Controls: Pico Wireless Control
(QSR8P models)
• The Pico Wireless Control is battery powered. It can
control GRAFIK Eye QS wireless control units within a
10 m range (20 m in open air). It provides the following
features:
– Control of one or more zones on the GRAFIK Eye QS
Wireless control unit: turns zone(s) on or off, raises/lowers
zone(s), allows programmable light levels for each button,
and goes to user-programmable preset level
– Control of one or more scenes on the GRAFIK Eye QS
Wireless control unit: the Pico® wireless control can
access any three sequential scenes (1 through 16), or any
two sequential scenes and Off; and can raise and lower
lighting levels.
Note: “Unaffected” is not a valid level for Pico zone
programming.
Accessory Controls: QS Sensor Module (QSM3)
• The QS Sensor Module provides a means to link wired
or wireless occupancy sensors or daylight sensors, Pico
controls, and wired infrared sensors to a GRAFIK Eye QS
control unit via the wired QS link.
– Occupancy sensors wired (or wirelessly linked) to a QS
Sensor Module can be used by one or more GRAFIK
Eye QS control units on the wired link.
– Daylight sensors wired (or wirelessly linked) to a
QS Sensor Module can be used by one or more
GRAFIK Eye QS control units on the wired link.
– Pico wireless controls can control either one or more
zones or scenes on the GRAFIK Eye QS.
– Pico wired controls can be used, when connected to
a QS Sensor Module, to control one or more zones or
scenes on the GRAFIK Eye QS control unit.
– Infrared sensors can control either one or more zones
or scenes on the GRAFIK Eye QS. Functionality varies;
refer to the documentation for the QS Sensor Module for
details.
Accessory Controls: Contact Closure Input/Output
Interface (QSE-IO)
• Recalls preset light levels for the following set of scenes
on the GRAFIK Eye QS:
Scenes 1-4 and Off Scenes 9-12 and Off
Scenes 5-8 and Off Scenes 13-16 and Off
• Sequence scenes 5-16, Enable/Disable Zone Lockout,
Enable/Disable Scene Lockout, Enable/Disable Panic
Mode, Enable/Disable Timeclock.
• Occupancy Sensors. An individual input counts as 1
occupancy sensor for the GRAFIK Eye QS. Each input
can be assigned to either Scene Control or Zone Control
(please refer to the Occupancy Sensor(s) section of
this guide).
• Zone Toggle. Allows an input to toggle one or more zones
between programmable preset level(s) and off.
• Shade Output mode. A Shade Column on the GRAFIK
Eye QS can be linked to control outputs 1-3 and/or
outputs 4-5 on the QSE-IO.
Accessory Controls:
DMX Output Interface (QSE-CI-DMX)
• Any zone on the GRAFIK Eye QS control unit can be
mapped to any single DMX512 Channel.
• Any zone on the GRAFIK Eye QS control unit can be
simultaneously mapped to any three DMX512 channels
(providing RGB/CMY control).
• DMX loads cannot be used with daylighting.
Specifications
6
Preset Dimming Controls
369315d 7 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
Accessory Controls: Ethernet and RS232 Interface
(QSE-CI-NWK-E)
• Allows for monitoring and control of the outputs and local
scenes of the GRAFIK Eye QS.
Other Accessory Controls and Devices
• Energi Savr Node (ESN)
Occupancy Sensor(s)
• The GRAFIK Eye QS works with occupancy sensors
through either:
– Scene Control: Up to 16 sensors activate user-selected
occupancy and vacancy scenes.*
– Zone Control: Up to four sensors per zone activate
user-selected occupancy and vacancy zone levels.
• Occupancy sensors may include:
– Contact closure sensors wired to CCI input on back of
GRAFIK Eye QS
– Wireless Radio Powr Savr occupancy or vacancy sensors
(model numbers starting with LRF3)
– Wired or wireless sensors connected QS Sensor Module
(QSM)
• If any sensor in a group detects occupancy, then the
GRAFIK Eye QS will go to the designated occupancy scene
or zone level.
• If all sensors in a group detect vacancy, then the
GRAFIK Eye QS will go to the designated vacancy scene or
zone level.
• Low battery: the Diagnostics screen will display a low
battery symbol when applicable.
• If the GRAFIK Eye QS control unit does not receive a signal
from an occupancy sensor on the link (usually due to a
dead battery), the lights associated with that sensor will go
to the occupied level.
Specifications
Daylight Sensor(s)
• The GRAFIK Eye QS allows daylight sensors to control
one or more lighting zones to adjust electric light levels
based on measured daylight levels.
• Daylight sensors may include:
– Wireless Radio Powr Savr (model numbers starting with
LRF3)
– Wired or wireless sensors connected to a QS sensor
module (QSM)
• A daylight sensor can control one or more
GRAFIK Eye QS zones:
– Each zone can be calibrated to target light levels
– A zone can be controlled by no more than one daylight
sensor
• Daylight control can be enabled or disabled on a
scene-by-scene basis
– By default, daylight control is enabled in all scenes
Note: Daylight control through the GRAFIK Eye QS only
affects lighting loads. Shade groups cannot be controlled
by daylight sensors. Daylighting does not affect DMX or
RGB/CMY DMX loads.
Daylighting of Remote Zones linked to Energi Savr Node
zones must be configured at the Energi Savr Node unit or
through the Energi Savr Node app for iPod.
* Applicable only to units that ship with firmware version 9.002 and
higher. Previous versions support up to 4 sensors.
7
Preset Dimming Controls
369315d 8 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
Specifications
Contact Closure Input (CCI)
with Power Supply Output
• Each GRAFIK Eye QS has one contact closure input
(Terminal A).
– The attached device must provide a dry contact closure
or solid-state output.
– Input is miswire-protected up to 36 V-.
• The contact closure is capable of accepting the following
types of inputs:
– Maintained (default): The GRAFIK Eye QS control unit will
act on both a contact closure and a contact open/release
event.
– Momentary: The GRAFIK Eye QS control unit will act on
only contact closure events.
• Each GRAFIK Eye QS can supply 50 mA maximum at
24 V-.
– Useful for powering occupancy sensors.
– An auxiliary power supply must be used if the device
requires more than 50 mA.
• The CCI is capable of operating in the following modes
– Occupancy: If an occupancy sensor is wired directly to
the GRAFIK Eye QS.
– Emergency: This setting allows the GRAFIK Eye QS to
work with a LUT-ELI. When an emergency situation is
detected, all lights will go to full on, and no operations will
be allowed until the emergency signal is cleared.
– Afterhours: Allows the CCI to start and end the afterhours
mode.
– Timeclock: Allows the CCI to enable and disable the
timeclock.
– Scene Lockout: Prevents the user from making any
changes to the control unit. The current scene will stay on
until the CCI enables normal operation.
– Save Never: Prevents any changes from being saved
while the CCI is being used.
– Disable CCI: The CCI will have no effect on the system
and will not appear on the list of available sensors.
Security Lockout Password
• A 4-digit password (using characters A to Z and 0 to 9) can
be enabled/disabled to lock out access to the
Programming Menu.
• By default there is no password enabled on the GRAFIK
Eye QS.
• In case the 4-digit password is forgotten, contact Lutron
Customer Assistance to regain access.
Remote Zone Mapping
• Map a GRAFIK Eye QS zone directly to an Energi Savr
Node output so that programmed scenes in the GRAFIK
Eye QS control unit will directly control the output levels of
the Energi Savr Node.
• Adjust high-end and low-end trim for remote zones
through the Energi Savr Node or Energi Savr app
software.
• Change load types of remote zones through the Energi
Savr Node or Energi Savr app software.
• Configure daylighting for remote zones through the Energi
Savr Node or Energi Savr app software.
• Required:
– GRAFIK Eye QS control unit with firmware version 7.000
or higher
– Energi Savr Node unit with firmware version 6.000 or
higher
– Energi Savr app version 6.0.0 or higher (required only if
the Energi Savr Node unit has been configured using
the app)
Partitioning
• When partition is open, creating one large space,
automatically combines lighting preset functions for
multiple GRAFIK Eye QS control units.
• When partition is closed, creating two or more smaller
spaces, lighting preset functions become independent.
• Requires a QSWS2, QSWS2-2B or a QSE-IO; a
GRX-IRPS infrared transmitter/receiver pair; and a
GRX-12VDC power supply for operation.
• If occupancy sensors are required in a partitioned space,
note that each room’s occupancy sensor(s) will operate
independent of the partition status.
8
Preset Dimming Controls
369315d 9 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
Specifications
System Limits
• The QS wired communication link is limited to 100 devices (wired or wireless) or 100 zones.
Capacities
Zones Unit Zone
Capacity Capacity
(watts) (watts)
3 1 500 500
4 2 000 500
6 2 300 500
Load Type Notes
• For applications with ELV loads or load wattages exceeding the specified capacities, please refer to specifications
for Lutron power modules (NGRX-PB-CE; NGRX-ELVI-CE; ELVI-1000-CE).
• Not all loads must be connected; however, connected zones must have a minimum load of 40 W.
• Maximum total lighting load for a magnetic low-voltage zone is 500 VA / 400 W.
• No zone may be loaded with more than 500 W.
9
Preset Dimming Controls
369315d 10 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
GRAFIK Eye QS Wireless
Standard Model Numbers
See following pages for Ordering Custom (Non-Standard) Model Numbers
See Standard Colour Combinations page for faceplate, stripe, and button colours
QSGRK - _ PCE - _ _ WH
Prefix
Number
of Zones
3 = 3 zones
4 = 4 zones
6 = 6 zones
Phase
Control
Triac-CE
Number of
Window Treatment
Columns
Top Door
Colour
Omit = White
T = Translucent
White
(standard
colour)
Example:
QSGRK-6PCE-1TWH
6-zone standard white unit with
1 window treatment column and
translucent top door.
Unit will ship unengraved
with engraving certificate that
customer can redeem at no
charge.
Important Note:
For any non-standard units, you must order BOTH a base unit and a Faceplate Kit.
Please see the Custom Ordering Information on the following pages.
3 Zones
QSGRK-3PCE-WH
QSGRK-3PCE-TWH
QSGRK-3PCE-1WH
QSGRK-3PCE-1TWH
4 Zones
QSGRK-4PCE-WH
QSGRK-4PCE-TWH
QSGRK-4PCE-1WH
QSGRK-4PCE-1TWH
6 Zones
QSGRK-6PCE-WH
QSGRK-6PCE-TWH
QSGRK-6PCE-1WH
QSGRK-6PCE-1TWH
Available Standard Model Numbers
Omit = none
1 = 1 window
treatment
column
10
Preset Dimming Controls
369315d 11 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
GRAFIK Eye QS Wireless
Custom (non-standard) Colour Options and Model Numbers
You must order a Base Unit and a Faceplate Kit
See Standard Colour Combinations page for faceplate, stripe, and button colours
Base Unit
QSGRK - _ PCE
Prefix
Number
of Zones
3 = 3 zones
4 = 4 zones
6 = 6 zones
Phase Control Triac-CE
Example:
QSGRK-6PCE
6-zone base unit
and
QSGFP-2WH-G
Ivory faceplate kit with two
window treatment columns and
symbol-based engraving
QSGFP - WH -
Faceplate
Prefix
Number
of Shade
Columns
Omit = none
1 = 1 column
2 = 2 columns
3 = 3 columns
Top
Door
Colour
Standard Engraved Faceplate Kit (WH only)
(includes coordinating stripe and buttons)
Keypad
Engraving
Code
Omit = same as
unit
T = Translucent
Keypad Engraving Codes
-G = Generic
-S = Shades
-H = Hotel Room
-A = Auditorium / Classroom
-L = Lobby / Retail
-R = Restaurant
-M = Meeting Room
-B = Ballroom
-Z = Zone Toggle
11
Preset Dimming Controls
369315d 12 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
GRAFIK Eye QS Wireless (continued)
Standard Engraved Faceplate Kit (WH only) (continued)
Generic (-G) Meeting Room (-M)
Ballroom (-B)
Zone Toggle (-Z)
Shades (-S)
Hotel Room (-H)
Auditorium / Classroom (-A)
Lobby / Retail (-L)
Restaurant (-R)
1
2
4
3
Off
Open
Preset 1
Preset 3
Preset 2
Close
High
Medium
Nightlight
Low
Off
All On
Present
Exam
Lecture
All Off
All On
Morning
Evening
Afternoon
All Off
All On
Breakfast
Dinner
Lunch
All Off
All On
Meeting
Cleaning
A / V
All Off
All On
Event 1
Event 3
Event 2
All Off
Zone 1
Zone 2
Zone 4
Zone 3
Zone 5
* Standard engraving text does not automatically assign or re-assign system programming to the QS keypad buttons.
Project-specific customer input and programming by a Lutron service team member is still required to achieve a desired
sequence of operation / system functionality per control.
12
Preset Dimming Controls
369315d 13 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
QSGFP - -
Face-
plate
Prefix
Colour/
Finish
Number of
Window Treatment
Columns
Omit = none
1 = 1 column
2 = 2 columns
3 = 3 columns
Architectural Matte
Finishes
Standard
(ship in 48 hours)
White WH
Ivory IV
Beige BE
Gray GR
Brown BR
Black BL
Almond AL
Light Almond LA
Architectural Metal
Finishes
Bright Brass BB
Bright Chrome BC
Bright Nickel BN
Satin Brass SB
Satin Chrome SC
Satin Nickel SN
Antique Brass QB
Antique Bronze QZ
Anodised Aluminum
Finishes
Clear CLA
Black BLA
Brass BRA
Satin Colour Matte
Finishes
Snow SW
Biscuit BI
Eggshell ES
Taupe TP
Midnight MN
Limestone LS
Stone ST
Desert Stone DS
Terracotta TC
Hot HT
Goldstone GS
Palladium PD
Plum PL
Turquoise TQ
Bluestone BG
Sea Glass SG
Greenbrier GB
Sienna SI
Merlot MR
Mocha Stone MS
Top
Door
Colour
GRAFIK Eye QS Wireless (continued)
Faceplate Kit
(includes coordinating stripe and buttons; see Standard Colour Combinations page)
Faceplate Custom Colour/Finish Codes
Keypad
Engraving
Code
Keypad Engraving Codes
Omit = Unengraved
Ships with engraving certificate that
customer can redeem at no charge
SGN = Symbol-based Engraving
NST = Non-Standard Text
Engraving
Please visit the GRAFIK Eye QS website
at www.lutron.com/grafikeyeqs
for custom engraving forms. Submit
completed form with order, and unit will
ship engraved as specified by customer.
Omit = same as
unit
T = Translucent
OK
12
3
4
5
6910
11 12
13
14
7
815 16
9-16
1-8
OK
12
3
4
5
6910
11 12
13
14
7
815 16
9-16
1-8
Lighting
keypad
Window
treatment
column
1
2
3
4
13
Preset Dimming Controls
369315d 14 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
QSGB - 5B - WH -
Custom Button
Kit Prefix
Keypad
Engraving
Code
Button
Configuration
3BRL = 3-button with
raise/lower
(window
treatment
column)
5B = 5-button
(lighting keypad)
Button
Colour/
Finish
GRAFIK Eye QS Wireless
Custom Options and Model Numbers
See previous pages for Standard and Other Custom Model Numbers
See Standard Colour Combinations page for faceplate, stripe, and button colours
Custom Button Kit
Button Kit Custom
Colour/Finish Codes
Architectural Matte
Finishes
White WH
Ivory IV
Beige BE
Gray GR
Brown BR
Black BL
Almond AL
Light Almond LA
Satin Colour Matte
Finishes
Snow SW
Biscuit BI
Eggshell ES
Taupe TP
Custom Stripe Kit
QSGS - WH
Stripe
Kit
Prefix
Stripe Colour/
Finish
Stripe Custom Colour/Finish Codes
Same as Faceplate colours on previous page
Keypad Engraving Codes
Omit = Unengraved
Ships with engraving certificate that
customer can redeem at no charge
SGN = Symbol-based Engraving
NST = Non-Standard Text Engraving
Please visit the GRAFIK Eye QS website
at www.lutron.com/grafikeyeqs
for custom engraving forms. Submit
completed form with order, and unit will
ship engraved as specified by customer.
OK
12
3
4
5
6910
11 12
13
14
7
815 16
9-16
1-8
OK
12
3
4
5
6910
11 12
13
14
7
815 16
9-16
1-8
Lighting
keypad
Window
treatment
column
1
2
3
4
14
Preset Dimming Controls
369315d 15 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
GRAFIK Eye QS Wireless Standard Colour Combinations
See previous pages for Standard and Custom Model Numbers
Suffix Faceplate (F) Stripe (S) Button (B)
Architectural Matte
WH White Gray White
IV Ivory Beige Ivory
BE Beige Ivory Beige
GR Gray Black Gray
BR Brown Black Brown
BL Black Gray Black
AL Almond Light Almond Almond
LA Light Almond Almond Light Almond
Architectural Metal
BB Bright Brass Black Black
BC Bright Chrome Black Black
BN Bright Nickel Black Black
SB Satin Brass Black Black
SC Satin Chrome Black Black
SN Satin Nickel Black Black
QB Antique Brass Black Black
QZ Antique Bronze Black Black
Anodised
CLA Clear Black Black
BLA Black Black Black
BRA Brass Black Black
International Wallbox
AR Argentum Black Black
MC Mica Gray Black
AW Arctic White Gray White
Suffix Faceplate (F) Stripe (S) Button (B)
Satin Matte
MN Midnight Gray Black
TP Taupe Gray Taupe
SW Snow Gray Snow
ES Eggshell Beige Eggshell
BI Biscuit Eggshell Biscuit
LS Limestone Gray Gray
ST Stone Gray Gray
DS Desert Stone Taupe Taupe
TC Terracotta Taupe Taupe
BG Bluestone Gray Gray
HT Hot Taupe Taupe
MR Merlot Taupe Taupe
SI Sienna Brown Brown
GB Greenbrier Gray Gray
SG Sea Glass Gray Gray
MS Mocha Stone Taupe Taupe
GS Goldstone Ivory Ivory
PD Palladium Gray Gray
PL Plum Taupe Taupe
TQ Turquoise Gray Gray
LUTRON
F (faceplate)
F (faceplate)
B (buttons)
S (stripe)
Faceplate is comprised of a top and bottom.
The bottom will always be the colour indicated
under “faceplate.” The top may be the same
colour or translucent. Use the chart for
faceplates that have the same colour top
and bottom. If a translucent lid is chosen, the
stripe will automatically be the same colour as
the bottom lid.
Example:
If you order QSGRK-4PCE-1WH, your
GRAFIK Eye QS with 4 lighting zones and one
window treatment column will come with a
white faceplate (both top and bottom), gray
stripe, and white buttons.
1
2
3
4
15
Preset Dimming Controls
369315d 16 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
Wiring Diagrams
1234
12
ABC
123456LN
Load wiring
Communication link
Occupancy sensor/contact closure input and 24 V power
IR input
Terminations
16
Preset Dimming Controls
369315d 17 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
Power Group Wiring Example
LUTRON
On the QS link, there are devices that supply power and devices that consume power. Each device has a specific
number of Power Draw Units (PDUs) it either supplies or consumes. A Power Group consists of one device that
supplies power and one or more devices that consume power; each Power Group may have only one power-supplying
device. Refer to the QS Link Power Draw Units specification submittal (Lutron P/N 369405) for more information
concerning PDUs.
Within Power Groups on the QS link, connect all 4 terminals (1, 2, 3, and 4), shown by the letter A in the diagram.
Between devices on the QS link that supply power, connect only terminals 1, 3, and 4 (NOT terminal 2), shown by the
letter B on the diagram. Refer to the specific device documentation for wiring details.
Wiring can be T-tapped or daisy-chained.
Power Group 1
Power Group 2
Power Group 3
A
A
A
B
B
(Do not connect
terminal 2: 24 V-)
(Do not connect
terminal 2: 24 V-)
GRAFIK Eye QS
control unit
Supplies PDUs
QS Power Supply
Supplies PDUs
Energi Savr Node
unit Supplies PDUs
Control Interfaces
Consume PDUs
Control Interfaces
Consume PDUs
Wallstations
Consume PDUs
Wallstations
Consume PDUs
Wallstations
Consume PDUs
QS Sensor Module with
Occupancy Sensor
Consumes PDUs
B
(Do not connect
terminal 2: 24 V-)
Quantum Processor
Supplies PDUs
Wireless Occupancy Sensor
does not consume PDUs
Connect all 4
terminals within a
power group:
1: Common
2: 24 V-
3 and 4: Data
Connect only 3
terminals between
power groups:
1: Common
3 and 4: Data
Do not connect
Terminal 2: 24 V-
A
B
17
Preset Dimming Controls
369315d 18 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
Mounting
Line Voltage Wiring
Fits into a 4-gang
U.S. backbox,
90.4 mm deep
(Lutron P/N 245-254)
or
76.2 mm deep
(Lutron P/N 241-400)
1234
12
ABC
123456LN
Distribution Panel
230 V~ 50 Hz
1234
12
ABC
123456LN
To Load 1
To Load 2
To Load 3
To Load 4
To Load 5
To Load 6
Rear of
QS control unit
• Pull power wiring from distribution panel and to light fixtures.
• Each line voltage terminal can accept one 4.0 mm
2
wire.
• Consult Lutron for non-dim relay wiring and/or load side emergency transfer wiring.
Mounting
screws (4)
GRAFIK Eye®
QS control unit
Hinged
bottom lid
Hinged
top lid
Line voltage (hot/live)
is labeled L.
18
Preset Dimming Controls
369315d 19 01.17.20
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wireless Control Unit (230 V~ CE)
IEC PELV QS System Wiring
• Wiring can be daisy-chained or T-tapped.
• Wiring must be run separately from line/mains voltage.
• Total length of control link must not exceed 610 m.
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
QS
Control Unit
Sivoia QS
Window
Treatment
seeTouch QS
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
Daisy-Chain Wiring Example
T-Tap Wiring Example
QS
Control Unit
Sivoia QS
Window
Treatment
Sivoia QS
smart panel
Sivoia QS
smart panel
seeTouch QS
Wire Sizes (check compatibility in your area)
QS Link Wiring Length Wire Gauge Lutron Cable Part Number
Less than 153 m Power (terminals 1 and 2)
1 pair 1.0 mm
2
GRX-CBL-346S
GRX-PCBL-346S
Data (terminals 3 and 4)
1 twisted, shielded pair 0.5 mm
2
153 to 610 m Power (terminals 1 and 2)
1 pair 4.0 mm
2
GRX-CBL-46L
GRX-PCBL-46L
Data (terminals 3 and 4)
1 twisted, shielded pair 0.5 mm
2
)Lutron, Lutron, GRAFIK Eye, Quantum, seeTouch,
Sivoia, Softswitch, Tu-Wire, Pico, Hi-lume, EcoSystem,
Energi Savr Node, Radio Powr Savr, Clear Connect,
RadioRA 2 and RTISS are trademarks or registered
trademarks of Lutron Electronics Co., Inc. in the US and/or
other countries.
iPod is a trademark of Apple Inc. registered in the U.S. and
other countries.
All product names, logos, and brands are property of their
respective owners.
19
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Lutron electronics GRAFIK Eye QS Wireless Control Unit (230 V CE)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 21 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document