Fillable 369 477a (Lutron Electronics, Inc.)

Fill Online, Printable, Fillable, Blank 369 477a (Lutron Electronics, Inc.) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369 477a (Lutron Electronics, Inc.)

On average this form takes 7 minutes to complete

The 369 477a (Lutron Electronics, Inc.) form is 4 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 28 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-477a 1 09.01.11
Power Interfaces
LUT-LBX
®
LUT-LBX Synthetic Minimum Load
Model Number
LUT-LBX-WH
LUT-LBX-CE-WH
Input Power
120 V~
220 - 240 V~
Available Models
Description
•ProvidescapabilityforcertainLutrondimmersto
controllow-wattageloadsfrom0wattsuptothe
dimmer’sminimumrating
•Presentsasimulatedloadtothedimmertomeet
theminimumloadrequirementsevenwhenthe
actualloadissmaller.
•Workswithforwardphaseorleadingedgedim-
mersandreversephaseortrailingedgedimmers.
•Modelsavailablefor120V~and220-240V~
inputpower.
•This“load-side”equipmentinstallsonthezone
wiringinparallelwiththelightingload.
•Dissapatesamaximumof10wattswhenthe
controllingdimmerisnearhigh-end.
Works with:
•GRAFIKEyeR3000Seriescontrolunits
•LPRPMDimmimgModules
•HomeWorksRRPMDimmingModules
•HomeWorksRWPMDimmingModules
•Neutral-referencedLutrondimmers
•Two-wireLutrondimmers
1
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-477a 2 09.01.11
Power Interfaces
LUT-LBX
®
Input
•120V~100mA50/60Hz(LUT-LBX)
•220-240V~65mA50/60Hz(LUT-LBX-CE)
•Powerdissipationlessthan10watts
Sources/Load Types*
Operatesthesesourceswhenwiredinparallel
withtheload:
•Incandescent(Tungsten)
•Halogen
•MagneticLow-VoltageTransformer
•ElectronicLow-VoltageTransformer
•LutronTu-WireRElectronicFluorescentDimming
Ballast
•Neon/ColdCathode
•LEDlighting(refertoApplicationNote#138for
furtherdetails)
Terminals
Acceptsuptotwo12AWG(2.5mm
2
)wires.
Environment
32-104°F(0-40°C).Relativehumidity
lessthan90%non-condensing.
Mounting
Surfaceorrecessmountindoorsonly.
EMC Immunity
•Surgeprotectionupto6kV,3000A,
IEEEstd.C62.41
•ESDprotectionupto16kV
Specifications
*Thedimmermustberatedfortheloadtypebeing
used.TheLUT-LBXdoesnotchangetheapproved
loadtypesofthedimmer,justtheminimumload
requirement.Forexample,MLVloadsmuststillbe
usedwithMLVdimmers.
2
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-477a 3 09.01.11
Power Interfaces
LUT-LBX
®
Side View
Surface Mount without Faceplate
Recess Mount with Faceplate
4x4
Junction
Box
•Recessorsurfacemountinprovided4x4
junctionbox(LutronP/N241-496)3.5in
(89mm)deep.Indoorsonly.
•LUT-LBXgeneratesheat;mountonlywhere
ambienttemperatureis32-104°F
(0-40°C).
•Mountwitharrowsonyokefacingupto
ensureadequatecooling.
•Allow4.5in(114mm)aboveandbelowunit
andbetweenfaceplateswhenmounting
severalinaverticallayout.
•Forbetterheatdissipation,surfacemount
withoutfaceplate.
•Mountsoline(mains)voltagewiringisat
least6ft(1.8m)fromsoundorelectronic
equipmentandwiring.
•MountInterfacewithin7°oftruevertical.
Dimensions and Mounting
4.56in
(116mm)
4.56in
(116mm)
0.68in
(17mm)
1.87in
(48mm)
3
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-477a 4 09.01.11
Power Interfaces
LUT-LBX
®
•Pull12to16AWG(2.5-1.0mm
2
)Copper(Cu)wires(75°Cminimum)forinputpowerandloadcircuit.
•Strip0.5in(12mm)insulationfromwiresbeforeconnecting.
Wiring
NEUTRAL
EARTH/GROUND
DIMMED HOT/LIVE
Hot/Live DimmedHot/Live
Low-WattageLoad
Neutral
(ifnecessary)
120 V~ LUT-LBX
220-240 V~
LUT-LBX-CE
Dimmer
Circuit
NEUTRAL
EARTH/GROUND
DIMMED HOT/LIVE
Hot DimmedHot/Live,Zone1
Low-WattageLoad
Neutral
(ifnecessary)
Dimmer
Circuit
DimmedHot/Live
Zone2
Single-Zone Wiring
Dual-Zone Wiring
Neutral
Neutral
LUT-LBX(-CE)
LUT-LBX(-CE)
120 V~ LUT-LBX
220-240 V~
LUT-LBX-CE
4
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369 477a (Lutron Electronics, Inc.)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 20 July 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document