Fillable 3691052 ENG Adaptive Power Module SPEC (3691052)

Fill Online, Printable, Fillable, Blank 3691052 ENG Adaptive Power Module SPEC (3691052) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

3691052 ENG Adaptive Power Module SPEC (3691052)

On average this form takes 19 minutes to complete

The 3691052 ENG Adaptive Power Module SPEC (3691052) form is 17 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 77 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
HomeWorks QS LQSE-4A-120-D Phase Adaptive Power Module
3691052c 1 09.27.18
Phase Adaptive Power Module
The DIN Power Module (DPM) family is a group of
modular products for the control of lighting loads. This
document describes the following product:
LQSE-4A-120-D: 4-Zone DIN Power Module for
Dimming lighting loads
Features
• Phase Adaptive Power Modules can be used in a
HomeWorksQS system.
• Includes QS link for seamless integration of lights and
controls.
• An auto-detect mode is available to detect and
configure leading-edge or trailing-edge dimming for
incandescent / halogen, electronic / magnetic low-
voltage and neon / cold cathode light sources.
• Controls dimmable CFL / LED loads. Refer to
www.lutron.com/ledtool or App Note #478 (048478)
for compatibility with dimmable CFL / LED light
sources.
• SSL7 compliant for compatibility with solid state
lighting.
• RTISS Equipped technology compensates for
incoming line-voltage variations (up to ± 2% change
in frequency /second) such as changes in Root Mean
Square (RMS) voltage, frequency shifts, harmonics
and line noise.
• RTISS-TE operates on the trailing edge of the AC
sine wave. This allows for true instantaneous voltage
compensation.
• Provides air gap off (when all zones are off).
• Integral protection for common temporary over-current
and over-voltage conditions.
• LEDs on the module provide diagnostic information.
• Buttons on the module provide override control.
• Manual Override contact closure input (CCI).
• Power failure memory automatically returns the
outputs to the levels they were set to prior to a power
outage.
LQSE-4A-120-D
H
M
L
Input
Hi Temp
Prog
Power
Opt1
Opt2
Opt3
Def
Option
Ta > 70 ˚C
Prog
Def
Opt
1
2
3
CCI
Zn 1
400 W
Zn 2
250 W
Zn 3
250 W
Zn 4
250 W
LQSE-4A-120-D
H
M
L
lutron.com
Input
Entrada
Entrée
120 V~
10 A
50 / 60 Hz
1
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
HomeWorks QS LQSE-4A-120-D Phase Adaptive Power Module
3691052c 2 09.27.18
4
HN
Zn 1
Zn 2 Zn 3 Zn 4
Ta > 65 ˚C
Prog
120 V~ 5 A ea
1
2
3
Opt
CCI
COM
1
2
3
Def
MUX
COM
MUX
120 V~ 50 / 60 Hz
HomeWorks QS
LQSE-4T5-120-D
lutron.com
5 /16 in
8 mm
Input | Entrada
Entrée
4.4 in-lb
0.5 N
•
m
0-10 V-
50 mA
H
M
L
H
M
L
Input
Hi Temp
Prog
Power
Opt1
Opt2
Opt3
Def
Option
Ta > 70 ˚C
Prog
Def
Opt
1
2
3
CCI
Zn 1
400 W
Zn 2
250 W
Zn 3
250 W
Zn 4
250 W
LQSE-4A-120-D
H
M
L
lutron.com
Input
Entrada
Entrée
120 V~
10 A
50 / 60 Hz
Notes:
1
See "Output Zone Ratings" in “Specifications” section, for specific load types ratings.
System Example
QS Link
HomeWorks QS
Power Module
Adaptive Power
Module
GRAFIK
Eye QS
QS Contact
Closure
Interface
HomeWorks
QS Panel
HomeWorks QS
Processor
Sivoia QS
Shade / Drapery
Palladiom
Keypad
Contact Closure Input
Up to 100
total QS
devices
120 V~ Control Power
400 W Adaptive load
1
250 W Adaptive load
1
250 W Adaptive load
1
250 W Adaptive load
1
2
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
HomeWorks QS LQSE-4A-120-D Phase Adaptive Power Module
3691052c 3 09.27.18
Specifications
Adaptive Power Module
Power
• 120 V~ 5
0/60 Hz
• 10 A maximum total input current
• Lightning strike protection meets ANSI/IEEE standard
62.31-1980. Can withstand voltage surges of up to
6000 V and current surges of up to 3000 A.
• Contact Lutron for ungrounded delta feed applications.
Re
gulatory Approvals
• Lutron Quality Systems registered to ISO 9001.2015
• cULusR Li
sted
• NOM Certified
• SSL7A-2015
Environment
• See Mounting on page 4 for thermal specifications.
• Relative humidity: less than 90% non-condensing
• For indoor use only.
Output Zone Ratings
•
Each zone has no minimum load requirement.
• When programmed to "auto" mode, the unit starts in
trailing-edge and if an incompatible load is detected, it
will convert to leading-edge.
• Internal relay provides an air gap off when all zones
are off.
• One load type per zone.
• Output must not be used to control receptacles.
• If controlling plug-in lamps, installation must ensure a
method of preventing non-rated loads being plugged
into the unit. An example is a dedicated receptacle
with an alternate plug load such as a Duplex Dimming
Receptacle (NTR-15-DFDU-) and Dimming Lamp Plug
(RP-FDU-10-).
• Does not support non-dimmable loads.
• Output must be directly connected to the load.
• Output breakers or switches must not be used.
• Run a separate neutral for each load circuit.
A common neutral connection is not recommended.
• Unit may be powered by Ground Fault Circuit
Interrupter (GFCI) or Arc Fault Circuit Interrupter (AFCI)
if required. If using a GFCI or an AFCI incorporating
GFCI protection, maximum wire length between the
power module and the load must be less than 100
ft (30 m). Load circuit wiring (from breaker to unit to
load) must be run in its own non-metallic conduit, or
nuisance tripping may occur.
• For applications requiring 0–10 V- contr
ol, use Ten
Volt Interface (GRX-TVI) or the LQSE-4T5-120-D.
• For applications requiring higher wattage ratings, use a
power booster (PHPM-PA-120-WH).
• For applications requiring switching control, use a
PHPM-SW-DV
-WH interface or the LQSE-4S8-120-D.
3
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
HomeWorks QS LQSE-4A-120-D Phase Adaptive Power Module
3691052c 4 09.27.18
Specifications (continued)
Output Zone Ratings (continued)
•
No Derating is required if all the conditions below are met:
– Calibration point maximum is 158 ºF (70 ºC)
– Room ambient temperature is between 32 ºF and 86 ºF (0 ºC and 30 ºC)
–
Panel ambient temperature is between 32 ºF and 122 ºF (0 ºC and 50 ºC)
• 50 W Derating is required on all zones for a single module in a single non-ventilated DIN enclosure if:
– The room ambient temperature is between 86 ºF and 104 ºF (30 ºC and 40 ºC)
• 100 W Derating is required on all zones for multiple row non-ventilated DIN enclosure if:
–
The room ambient temperature is between 86 ºF and 104 ºF (30 ºC and 40 ºC)
Each zone is rated for the following wattage and load types
A, B
:
Load Type
Zone 1 Rating Zone 2, 3 and 4 Rating (per zone)
No Derating
5
0 W
Derating
100 W
Derating No Derating
50 W
Derating
100 W
Derating
LED
B
2 A2 A2 A2 A2 A2 A
Hi-lume A-series LTE
F
2 A (6 drivers
maximum)
2 A (6 drivers
maximum)
2 A (6 drivers
maximum)
2 A (6 drivers
maximum)
2 A (6 drivers
maximum)
2 A (6 drivers
maximum)
SSL7A-2015
E
100 W100 W100 W100 W100 W100 W
Incandescent / Halogen, ELV 400 W 350 W 300 W 250 W 200 W 150 W
Neon / Cold Cathode, MLV
D
400 VA (300 W
C
) 350 VA (260 W
C
) 300 VA (225 W
C
) 250 VA (190 W
C
) 200 VA (150 W
C
) 150 VA (110 W
C
)
A
Additional load type options are available in the HomeWorks QS software suite, some may require an interface. Contact Lutron for details.
B
Refer to www.lutron.com/ledtool or App note #478 (048478) for specific LED compatibility information and recommended LED light sources.
C
Actual lamp wattage.
D
Only use iron core transformers intended for use with an electronic switch or dimmer per Clause 8.3 of IEC / EN 60669-2-1
E
Complies with SSL7A-2015 when configured in the HomeWorks QS software suite to LED forward phase with low-end trim set to 10% and high-end trim
set to 90%.
F
Load type must be set to "Hi-lume 1% 2-Wire LTE LED", with low-end trim = 32% and high-end trim = 78%. Setting the proper trim and load type is
necessary to ensure optimal performance and 1% dimming capability.
4
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
HomeWorks QS LQSE-4A-120-D Phase Adaptive Power Module
3691052c 5 09.27.18
Specifications (continued)
Terminals (Torque, wire gauge & type ratings)
• Mains wiring: 5 in-lbs (0.6 N•m)
16 AWG to 10 AWG (1.0 mm² to 4.0 mm²)
(
single wire, solid or stranded)
• Zone wiring: 5 in-lbs (0.6 N•m)
16 AWG to 10 AWG (1.0 mm² to 4.0 mm²)
(
single wire, solid or stranded)
• CCI wiring: 5 in-lbs (0.6 N•m)
20 AWG to 10 AWG (0.5 mm² to 4.0 mm²)
(
single wire, solid or stranded)
20 AWG to 16 AWG (0.5 mm² to 1.5 mm²)
(two wires, solid or stranded)
• QS Link: 5 in-lbs (0.6 N•m)
Power (terminals 1 and 2): 1 pair 18AWG
to 12AWG (1.0mm
2
to 4.0mm
2
)
Data (terminals 3 and 4): 1 pair 22AWG
(0.5mm
2
), twisted and shielded
Out of Box Functionality
This section describes the default functionality when
the unit is first installed.
Manual Override Contact Closure Input (CCI)
• When the CCI is open, the unit will enter Manual
Override Mode, which will turn on all loads to their
manual override level and disable control of local
zones and QS devices.
• When the CCI is closed or jumpered, zones will
return to the settings or levels they were at prior to
entering manual override mode.
Note: Unit will process any sensor events received
while in manual override mode after it exits manual
override mode.
Normal Mode Operation
• By default each zone is set to an unassigned/Non-
Dim load type. Each zone will switch load on or off
until it is configured via unit programming. Once
configured, the load type cannot be changed back
to unassigned / Non-Dim.
• Zone and raise/lower buttons on the unit can be
used to:
– Turn loads on and off.
– Dim loads up and down.
5
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
HomeWorks QS LQSE-4A-120-D Phase Adaptive Power Module
3691052c 6 09.27.18
H
M
L
Input
Hi Temp
Prog
Power
Opt1
Opt2
Opt3
Def
Option
Ta > 70 ˚C
Prog
Def
Opt
1
2
3
CCI
Zn 1
400 W
Zn 2
250 W
Zn 3
250 W
Zn 4
250 W
LQSE-4A-120-D
H
M
L
lutron.com
Input
Entrada
Entrée
120 V~
10 A
50 / 60 Hz
Mounting
• See Lutron P / N 048466 at www.lutron.com for more
information on mounting and installation in panels with
integrated DIN rail.
• Unit is 12 DIN modules wide, 8.5 in (216 mm).
•
Mount in IP20 (minimum) rated consumer panel or
breaker panel with integrated DIN rail.
• Mount unit in orientation shown.
• Mount to DIN rail by pressing unit onto rail with clips
locked. To remove from rail, unlock clips using a
screwdriver.
• Mount in an accessible and serviceable location.
• Unit generates heat, maximum 75 BTUs / Hour.
• Mount unit such that all the conditions below are met:
– Room ambient temperature is between 32 ºF and 86 ºF
(0 ºC and 30 ºC)
– Temperature inside mounting panel, within 0.8 in
(20 mm) of unit, is between 32 ºF and 122 ºF
(0 ºC and 50 ºC)
– Calibration point maximum: 158 ºF (70 ºC)
Unlocked
4 mounting clips on unit
Locked
H
M
L
Input
Hi Temp
Prog
Power
Opt1
Opt2
Opt3
Def
Option
Ta > 70 ˚C
Prog
Def
Opt
1
2
3
CCI
Zn 1
400 W
Zn 2
250 W
Zn 3
250 W
Zn 4
250 W
LQSE-4A-120-D
H
M
L
lutron.com
Input
Entrada
Entrée
120 V~
10 A
50 / 60 Hz
Mechanical Dimensions
Front View
3.54 in
(90 mm)
8.50 in
(216 mm)
Left Side View
Calibration
point
3.54 in
(90 mm)
2.17 in
(55 mm)
2.75 in
(70 mm)
2.99 in
(76 mm)
6
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
HomeWorks QS LQSE-4A-120-D Phase Adaptive Power Module
3691052c 7 09.27.18
Overview of Wiring Terminals
QS
Link
Mains
Input
Load
Neutrals
Contact
Closure
Input
Phase Adaptive Outputs
Mains
Wiring
Zone
1
Zone
4
Zone
2
Zone
3
H
M
L
Input
Hi Temp
Prog
Power
Opt1
Opt2
Opt3
Def
Option
Ta > 70 ˚C
Prog
Def
Opt
1
2
3
CCI
Zn 1
400 W
Zn 2
250 W
Zn 3
250 W
Zn 4
250 W
LQSE-4A-120-D
H
M
L
lutron.com
Input
Entrada
Entrée
120 V~
10 A
50 / 60 Hz
L
L
N N N N N
DL1 DL2 DL3 DL4
7
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
HomeWorks QS LQSE-4A-120-D Phase Adaptive Power Module
3691052c 8 09.27.18
H
M
L
Input
Hi Temp
Prog
Power
Opt1
Opt2
Opt3
Def
Option
Ta > 70 ˚C
Prog
Def
Opt
1
2
3
CCI
Zn 1
400 W
Zn 2
250 W
Zn 3
250 W
Zn 4
250 W
LQSE-4A-120-D
H
M
L
lutron.com
Input
Entrada
Entrée
120 V~
10 A
50 / 60 Hz
L
L
N N N N N
DL1 DL2 DL3 DL4
Verify Wiring
• Apply power to loads to identify any load or wiring faults
prior to connecting loads to unit.
• To verify wiring:
1. Turn off power.
2. Connect loads directly to Hot to bypass the
unit and protect it from wiring faults.
3. Apply power, ensure the desired loads are
powered and properly wired.
4. Turn off power and connect loads to DL
terminals on unit for normal operation.
Neutral
Hot
Earth
120 V~
8
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
HomeWorks QS LQSE-4A-120-D Phase Adaptive Power Module
3691052c 9 09.27.18
Wiring from Distribution to Adaptive Power Module
• Turn off all circuit breakers or isolators feeding the
Adaptive Power Module at distribution panel.
• Run hot, neutral, and earth (
) wires from a
120 V~ 50/60 Hz feed to the power module.
• Run a separate neutral for each load circuit.
Mains Wiring and NECR Class 2 Separation
• Follow appropriate local and national codes to ensure
proper separation.
Dim Hot
Neutral
H
M
L
Input
Hi Temp
Prog
Power
Opt1
Opt2
Opt3
Def
Option
Ta > 70 ˚C
Prog
Def
Opt
1
2
3
CCI
Zn 1
400 W
Zn 2
250 W
Zn 3
250 W
Zn 4
250 W
LQSE-4A-120-D
H
M
L
lutron.com
Input
Entrada
Entrée
120 V~
10 A
50 / 60 Hz
Zone 1 Example
Mains Voltage Wiring
L
N N N N N
DL1 DL2 DL3 DL4
Load
Earth
Neutral
Hot
Distribution
Panel
(120 V~)
9
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
HomeWorks QS LQSE-4A-120-D Phase Adaptive Power Module
3691052c 10 09.27.18
NECR Class 2 Contact Closure Input
• Contact Closure Input (CCI) wiring is
NEC
® Class 2.
Follow all applicable national and local codes for
proper circuit separation and protection.
• Turn off all breakers or isolators feeding the
unit at distribution panel before servicing unit.
• The CCI is a local control only and cannot control
o
ther units over the QS link. A maximum of 32 units
may be connected in parallel to a Manual Override
device if the event is intended to affect multiple
devices.
• When in manual override mode, all zone outputs will
be at their programmed emergency light level
(configurable for each zone, default is 100%).
All sensors and controls are locked out.
• Contact closure input is normally closed (NC). The
unit is shipped with a jumper pre-installed.
Note: The unit will default to Manual Override Mode
if the CCI is left open. If no Manual Override Contact
Closure Input is required, leave the wire jumper in the
CCI terminals.
H
M
L
Input
Hi Temp
Prog
Power
Opt1
Opt2
Opt3
Def
Option
Ta > 70 ˚C
Prog
Def
Opt
1
2
3
CCI
Zn 1
400 W
Zn 2
250 W
Zn 3
250 W
Zn 4
250 W
LQSE-4A-120-D
H
M
L
lutron.com
Input
Entrada
Entrée
120 V~
10 A
50 / 60 Hz
L
Z
Zn 4
0 W
H
H
M
M
L
L
L
L
L
lu
utron.com
CCI
Common
Wiring: Contact Closure Input
CCI COM
Note: Shown with
pre-installed jumper.
10
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
HomeWorks QS LQSE-4A-120-D Phase Adaptive Power Module
3691052c 11 09.27.18
Wiring: QS Link
QS Link NECR Class 2 Wiring
• Follow all applicable national and local codes for proper
circuit separation and protection.
• Link communicates using NECR Class2 wiring.
• Wiring may be daisy chained or t-tapped.
• Do NOT connect terminal 2.
H
M
L
Input
Hi Temp
Prog
Power
Opt1
Opt2
Opt3
Def
Option
Ta > 70 ˚C
Prog
Def
Opt
1
2
3
CCI
Zn 1
400 W
Zn 2
250 W
Zn 3
250 W
Zn 4
250 W
LQSE-4A-120-D
H
M
L
lutron.com
Input
Entrada
Entrée
120 V~
10 A
50 / 60 Hz
L
H
H
M
L
L
L
L
L
lu
lutron.com
(1) COM
(2) Do Not Connect Teminal 2
1
(3) MUX
(4) MUX
Palladiom
Keypads
Palladiom
Keypads
QSE-CI-DMX
QSE-CI-DMX
Daisy-Chain Wiring Example
T-Tap Wiring Example
1
Unit does not consume or supply PDUs on
the QS link. Do not connect the 24 V- wire
to unit.
Note: 24 V- wire must bypass the unit
if other devices on the link consume
PDUs.
)Lutron, Lutron, HomeWorks, RTISS Equipped, GRAFIK Eye,
Palladiom, Hi-lume, Sivoia, and seeTouch are trademarks of
Lutron Electronics Co., Inc. registered in the U.S. and other
countries.
RTISS-TE is a trademark of Lutron Electronics Co., Inc.
UL is a trademark of UL LLC.
NEC is a registered trademark of National Fire Protection
Association, Quincy, Massachusetts.
QS Link Wiring Options
Control
Link
Length
Wire Gauge (for terminals)
Available from
Lutron
in one cable:
Less
than
500ft
(153m)
Power (terminals 1 and 2):
1 pair 18AWG (1.0mm
2
)
GRX-CBL-346S
Data (terminals 3 and 4):
1 pair 22AWG (0.5mm
2
), twisted
and shielded*
500ft
(153m)
to
2000ft
(610m)
Power (terminals 1 and 2):
1 pair 12AWG (4.0mm
2
)
GRX-CBL-46L
Data (terminals 3 and 4):
1 pair 22AWG (0.5mm
2
), twisted
and shielded*
11
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

3691052 ENG Adaptive Power Module SPEC (3691052)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 19 May 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document