SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
369683c 1 03.24.20
Wallbox ControlsLED
+
DimmerSkylark Contour
Skylark Contour LED
+
Dimmer
Dimmer for dimmable LED, CFL, halogen, and
incandescent bulbs.
Features
On / off rocker switch with a captive linear-slide
dimmer for a standard designer wallplate opening.
• LED
+
includes the most advanced technology
for superior dimming of LED, CFL, halogen, and
incandescent bulbs.
UL Listed to control:
Dimmable LEDs
Dimmable compact fluorescent lamps (CFL) with
integrated ballast
Lutron LTEA Hi-lume 1% forward-phase
LED driver
Halogen
Incandescent
Low-end adjustment to accommodate a wide range
of bulbs.
100% factory tested.
Formerly C•L.
Application Requirements
When dimming LEDs or CFLs, only bulbs
marked or rated as DIMMABLE may be used.
For a complete list of compatible DIMMABLE LEDs
please visit www.lutron.com/LEDfinder
Some DIMMABLE LEDs and CFLs require a
minimum number of bulbs for proper operation.
For details and a list of bulbs, please visit
www.lutron.com/LEDfinder
Model Number
CTCL-153P-XX
1, 2
Single pole / 3-way
3
CTCL-153PH-XX-C
4
Single pole / 3-way
3
1
“XX” in the model number represents color / finish code; see
"Colors and Finishes" on next page.
2
For clamshell packaging, add "H" after "153P".
3
For 3-way and 4-way switching, use Claro switches or other
mechanical switches.
4
Clamshell packaged product for Canada.
Switch on
(to selected
light level),
and off
Select
light level
with slider
* Wallplate sold separately
1
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
369683c 2 03.24.20
Wallbox ControlsLED
+
DimmerSkylark Contour
Specifications
Regulatory Approvals
UL Listed to US and Canadian safety requirements
UL1472 / CSA C22.2 184.1
• NOM
Power and Ratings
120 V~ 60 Hz
150 W dimmable LED / CFL
or
600 W incandescent / halogen
or
Mixed bulb type per Multigang and Mixed Bulb
Type Ratings table (see page 3)
or
250 W Lutron LTEA Hi-lume 1% forward-phase
LED driver (max 6 drivers)
Environment
For indoor use only.
Operating temperatures 32°F to 104°F (0°Cto 40°C).
Performance
Power-failure memory
Captive linear slider
Electrostatic discharge tested
Precise color matching
Mechanical air-gap switch to disconnect load power
Warranty
1 Year Limited Warranty
For additional Warranty information, please visit
www.lutron.com/TechnicalDocumentLibrary/
369-119_Wallbox_Warranty.pdf
Dimensions
4.69 in
(119 mm)
2.94 in
(75 mm)
2.75 in
(70 mm)
0.30 in
(7.6 mm)
1.31 in
(33 mm)
Note: Requires a U.S. wallbox 2` in (64 mm)
deep minimum.
Colors and Finishes
Gloss Finishes
Add color / finish code to model #
Example: CTCL-153P-WH
WH White
IV Ivory
AL Almond
LA Light Almond
GR Gray
BR Brown
BL Black
2
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
369683c 3 03.24.20
Wallbox ControlsLED
+
DimmerSkylark Contour
Multigang and Mixed-Bulb-Type Ratings
When installing more than one dimmer in the same wallbox, it may be necessary to remove some side sections
prior to wiring (see diagram). Removal of dimmer side sections may reduce maximum wattage, as shown in
the chart below.
Mixing bulb types (using a combination of LED / CFL, and incandescent / halogen bulbs) will also affect the
maximum ratings, as shown in the chart below.
Each dimmer has inside
sections removed
Middle dimmer has two side
sections removed
Do not remove outside
sections
Total LED / CFL
Wattage Installed
(Wattage per bulb x # of bulbs)
Maximum Allowable Incandescent/Halogen Wattage
No sides removed 1 side removed 2 sides removed
0 W + 600 W 500 W 400 W
1 W – 25 W + 500 W 400 W 300 W
26 W – 50 W + 400 W 300 W 200 W
51 W – 75 W + 300 W 200 W 100 W
76 W – 100 W + 200 W 100 W 50 W
101 W – 125 W + 100 W 50 W 0 W
126 W – 150 W + 0 W 0 W 0 W
*EXAMPLE: If one set of side sections is removed and you have three 10 W LED bulbs installed
(Total LED Wattage = 30 W), you may add up to 300W of incandescent or halogen
lighting.
3
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
369683c 4 03.24.20
Wallbox ControlsLED
+
DimmerSkylark Contour
Switch
1
Turns lights ON and OFF.
Controls light level.
Up
Increases light level
Down
Decreases light level
Slider
2
IMPORTANT: Set slider to
bottom before adjusting
dimming range.
Operation (View with wallplate removed)
1
2
3
1
2
3
1
2
3
1
2
3
Up (clockwise)
Decreases brightness
Down
(counter-clockwise)
Increases brightness
Sets low end dimming limit.
Adjustment dial
3
Up (clockwise)
Increases brightness
Down
(counter-clockwise)
Decreases brightness
Sets low end dimming limit.
Adjustment lever
3
OR
Lever-type Adjustment Dial
Wheel-type Adjustment Dial
4
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
369683c 5 03.24.20
Wallbox ControlsLED
+
DimmerSkylark Contour
Wiring Diagrams
Single-Pole Wiring
3-Way Wiring
4-Way Wiring
Note for 4-Way Wiring:
Dimmer must be installed
Line Side or Load Side. It
cannot be installed in the
4-way location.
Line /
Hot
Black
Dimmer
Red
Red/White
Green
Neutral
120 V~
60 Hz
Lighting
Load
Line /
Hot
Black
Dimmer
Red
Red/
White
Green
Neutral
120 V~
60 Hz
Lighting
Load
3-Way
Switch
OR
Dimmer
Line Side
Line /
Hot
Black
Dimmer
Red
Red/
White
Green
Neutral
120 V~
60 Hz
Lighting
Load
3-Way
Switch
Dimmer
Load Side
Line /
Hot
Black
Dimmer
Red
Red/
White
Green
Neutral
120 V~
60 Hz
Lighting
Load
3-Way
Switch
Dimmer
Line Side
4-Way
Switch
Line /
Hot
Black
Dimmer
Red
Red/
White
Green
Neutral
120 V~
60 Hz
Lighting
Load
3-Way
Switch
Dimmer
Load Side
4-Way
Switch
OR
* **
*
***
*
*** ***
* **
*
***
**
* **
*
* **
* **
***
*
***
*** ***
* Brass / Gold screw terminal
** Copper / Black screw terminal
*** Green screw terminal
Please refer to the switch's
instruction sheet for proper
wiring.
The Lutron logo, Lutron, Skylark
Countour, Hi-lume, LED
+
, C)L, and
Claro are trademarks or registered
trademarks of Lutron Electronics Co.,
Inc. in the US and/or other countries.
All other product names, logos, and
brands are property of their respective
owners.
5