Fillable XPS-E-120277-FT 369647a Softswitch128 Expansion Module Spec

Fill Online, Printable, Fillable, Blank XPS-E-120277-FT 369647a Softswitch128 Expansion Module Spec Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

XPS-E-120277-FT 369647a Softswitch128 Expansion Module Spec

On average this form takes 14 minutes to complete

The XPS-E-120277-FT 369647a Softswitch128 Expansion Module Spec form is 8 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 56 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Switching Systems Expansion Module Power Equipment
369-647a 1 06.04.12
Softswitch128R Expansion Module
The Softswitch128R Expansion Module adds scalability
to LutronR Softswitch128R switching system. The
Expansion Module allows a system to maintain a
single programming controller and timeclock with an
increased number of switched circuits, panels, and
control stations.
Features
•Providesincreasednumberoflinks:3linkswithupto
32controlstationsperlink,96controlstationstotal
per system.
•Onemastertimeclockandoneprogrammingpointfor
the entire expanded system.
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Switching Systems Expansion Module Power Equipment
369-647a 2 06.04.12
Standards
•ULRListed(Reference:ULFileE42071)
•CSACertied
•SeismicCertied(TestMethodAC156.ReferenceOSHPDPreapprovalOSP-0215-10)
•Othercerticatesmayapply
Power
•Inputvoltage:120/277V~or220-240V-50/60Hz
•Linkvoltage:24V-FullWave
System Communication and Capacity
•Three(3)daisy-chained,low-voltageIECPELV/NECRClass2linksconnectExpansionModuletoswitching
panels and control stations
•OneExpansionModulepersystem
Physical Design
•Enclosure:NEMA-Type1,IP-20protection;16U.S.GaugeSteel.Indooruseonly.
•Weight:27lb(13kg)
•SeismicCertificationLimits:S
DS
=2.5g,z/h=1.0,I
P
=1.5.ContactLutronfordetails.
Mounting
•Surfacemountorrecessmountbetween16in(40cm)studs
Environment
•32to104°F(0to40°C).Relativehumiditylessthan90%non-condensing.
Model Numbers
 ModelNumber FeedVoltage
 XPS-E-120/277-FT 120or277V~
 XPS-E-240FT-CGP1728 220-240V-
Specifications
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Switching Systems Expansion Module Power Equipment
369-647a 3 06.04.12
Dimensions
Alldimensionsshownas:in(mm).
TopView
LeftSideView
RightSideView
FrontView
BottomView
9.25(235)
10.50(267)
1.62(41)
0.95(24)
6.75(171)
14.00
(356)
17.50
(445)
4.625
(117)
10.00(254)
4.15
(105)
0.15
(4)
3
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Switching Systems Expansion Module Power Equipment
369-647a 4 06.04.12
•Forindooruseonly.
•Consultdimensionspageformodulesize,conduitknockouts,andmountingholes.
•Mountwhereambienttemperatureis32to104°F(0to40°C).
•Reinforcewallstructureforweightandlocalcodesasnecessary.
•Mountmodulesoline(mains)voltagewiringisatleast6ft(1.8m)fromsoundorelectronicequipmentandwiring.
•Mountwithin7°oftruevertical.
Surface Mounting
•Lutronrecommendsusing0.25in(6mm)
mounting bolts.
•Leave1.25in(38mm)clearanceoneachsideof
moduleforcover.
Recess Mounting
•Mountmodulefromflushto0.125in(3mm)below
finished wall surface.
•Leave1.25in(38mm)clearanceoneachsideof
moduleforcover.
FrontView SideView
FrontView SideView
Mounting
FeedWiring
IECPELV/
NECRClass2
Wiring
FeedWiring
IECPELV/
NECRClass2
Wiring
4
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Switching Systems Expansion Module Power Equipment
369-647a 5 06.04.12
H
H
H
HH
H
N
N
N
{
Wiretoeitherthe120V~ or
the277V~ feed terminals,
not both. The terminals for
theunusedvoltagewillremain
empty.
* 120V~Hotterminalis
protected by an internal
fuseincase277V~ is
mistakenlyapplied.Aspare
fuse is also supplied in the
module.
120V~
Feed
277V~
Feed
OR
120V~*
277V~
120V*
120V*
120V*
Ground
Ground
Neutral
Neutral
Donotwireto
these terminals
Wiring Overview - 120/277 V~
XPS-E-120/277-FTmodelnumbermaybewiredwitheither120or277V~.
5
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Switching Systems Expansion Module Power Equipment
369-647a 6 06.04.12
•Daisy-chaintheExpansionModuletotheIECPELV/NECRClass2Linkthatconnectsswitchingpanelstocontrol
stations.
•Therearethreeseparatedaisy-chainlinks.
•Makedaisy-chainconnectionstothelow-voltageIECPELV/NECRClass2Linkterminalsinsidethe
Expansion Module.
•DonotuseT-taps.Runallwiresinandoutoftheterminalblock.
•Eachterminalacceptsuptotwo18AWG(1.0mm
2
)wires.
•LEDsA,B,andClightwheneachofthetheIECPELV/NECRClass2Linksareinstalledcorrectly,respectively.
LEDsblinkoncepersecond.
•InstallLinkTerminators(LT-1)atthestartandendofeachIECPELV/NECRClass2Link.
Important Notes
•TheMasterSoftswitch128RPanelmaybeanyonepanelonthethreelinks.AllSoftswitch128RPanelshavethe
capability to be a master.
•32ControlStationsmaybeinstalledperlink.
•Itispermissibleforalinktoconsistofonlycontrolstations.
•TheExpansionModulemayormaynotbeattheendofanycontrollink.Itcanbeconnectedinthemiddleof
the link.
IECPELV/NECRClass2wiringlinkrequires:
•Two12AWG(2.5mm
2
)conductorsforcontrolwiring.
•Oneshielded,twistedpair18AWG(1.0mm
2
)fordatalink.
Master
XPS
Panel
Remote
XPS
Panel
Remote
XPS
Panel
Expansion
Module
LinkA
Link B
LinkC
Control
Station
Control
Station
Control
Station
Control
Station
Control
Station
Control
Station
Control
Station
To additional
ControlStations
andPanels
To additional
ControlStations
andPanels
To additional
ControlStations
andPanels
Low-Voltage IEC PELV/NECR Class 2 Wiring
Example of IEC PELV/NECR Class 2 Wiring
6
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Switching Systems Expansion Module Power Equipment
369-647a 7 06.04.12
IEC PELV/NECR Class 2 Wiring: Expansion Module to Switching Panel
5D4321
1234D5
ControlWiring
(2)12AWG
(2.5mm
2
)
1:Common
2:24V-
DataLink
(1)shielded,
twisted pair
18AWG
(1.0mm
2
)
3:MUX
4:MUX
(1)18AWG
(1.0mm
2
)
5:SenseLine
Shield/Drain
Softswitch128R
Expansion Module
Softswitch128R
controller
To additional
panels and
control stations
7
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Switching Systems Expansion Module Power Equipment
369-647a 8 06.04.12
•Two12AWG(2.5mm
2
)conductorsforcommon(terminal1)and24V-(terminal2).Thesewillnotfitin
terminals.Connectasshown.
•Onetwisted,shieldedpair18AWG(1.0mm
2
)fordatalink(terminals3and4).
•ConnectDrain/Shieldasshown.DonotconnecttoGround(Earth)orWallstation/Controlinterfaces.
Connectthebaredrainwiresandcutofftheoutsideshield.
•IfEmergancypanelsarepresentinthesystem,connectEmergencySenselinetoterminal5onExpansion
Modulelinkterminal(s).
FortheIECPELV/NECRClass2link,useGRX-CBL-46Lorequivalent.Thecableconsistsof:
•Two12AWG(2.5mm
2
)wires.
•One18AWG(0.625mm
2
)shielded,twistedpair.
•One18AWG(1.0mm
2
)wireforEmergencySense.
IEC PELV/NECR Class 2 Terminal Connections
1:Common
(2)12AWG
(2.5mm
2
)
2:24VFW
(2)12AWG
(2.5mm
2
)
18AWG
(1.0mm
2
)
18AWG
(1.0mm
2
)
Drain/Shield
3:MUX
4:MUX
(1)twisted,
shielded pair
18AWG
(1.0mm
2
)
Emergency
8
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

XPS-E-120277-FT 369647a Softswitch128 Expansion Module Spec

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 19 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document