369-403a 1 1.21.2011
Vierti®LUTRON® Controls & Accessories
Halogen/Incandescent/Magnetic Low-Voltage Dimmer
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
2 Location Wiring
Single-Pole Wiring (Multi-Location)
Hot
120 V
60 Hz
Neutral
Light Fixture
Brass
Black
Green
Ground
Dimmer
Blue
3, 4 or 5 Location Wiring
Blue
Hot
120 V
60 Hz
Neutral
Light
Fixture
Brass
Black
Green
Ground
For 2 locations, place Dimmer in any location and
fill the other location with a Companion Dimmer.
For 3 to 5 locations, place Dimmer in any location and fill the
remaining locations with Companion Dimmers.
Wiring Diagrams
Single-Pole Wiring
Hot
120 V
60 Hz
Neutral
Light Fixture
Brass
Black
Green
Ground
Dimmer
Blue
Brass
Black
Green
Ground
Blue
Brass
Black
Green
Ground
Companion Companion
Dimmer
Blue
Hot
120 V
60 Hz
Brass
Black
Green
Ground
Companion
Blue
Brass
Black
Green
Ground
Dimmer
Neutral
Light
Fixture
Description
•Single-TouchDimmer.
•Fullfamilyofcontrols,pluscoordinatingaccessoriesandwallplates.
•Dimmersfeaturebuilt-insoft-glowlocatorlight.
•UsesstandardSingle-Poleand3-Waywiringforeasyinstallation.
•Maximumtotalwirelengthbetweenalldevicesis75ft(23m).
VT-600-
-
Single-Pole 600 W / VA 120 V
VT-600M- -
Single-Pole / Multi-Location 600 W / VA 120 V
VT-1000M- -
Single-Pole / Multi-Location 1000 W / VA 120 V
Model Numbers
- LED Color - Wallplate Color/Finish
Minimum Load Chart*
Single-Pole 40 W / VA
1 Dimmer and 1 Companion Dimmer 60 W / VA
1 Dimmer and 2 Companion Dimmers 80 W / VA
1 Dimmer and 3 Companion Dimmers 100 W / VA
1 Dimmer and 4 Companion Dimmers 135 W / VA
* Vierti®DimmersandCompanionDimmershaveminimum
load requirements. Do not use where the total lamp wattage
is less than the minimum load shown in the chart.
1
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 2 1.21.2011
Vierti®LUTRON® Controls & Accessories
Halogen/Incandescent/Magnetic Low-Voltage Dimmer With Neutral Connection
Wiring Diagrams
Description
•Single-TouchDimmer.
•Fullfamilyofcontrols,pluscoordinatingaccessoriesandwallplates.
•Requiresneutralconnection.
•5Wattminimumload.
•DesignedtoworkwithPHPMinterfaces.
•UsesstandardSingle-Poleand3-Waywiringforeasyinstallation.
•Maximumtotalwirelengthbetweenalldevicesis250ft(76m).
VT-1000MN-
-
Single-Pole / Multi-Location 1000 W / VA 120 V
With Neutral Connection
Model Number
- LED Color - Wallplate Color/Finish
Single-Pole Wiring
2 Location Wiring
For 2 locations, place Main Dimmer on load side and fill the
remaining location with Companion Dimmer.
3, 4 or 5 Location Wiring
For 3 to 5 locations, place Main Dimmer on load side and fill the remaining locations with Companion Dimmers.
Hot
120 V
60 Hz
NeutralNeutral
Brass Blue
Silver
Black
Green
Ground
Main Dimmer
Blue
BlueBrass Brass
Black
Black
Silver
GreenGreen
Ground
Hot
Companion Main Dimmer
Ground
Neutral
Neutral
120 V
60 Hz
Companion
Main Dimmer
Companion
Blue
120 V
60 Hz
Neutral
Brass
Black
Silver
Green
Ground
Hot
BlueBrass
Black
Green
Ground
Blue
Neutral
Brass
Black
Green
Ground
Light
Fixture
Light
Fixture
Light
Fixture
2
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 3 1.21.2011
Vierti®LUTRON® Controls & Accessories
Description
•Single-TouchDimmer.
•Fullfamilyofcontrols,pluscoordinatingaccessoriesandwallplates.
•Dimmersfeaturebuilt-insoft-glowlocatorlight.
•UsesstandardSingle-Poleand3-Waywiringforeasyinstallation.
•Maximumtotalwirelengthbetweenalldevicesis250ft(76m).
Wiring Diagrams
Single-Touch Electronic Low-Voltage Dimmer
VTELV-600M- -
Single-Pole/Multi-Location 600 W 120 V
Model Number
Single-Pole Wiring
2 Location Wiring
For 2 locations, place Main Dimmer on load side and fill the
remaining location with Companion Dimmer.
3, 4 or 5 Location Wiring
For 3 to 5 locations, place Main Dimmer on load side and fill the remaining locations with Companion Dimmers.
- LED Color - Wallplate Color/Finish
Hot
120 V
60 Hz
NeutralNeutral
ELV
Transformer
ELV
Transformer
ELV
Transformer
Brass Blue
Silver
Black
Green
Ground
Main Dimmer
Blue
BlueBrass
Brass
Black Black
Silver
GreenGreen
Ground
Hot
Companion Main Dimmer
Ground
Neutral
Neutral
120 V
60 Hz
Companion
Main Dimmer
Companion
Blue
120 V
60 Hz
Neutral
Brass
Black
Silver
Green
Ground
Hot
BlueBrass
Black
Green
Ground
Blue
Neutral
Brass
Black
Green
Ground
3
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 4 1.21.2011
Vierti®LUTRON® Controls & Accessories
Description
•Single-TouchDimmer.
•Fullfamilyofcontrols,pluscoordinatingaccessoriesandwallplates.
•Dimmersfeaturebuilt-insoft-glowlocatorlight.
•UsesstandardSingle-Poleand3-Waywiringforeasyinstallation.
•Maximumtotalwirelengthbetweenalldevicesis250ft(76m).
Wiring Diagrams
Single-Touch Fluorescent Dimmer
VTF-6AM- -
Single-Pole/Multi-Location6A120/277V
Lutron3-WireDimmingBallast:Hi-lume®, Eco-10®,
Compact SETM, EcoSystem® or Hi-lume LED
Model Number
- LED Color - Wallplate Color/Finish
Single-Pole Wiring of a Multi-Location Control
Hot
Neutral
120 V or 277 V
60 Hz
Black Terminal
Dimmer
Blue Terminal
Green
Wire
Brass Terminal
Orange Wire
Silver Terminal
Black
Orange
White
Lutron® 3-Wire Dimming Ballast
in Light Fixture
3, 4 or 5 Location Wiring
For 3–5 locations, place Main Dimmer on load side and fill the remaining locations with Companion Dimmers.
Companion
Dimmer
Hot
Neutral
Brass
Terminal
Blue
Terminal
Black
Terminal
Blue
Terminal
Black
Orange
White
Green
wire
Green
wire
120 V
or 277 V
60 Hz
Lutron® 3-Wire Dimming Ballast in
Light Fixture
Main
Dimmer
Black Terminal
Brass Terminal
Orange Wire
Silver Terminal
4
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 5 1.21.2011
Vierti®LUTRON® Controls & Accessories
Single-Touch Companion Dimmer
Note: See Wiring Diagram for load specific Main Dimmer.
Description
•Single-TouchCompanionDimmer.
•Fullfamilyofcontrols,pluscoordinatingaccessoriesandwallplates.
•Dimmersfeaturebuilt-insoft-glowlocatorlight.
•Usesstandard3-Waywiringforeasyinstallation.
VT-AD- -
Multi-location 8.3 A 120 V
6A 277V
Model Number
- LED Color - Wallplate Color/Finish
5
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 6 1.21.2011
Vierti®LUTRON® Controls & Accessories
Blue
Blue
Neutral
Brass
Brass
Black
Black
Silver
GreenGreen
Ground
Hot
Ground
Neutral
120/277 V
60 Hz
Light or Fan
Fixture(s)
Description
•Single-TouchElectronicSwitch.
•Fullfamilyofcontrols,pluscoordinatingaccessoriesandwallplates.
•Switchesfeaturebuilt-insoft-glowlocatorlight.
•UsesstandardSingle-Poleand3-Waywiringforeasyinstallation.
•Maximumtotalwirelengthbetweenalldevicesis250ft(76m).
•Requiresneutralconnection.
Wiring Diagrams
Single-Touch Electronic Switch
VT-S6AM- - (No Longer Available)
Single-Pole/Multi-Location 6 A
3 A , 120 V
Model Numbers
Single-Pole Wiring
2 Location Wiring
For 2 locations, place Main Switch on load side and fill the
remaining location with Companion Switch.
3, 4 or 5 Location Wiring
For 3–5 locations, place Main Switch on load side and fill the remaining locations with Companion Switches.
Blue
120/277 V
60 Hz
NeutralNeutral
Brass
Black
Silver
Green
Ground
Electronic Switch
Hot
Light or Fan
Fixture(s)
Companion Switch
Main Switch
Blue
120/277 V
60 Hz
Neutral
Brass
Black
Silver
Green
Ground
Hot
Companion Switch
Blue
Neutral
Brass
Black
Green
Light or Fan
Fixture(s)
Main Switch
Blue
Brass
Black
Green
Companion Switch
Ground Ground
VT-S6AMUNV- -
Single-Pole/Multi-Location 6 A
3 A , 120 V
6 A
,277V
- LED Color - Wallplate Color/Finish
VT-S6AM-277- - (No Longer Available)
Single-Pole/Multi-Location 6 A
,277V
6
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a71.21.2011
Vierti®LUTRON® Controls & Accessories
Single-Touch Companion Switch
Note: See Wiring Diagram for load specific Main Switch.
Description
•Single-TouchCompanionSwitch.
•Fullfamilyofcontrols,pluscoordinatingaccessoriesandwallplates.
•Switchesfeaturebuilt-insoft-glowlocatorlight.
•Usesstandard3-Waywiringforeasyinstallation.
VT-AS- -
Multi-location 8.3 A 120 V
6A 277V
Model Number
- LED Color - Wallplate Color/Finish
7
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 8 1.21.2011
Vierti®LUTRON® Controls & Accessories
Power
•120V
60Hzor277V 60Hz
Key Design Features
•MeetsANSI/IEEEC62.41-1980.Testedtowithstandvoltagesurgesofupto6000V
and current surges of up to 200 A without damage.
•Testedtowithstandelectrostaticdischargesupto16000Vwithoutimpairment.
•Lightingcontrolprovidesfull-range,continuouslyvariablecontrol of light intensity.
DimmerprovidessmoothandcontinuousSquareLawdimmingcurveforthefull
slidertravelonitsratedloadpertheIESNALightingHandbook,9thedition,pg.27-4.
•Mechanicalair-gapswitchprovidesatrueoffconditionwithnoleakagecurrent
presentatthefixture(s).MeetstheapplicablerequirementsofUL1472forinclusion
ofavisible,accessibleair-gapoffswitch.
•Dimmeriscapableofoperatingattheratedcapacity;thisincludesmodified
capacitiesforgangingconfigurationswhichrequiretheremovaloffins.
•Controlisdesignedtoreduceinterferencewithradio,audio,andvideoequipment.
•Built-inpower-failurememoryallowsthelightstocomebackontothesame
levelsetpriortoapowerinterruption.
•Includesseamlesswallplateswithnovisiblemeansofattachment.
•Toensureaprecisecolormatchbetweenallplasticparts,colorvariationofany
controlwillnotexceedadeltaEof1,CIEL*a*b*colorunits(ASTME308-99).
•Visiblepartsofcontrolandwallplatearemanufacturedfromdurablepolycarbonate
plastic with a matte finish.
•Visiblepartsofcontrolandwallplateexhibitultravioletstabilitywhentested
withmultipleactiniclightsources(ASTMD4674-89).
•Controlprovidesfrequencycompensationtoassuredimmingcapabilityon
50or60Hzlines.
Environmental
•Operatingtemperature: 32 to 104 ºF (0 to 40 ºC)
•Storagetemperature: 32to185ºF(0to85ºC)
•Relativehumidity: 90%non-condensing(maximum)
Agency Approvals
•UL
•CSA
•NOM
Control Specifications
8
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 9 1.21.2011
Vierti®LUTRON® Controls & Accessories
Key Design Features
•Thefrontofthetwo-partwallplatesnapssecurelyontotheadapterplate
to conceal the screws.
•Seamlessmultigangwallplateswithsnap-inauto-alignmentadapterplate
•Toensureaprecisecolormatchbetweenallplasticparts,colorvariation
ofanycontrolwillnotexceedadeltaEof1,CIEL*a*b*colorunits
(ASTM E 308-99).
•Visiblepartsofcontrolandwallplatearemanufacturedfromdurable
polycarbonate plastic with either a matte finish or metal finish.
•Visiblepartsofcontrolandwallplateexhibitultravioletstabilitywhen
testedwithmultipleactiniclightsources(ASTMD4674-89).
Wallplate Specifications
Color Suffix
Matte Finish
White WH
Ivory IV
Almond AL
Light Almond LA
Gray GR
Brown BR
Black BL
Taupe TP
Sienna SI
Colors/Finishes
Addcolorsuffixtomodel#
Example:VTW-1-WH
Color Suffix
Metal Finish
Satin Brass SB
Bright Brass BB
Bright Chrome BC
Special Metal Finish
Antique Brass QB
AntiqueBronze QZ
Satin Chrome SC
SatinNickel SN
BrightNickel BN
Anodized Aluminum Finish
ClearAnodized CLA
BlackAnodized BLA
BrassAnodized BRA
Note: Architectural metal finishes are
mountedonblackplasticandinclude
ablackadapterplate.
When ordering metal finish
wallplates for a product color
other than black contact Customer
Service at 1.888.LUTRON1.
9
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 10 1.21.2011
Vierti®LUTRON® Controls & Accessories
Derating Requirements
Dimmershavefins/sidesectionsthatmust be removed when ganged.Removingthismetalreducesthe
amount of heat that the control can dissipate, thus reducing the wattage capacity of the control (derating).
600 W / VA
1000 W / VA
600 W
6 A
6 A
3 A
500 W / VA
800 W / VA
500 W
5 A
5 A
3 A
400 W / VA
650 W / VA
400 W
3.5 A
3.5 A
3 A
Incandescent/
Magnetic Low Voltage
Electronic Low
Voltage
FluorescentHi-lume
®
Electronic Switch
on Light Load
Electronic Switch
on Fan Load
Both Fins
Remaining
One Fin
Remaining
NoFinsRemaining
(Center)
10
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 11 1.21.2011
Vierti®LUTRON® Controls & Accessories
Architectural Accessories & Wallplates
Description
•Afulllineofaccessoriesandwallplates
•Wallplatesfeaturecleanappearancewithnovisiblescrews
•Wallplatesdesignedforquickandeasymultigangalignment
•1to6-gangwallplatesareavailable
•Engravingisavailable,contactLutronCustomerService
•Selectmattefinishestocoordinatewiththefollowingproducts:
- Vierti
®
-Nova®
-NovaT ®
- Vareo®
-Accessories(Rectptacles&TelephoneJacks)
11
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 12 1.21.2011
Vierti®LUTRON® Controls & Accessories
Receptacles/GFCI Receptacles
Duplex Receptacle 15 A 125 V NTR-15
20 A 125 V NTR-20
Tamper Resistant 15 A 125 V NTR-15-GFTR
GFCI Receptacle 20 A 125 V NTR-20-GFTR
Tamper Resistant 15 A 125 V NTR-15-TR
Duplex Receptacle 20 A 125 V NTR-20-TR
15 A
15 A
20 A
20 A
Telephone Jacks/Cable Jacks
Single Phone Jack
6-Conductor, RJ11 NT-PJ
Single Cable Jack
F-Style, 75-Ohm
coaxial cable
NT-CJ
12
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 13 1.21.2011
Vierti®LUTRON® Controls & Accessories
Telephone Jacks/Cable Jacks
8-Conductor, RJ45
Category 5 phone
jack / F-style,
75-Ohm coaxial
cable jack
NT-PJ8CJ
8-conductor,
RJ45, Category 5
8-conductor,
RJ45, Category 5
Phone/Cable Jack
Double Phone Jack
Triple Phone Jack
NT-PJ8X2
NT-PJ8X3
13
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 14 1.21.2011
Vierti®LUTRON® Controls & Accessories
6-port Frame/Connectors
Phone Jack
Fiber Jack
Cable Jack
- F-style, 75-Ohm
coaxial cable
CON-1C-WHorCON-1C-BL
BNC Jack
- BNC connector
50-Ohm
CON-1B-WH
- 6-conductor, RJ11,
Category 3
- 8-conductor, RJ45,
Category 5e
- 8-conductor, RJ45,
Category 6
CON-1P-C3-WHorCON-1P-C3-BL
CON-1P-C5E-WHorCON-1P-C5E-BL
CON-1P-C6-WHorCON-1P-C6-BL
- MT-RJ feed through
- SC simplex
- LC non-flush mount
- ST style
CON-1F-MTRJ-WH
CON-1F-SC-WH
CON-1F-LC-WH
CON-1F-ST-WH3
6-port Frame Shipped with 6 blanks
NT-6PF
14
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 15 1.21.2011
Vierti®LUTRON® Controls & Accessories
Wiring Diagrams
Neutral
White
Hot
Black
Green Green
Green
NeutralLive
LoadLIve
Load Neutral
Brass
Screws
Nickel
Plated
Screws
Receptacle
(15 A Shown)
Not Protected
Receptacle
(15 A Shown)
Protected
GFCIReceptacle
(15 A Shown)
Protected
120 V
60Hzfeed
GFCI Receptacle Wiring
Neutral
Hot
120 V
60Hzfeed
Brass
Screws
Nickel
Plated
Screws
Receptacle
(15 A Shown)
WhiteBlack
Green Screw
Building Ground
(tometalbox)or
Isolated Ground
Receptacle Wiring
15
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 16 1.21.2011
Vierti®LUTRON® Controls & Accessories
CableJack
75-Ohm
Cable
75-Ohm
Cable
Cable Jack Wiring
6-Conductor
Telephone Jack*
Wire
Color
Jack
Position
1 White
2 Black
3 Red
4 Green
5 Yellow
6 Blue
* accepts most 4-conductor jacks.
Attach colored wires from wall to
correspondingscrewsonbackofphonejack.
Telephone Jack Wiring
Blue
Red
Black
Yellow
Green
White
Wiring Diagrams Continued
8 Conductor Wiring
Match colored wires from wall to
color labels on the connector. Use
the 568A or 568B wiring scheme
basedonpre-existingwiring.
8-Conductor
Telephone Jack*
Wire
Color
Jack
Position
1 Blue
2 Orange
3 Black
4 Red
5 Green
6 Yellow
7 Brown
8 White
* accepts most 4- or 6-conductor jacks.
16
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a171.21.2011
Vierti®LUTRON® Controls & Accessories
Wallplates
VTW-1-
VTW-2-
W:2.94in(75mm)
W: 4.56 in (116 mm)
2-Gang Wallplate
VTW-3-
W: 6.32 in (161 mm)
3-Gang Wallplate
VTW-4-
W: 8.45 in (215 mm)
4-Gang Wallplate
1-Gang Wallplate
H:4.56in(116mm);D:0.30in(7.6mm)
Controlsmusthavefins
brokeninmultiganginstallations.
Derate dimmers and switches
as required.
Elegant screwless
wallplate
Two-partwallplate;
the front securely
snaps on to
adapter plate
Vierti®
5 and 6-Gang Wallplates also available
- Wallplate Color/Finish
17
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-403a 18 1.21.2011
Vierti®LUTRON® Controls & Accessories
Wallplate
Color Suffix
Matte Finish
White WH
Ivory IV
Almond AL
Light Almond LA
Gray GR
Brown BR
Black BL
Beige BE
Taupe TP
Sienna SI
Colors/Finishes
Dimensions
2.75in(73mm)
4.56 in (116 mm)
4.56 in (116 mm)
AddLEDcolorsuffix,thenaddwallboxcolorsuffixtomodelnumber
Example:VT-600M-B-WH
1.147in(29mm)
2.588 in (66 mm)
Including Architectural Style wallplates - Wallplates included
Front Profile
Color Suffix
Metal Finish
Satin Brass SB
Bright Brass BB
Bright Chrome BC
Antique Brass QB
AntiqueBronze QZ
Satin Chrome SC
SatinNickel SN
BrightNickel BN
Anodized Aluminum Finish
ClearAnodized CLA
BlackAnodized BLA
BrassAnodized BRA
Note: Architectural metal finishes are
mountedonblackplasticandinclude
ablackadapterplate.
When ordering metal finish
wallplates for a product color
other than black contact Customer
Service at 1.888.LUTRON1.
LEDs
Color Suffix
Blue B
White W
Green G
All Vierti Dimmers and
Switches feature an Amber
Soft-Glow Locator Light.
18