Fillable Sz Ci Prg(2) (Lutron Electronics, Inc.)

Fill Online, Printable, Fillable, Blank Sz Ci Prg(2) (Lutron Electronics, Inc.) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Sz Ci Prg(2) (Lutron Electronics, Inc.)

On average this form takes 9 minutes to complete

The Sz Ci Prg(2) (Lutron Electronics, Inc.) form is 5 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 35 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
SZ-CI-PRG Programming Control Interface
Description
The Stanza system is an easy-to-install and easy-to-use lighting
control system designed especially for hotel guest rooms and
similar applications. The system consists of wallbox dimmers,
wallbox switches, line-voltage wallbox keypads, low-voltage
interfaces, and lamp socket dimmer/switches. All of these
devices communicate via radio frequency (RF) within each
individual guest room.
The Stanza programming control interface allows setup,
commissioning, and modification of Stanza systems, and can
also be used to integrate with a PC or other digital equipment
that supports TCP/IP over 10/100 BaseT Ethernet or RS232
connections.
Features
•IntegratesaStanza guest room lighting control system with a
PC or other digital equipment that supports RS232 or Ethernet
TCP/IP communication.
•ProvidesabasicserialstringcommandsetthatallowsaPCto
monitor and control lighting.
•EnablesuseofaPCtosetupandcommissionStanza systems.
•AnSZ-CI-PRGisrequiredforcommissioningorsystem
modification. Programmed and commissioned systems do not
requireaSZ-CI-PRGtobepresentforcontinuedoperation.
•Wirelessconnectionallowseasymountingnearintegration
device.
•OneSZ-CI-PRGcontrolinterfacemaybeusedpersystem.
369-347 Rev. A 1 12.14.10
Wireless Control InterfacesSZ-CI-PRG
Stanza®
1
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Standards:
•FCCapproved.ComplieswiththelimitsforaClass
B digital device, pursuant to Part 15 of the FCC
rules
Power:
•Low-voltagePELV(Class2:USA).
•OperatingVoltage:9to24V ,
200 mA maximum.
•ACadapterincluded(requires120V outlet).
Integration:
•Providesone10/100BaseT(autosensing)Auto-
MDIX jack for connecting to an Ethernet network
using TCP/IP.
Note: A managed switch or router is required
when integrating through Ethernet.
•ProvidesoneDB9RS232jackforconnectingtoa
serial device.
•BaudratesupportedoverRS232:9600.
Key Design Features:
•LEDstatusindicatorsprovidedevicediagnostics
•Powerfailurememory:ifpowerisinterrupted,when
the power is restored, device will retain all settings
that were in place prior to the interruption
System Communication and Capacity:
•Programmingcontrolinterfacecommunicateswith
other Stanza system components through radio
frequency (RF) at 434 MHz
•MultipleRFchannelsandthousandsofsystem
addresses prevent interference between systems
•Whenusedonlyforcommissioningand
programming, programming control interface does
not count toward the single-system maximum of 31
Stanza devices
(maximum devices can be increased to 100 if an
SZ-CI-PRGispresentinthesystem)
Specifications
369-347 Rev. A 2 12.14.10
Wireless Control InterfacesSZ-CI-PRG
Stanza®
Environment:
•Ambientoperatingtemperature:32to104°F
(0to40°C)
•Maximum90%non-condensingrelativehumidity
•Indooruseonly
•Cannotbemountedinametalenclosure(interferes
with RF reception).
Warranty:
•1-yearlimitedwarranty
•2-yearfullpartsandlaborwarranty,with8-year
pro-rated parts replacement on commissioned
systems
For details, see www.lutron.com/
TechnicalDocumentLibrary/Warranty_
CommercialSystems.pdf
Color/Finish Codes:
•Blackonly
2
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
2.47
(62.7)
3.75
(95.3)
4.26
(108.2)
5.26
(133.6)
1.06
(26.9)
Mounting holes
Mounting
1. Mount the control interface directly on a surface, as
shown in the Mounting Diagram, using screws (not
included).
2.Whenmounting,providesufficientspaceforthe
antenna and connecting cables. The unit can be
mounted in any orientation.
3. Mount in an accessible location for convenient
access to addressing switches, LEDs, and terminal
blocks.
4. The unit cannot be mounted in a full metal
enclosure. If mounting in a metal enclosure is
necessary, antenna must fully protrude out of
a knockout or other hole. The antenna is not
removable or remotely mountable.
5.ConnectwiringasshownintheWiringDiagram
(next page).
5.26
4.263.75
2.50
1.06
Control Interface
Surface
Mounting Diagram
Dimensions
Dimensions are in in (mm)
6.0
(152.4)
369-347 Rev. A 3 12.14.10
Wireless Control InterfacesSZ-CI-PRG
Stanza®
Terminal
blocks on this
side
LEDs on this side
(Do not use
addressing switch)
0.25
(6.4)
0.34(8.6)
dia.
0.18(4.6)
dia.
0.18(4.6)
dia.
#6or#8(M3orM4)
screw recommended
(not included)
WireStripLength
3/8in
(10 mm)
3
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Wiring Diagram
1 2 3 4 5 6 7
RJ45 jack: Ethernet link
(to PC or A/V equipment)
Note: A managed
switch or router
is required when
integrating through
Ethernet.
Ethernet
link/
activity
Ethernet speed
On = 100 Mbit/sec
Off = 10 Mbit/sec
CAT5 Cable:
maximum 328 ft
(100 m)
To PC or AV equipment. For Ethernet link, use CAT5 cable (not provided) to connect to
auxiliary equipment. The Ethernet link LED will light continuously when link is present
and will flash when there is link activity. Additional Ethernet network equipment and
cables provided by others.
PELV (Class 2: USA) Power in
9 - 24 V 200 mA maximum
(powered by 120 V transformer, included).
RS232 Cable:
maximum 50 ft
(15 m)
COM
TxD
RxD
To PC or AV equipment: Use a 9-pin cable (not
provided), or follow the chart below.
RS232 Pin Connect Wiring
Typical PC or Pin on
RS232 Interface A/V equipment 9-pin cable
Common Com 5
Transmit TxD 3
Receive RxD 2
LED 1: Power
LED 2: Ethernet link
LED 3: RF activity
LED 4: RS232 link TX
LED 5: RS232 link RX
LED 6: Unused
LED 7: Unused
369-347 Rev. A 4 12.14.10
Wireless Control InterfacesSZ-CI-PRG
Stanza®
Diagnostic
LEDs
4
®
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-347 Rev. A 5 12.14.10
Wireless Control Interfaces
SZ-CI-PRG
Stanza®
System Communication Notes
•Stanza lighting controls, keypads, and interfaces must be
located within 30 ft (9 m) of a Stanza device configured
as a repeater. Multiple devices configured as repeaters
may be necessary to provide adequate coverage.
•Atotalof5devicesmaximumcanbeconfiguredas
repeaters.TheSZ-CI-PRGmustbeoneoftherepeaters
when used as an integration device.
•Devicesconfiguredasrepeatersmustbewithin30ft(9
m) of another device configured as a repeater.
•Stanza lighting controls cannot be controlled wirelessly
and Stanza keypads will not function until they are
addressed and programmed.
System Overview
30 ft (9 m)
max. from
repeater
device
30 ft (9 m)
max. from
repeater
device
30 ft
(9 m) max.
Keypad
Dimmer
System Limits
•30ft(9m)fromdevicetorepeaterdevices
•Dimmers,keypads,orcontactclosuredevicescanbe
repeaters
Feature Basic System
(noSZ-CI-PRGpresent)
Advanced System
(withSZ-CI-PRGpresent)
Maximum devices 31 100
RS232 and/or Ethernet
Interface Capability
No Yes
PC Required for Device
Replacement
No Yes
5
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Sz Ci Prg(2) (Lutron Electronics, Inc.)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 18 July 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document