Fillable Sz 6ans(2) (Lutron Electronics, Inc.)

Fill Online, Printable, Fillable, Blank Sz 6ans(2) (Lutron Electronics, Inc.) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Sz 6ans(2) (Lutron Electronics, Inc.)

On average this form takes 11 minutes to complete

The Sz 6ans(2) (Lutron Electronics, Inc.) form is 6 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 42 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-443a 1 04.12.2011
Wireless Lighting Control
Switch
Stanza®
Switch for Permanently Installed Lighting Loads (Incandescent,
Fluorescent, Magnetic Low-Voltage, Electronic Low-Voltage)
and Fan Loads (General-Purpose Fan)
Description
The Stanza
® system is an easy-to-install and easy-to-use lighting
control system designed especially for hotel guest rooms and similar
applications. The system consists of wallbox dimmers, wallbox
switches, line-voltage wallbox keypads, low-voltage interfaces, and
lamp socket dimmer/switches. All of these devices communicate via
radio frequency (RF) within each individual guest room.
Stanza
® switches function much like standard switches, and have
an integral microprocessor, allowing them to be incorporated into
a complete lighting control system. Stanza
® switches are useful in
locations where single circuits of lighting need to be switched.
Stanza
® switches include a front accessible service switch (FASSTM)
for safe bulb replacement.
Features
•Allowslocalswitching(toggleOn/Off)controlofonezoneof
incandescent, fluorescent, magnetic low-voltage, or electronic low-
voltage lighting loads, or general-purpose fan.
•Lightscanalsobetoggled,ifaddressedaspartofaStanza
® lighting
control system, via an RF command from a keypad or integration device.
•3-wayoperationcanbeobtainedusingadimmerandakeypad.
•Screwterminalsandpush-inconnectionssimplifyinstallation.
•Mountsinasingle-gangwallbox.
•LargepaddlebuttondesignedwithADAandUniversalDesign
considerations.
•Faceplatenotincluded;orderseparately.
SZ-6ANS- XX
Shown with SZF-Z5- XX
faceplate
XX = Color code
1
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-443a 2 04.12.2011
Wireless Lighting Control
Switch
Stanza®
Specifications
Regulatory Approvals:
•UL
•NOM
•cULandICA
•FCC(ComplieswiththelimitsforaClassBdigital
device, pursuant to Part 15 of the FCC rules)
Load:
•10Wminimum,6Amaximumhalogen,
fluorescent, incandescent, magnetic low-voltage,
electronic low-voltage, or high-intensity discharge
loads
•Deratedifganged;seederatingtable
•3Ageneral-purposefan
•Singlelocationonly
•Donotinstallswitchtocontrolstandard
receptacles. Contact Lutron for switchable
receptacle solution.
Power:
•Operatingvoltage:120V
50/60 Hz
•Requiresaneutralwireconnection
Key Design Features:
•Indicatorlightglowsgreen;turnsamberfor
programming indication
•Powerfailurememory:ifpowerisinterrupted,
when the power is restored, lights will return to
their previous state prior to the interruption
•RequiresStanza
®-specific faceplate (order
separately)
•Requiresa1-gangU.S.wallbox:3.5in(89mm)
deeprecommended;2.25in(57mm)deep
minimum
•CanbegangedwithotherStanza® controls or
with decorator controls using multigang Stanza®
faceplates
(Deratedifganged;seederatingtable)
System Communication and Capacity:
•SwitchescommunicatewithotherStanza
® system
components through radio frequency (RF) at
434 MHz
•MultipleRFchannelsandthousandsofsystem
addresses prevent interference between systems
•Eachswitchcountsas1towardthebasicsystem
maximum of 31 RF devices (maximum RF devices
can be increased to 100 if an SZ-CI-PRG is present
in the system)
Environment:
•Ambientoperatingtemperature:
32 - 104 °F (0 - 40 °C)
•Maximum90%non-condensingrelativehumidity
•Indooruseonly
Warranty:
•1-yearlimitedwarrantystandard.2-yearparts
andlaborwarranty,with8-yearpro-ratedparts
replacement on systems that include factory startup.
Formoreinformation:
www.lutron.com/TechnicalDocumentLibrary/
Warranty_CommercialSystems.pdf
Color Codes:
(Satin Colors
®)
Button Color Code
Biscuit BI
Eggshell ES
Merlot MR
Midnight MN
Sienna SI
Snow SW
Taupe TP
Contact Lutron for other available finish options.
2
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-443a 3 04.12.2011
Wireless Lighting Control
Switch
Stanza®
Mounting
Dimensions
Switch
Faceplate
adapter
Switch
mounting
screws
Faceplate
Faceplate
adapter
mounting
screws
Locating post
Locating hole
Locating post
Locating hole
Ensure your customer will be
happy by installing this product
correctly so the switch protrudes
from the faceplate.
•Ensurealldevicesarecorrectlywiredandloosely
fastentothewallboxbeforeinstallingorreplacing
faceplates.
•Forinstallationwitharecessedwallbox,usespacer
shims(LutronPN257117)forpropersupportof
control(s).
•Formultiganginstallation,verifythattheorderof
controls in the wallbox corresponds to the faceplate
openings.
•Ensurecontrolsandsurroundingwallarefreefrom
debris (e.g. plaster, spackling compound) before
installing adapter and faceplate.
STOP
•AttachLutronStanza® faceplateadapterand
faceplate.
a. Align the locating posts on the control(s) to the
holes in the adapter.
b. Install the adapter onto front of control(s) using
the short screws provided. The faceplate adapter
should be firmly against the control.
c. Tighten control mounting screws until faceplate
adapter is flush to wall (do not over-tighten).
d. Snap faceplate onto faceplate adapter, and verify
that control is aligned properly and switch(es)
protrude(s) in front of the faceplate.
e. If control(s) is (are) misaligned or switch(es) is (are)
flush with the faceplate, loosen control mounting
screws appropriately.
3
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-443a 4 04.12.2011
Wireless Lighting Control
Switch
Stanza®
369-443a 4 04.12.2011
Wireless Lighting Control
Switch
Stanza®
Dimensions
4.69 in
(119 mm)
3.06 in
(77mm)
1.12 in
(35 mm)
.29 in
(7.5mm)
2.6 in
(66 mm)
1.8in
(46 mm)
0.2 in
(5.1 mm)
Radius x4
Faceplate
not shown
in rear view
4
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-443a 5 04.12.2011
Wireless Lighting Control
Switch
Stanza®
Switch Operation
Important Notice
To replace bulb, power may be conveniently
removed by pulling the FASSTM down on the
switch. For any procedure other than routine bulb
replacement, power must be disconnected at the
main electrical panel.
Ganging and Derating
Lutron Stanza® faceplates are available in 1-gang
through6-gangversions.Whencombiningcontrols
in a wallbox, derating is required as indicated below.
Note:Controlsdonothavefinsthatneedtobe
removed for multigang installations.
Indicator Light
•Glowssoftlygreenforeasylocatingofcontrol
•Endsflashambertoindicateprogramming/addressingmode
Tapswitch
•TurnsloadOn/Off
FASS
TM
•Front-AccessibleServiceSwitch(facilitatessafebulbreplacement)
•Pulldowntoremoveallelectricalpowerfromloadanddeactivateswitch
•Pushuptorestorepowertoloadanddimmer
End of gang
Middle of gang
Derated Loads for SZ-6ANS
Maximum Rating
Position Lighting Load Motor Load
Single (no ganging) 6 A 3 A
End of Gang 5 A 3 A
Middle of Gang 3.5 A 3 A
5
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-443a 6 04.12.2011
Wireless Lighting Control
Switch
Stanza®
Wiring Diagram
Single Location Installation Only
System Overview
System Communication Notes
•Stanza
® RF devices must be located within
30 feet (9 m) of a Stanza
® RF device configured
as a repeater. Multiple devices configured as
repeaters may be necessary to provide adequate
coverage.
•AnyStanza
® RF device can be configured as a
repeater.
•Atotalof5devicesmaximumcanbeconfigured
as repeaters.
•Devicesconfiguredasrepeatersmustbewithin
30 feet (9 m) of another device configured as a
repeater.
•Stanza® lighting controls cannot be controlled
wirelessly and Stanza
® keypads will not function
until they are addressed and programmed.
Dimmer
Keypad
30 ft (9 m) max.
from repeater device
30 ft (9 m) max.
from repeater device
30 ft
(9 m)
max.
Dimmer
Hot
Neutral
Ground
Green
Light
fixture
120V
50 / 60 Hz
Brass
Silver
Black
Feature Basic System
(no SZ-CI-PRG present)
Advanced System
(with SZ-CI-PRG present)
Maximum devices 31 100
RS232 and/or Ethernet
Interface Capability
No Yes
PCRequiredforDevice
Replacement
No Yes
6
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Sz 6ans(2) (Lutron Electronics, Inc.)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 18 July 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document