Job Name:
Job Number:
Page
SPECIFICATION SUBMITTAL
lcp/xps-2 01.09.08
Submittal Package
Lighting Control System
System Solutions
• Unless otherwise noted, a rough calibration will be performed at system start-up. Final calibration is
the responsibility of the end user since it is very dependent on furniture placement, HVAC operation,
and space usage.
• Photocell
• Verification of proper installation and operation.
• Unless otherwise noted a rough calibration will be performed at system start-up. Final calibration is
the responsibility of the end user since it is very dependent on furniture placement, window
treatments, outside weather conditions and space usage.
• Time clock set up
• Lutron will set up the system location, daylight savings, and time of day preparation for event
programming.
• Lutron will set up time clock events as per the approved submittal drawings or written instructions
from end user or end users representative, contractor in that order of priority.
• In lieu of instructions, the time clock will not be programmed.
Items not included in standard on-site startup:
• Lutron service technicians will not perform work on non-Lutron equipment. Lutron will work with other
manufacturers on integration of equipment by others.
• Programming or any other changes that are requested to be performed counter to the approved submittal
drawings must be approved in writing via the proper channels.
• Field wiring changes or corrections that delay the startup process such that additional time is required for
Lutron to complete the startup will result in additional charges.
• Replacement of controls damaged due to miss-wires or incorrect installation or any other related issue not
covered under the Lutron warranty is the responsibility of the installer.
• Reprogramming of any functions after initial programming and sign-off.
End user training on overall system operation. Typical training agenda listed below:
• This system is not typically sold with a separate visit for the training of the end user. Check with purchasing
agent if this is required.
• It is the responsibility of the person scheduling the startup to ensure the appropriate end users are present for
system training. Lutron typically does not have these contacts.
• Additional charges will apply if a separate visit is required for training the end user.
• Video media is not provided by Lutron for training sessions. This may be provided by “others” for turnover to
the end user or job site documentation.
• System demonstration and sign-off by the end user.
Additional items that are not included with standard startup, but may be purchased – check your
quote to verify an item has been included with your quote. The quantity of the items listed below on
the BOM will determine how many days are included with this item.
• LSC-AF-VISIT. Aim and focus visit with design team or end user. This visit is typically coordinated by
the construction team, that includes designers, Lutron, and end user to set up light levels and adjust
fixtures.
• LSC-SYSOPT. System optimization visit with end user. This visit is coordinated by the EC or end user
to optimize the system performance to specific project details.
Toll Free 24/7 Tech Support Line 1.800.523.9466
Field Service Scheduling 1.800.523.9466 ext. 4439
