R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sz-6d 1 07.09.09
Wireless Lighting Control
Slider Dimmer
StanzaTM
Halogen, Incandescent, and Magnetic Low-Voltage Dimmer
Description
The Stanza system is an easy-to-install and easy-to-use lighting
control system designed especially for hotel guest rooms and similar
applications. The system consists of wallbox dimmers, wallbox
switches, line-voltage wallbox keypads, low-voltage interfaces, and
lamp socket dimmer/switches. All of these devices communicate via
radio frequency (RF) within each individual guest room.
Stanza dimmers function much like standard dimmers and
switches, and have an integral microprocessor, allowing them to be
incorporated into a complete lighting control system. Stanza dimmers
are useful in locations where single circuits of lighting need to be
dimmed and switched. Stanza dimmers include a front accessible
service switch (FASSTM) for safe bulb replacement.
Features
Allows local dimming and switching (toggle On/Off) control of one
zone of halogen, incandescent, or magnetic low-voltage loads.
Light level can also be adjusted, if addressed as part of a Stanza
lighting control system, via an RF command from a keypad or
integration device.
3-way operation can be obtained using a dimmer and a keypad.
Screw terminals and push-in connections simplify installation.
Shallow back cover takes up less room in the wallbox.
Large controls designed with ADA and Universal Design
considerations.
Two wire (plus ground) installation allows easy replacement of
existing switches.
Faceplate not included; order separately.
SZ-6D-XX
Shown with SZF-Z5-XX
faceplate
XX = Color code
1
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sz-6d 2 07.09.09
Wireless Lighting Control
Slider Dimmer
StanzaTM
Specifications
Standards:
UL listed
NOM approved
CUL approved and ICA registered
FCC approved. Complies with the limits for a
Class B digital device, pursuant to Part 15 of the
FCC rules
Load:
40 W minimum, 600 W maximum halogen,
incandescent, or 450 W / 600 VA magnetic
low-voltage
Derated if ganged; see derating chart
Do not install dimmer to control standard
receptacles or motor-operated appliances.
Contact Lutron for dimmable receptacle solution.
Power:
Operating voltage: 120 V 50/60 Hz
Key Design Features:
Backlight of slider glows green; section of slider
track turns amber for programming indication
Adjustable maximum light level provides energy
savings and extended bulb life
Power failure memory: if power is interrupted,
when the power is restored, lights will return to
their previously set level prior to the interruption
On a single tap, lights alternately fade to preset
level or turn off
Light level can be fine-tuned by moving the slider
up or down until the desired light level is reached
Requires Stanza-specific faceplate (order
separately)
Requires a 1-gang U.S. wallbox: 3.5 in (89 mm)
deep recommended; 2.25 in (57 mm) deep
minimum
Can be ganged with other Stanza controls or
with decorator controls using multigang Stanza
faceplates
System Communication and Capacity:
Dimmers communicate with other Stanza system
components through radio frequency (RF) at 434
MHz
Multiple RF channels and thousands of system
addresses prevent interference between systems
Each dimmer counts as 1 toward the basic
system maximum of 31 RF devices
(maximum devices can be increased to 100 if an
SZ-CI-PRG is present in the system)
Environment:
Ambient operating temperature:
32 - 104 °F (0 - 40 °C)
Maximum 90% non-condensing relative humidity
Indoor use only
Warranty:
1-year limited warranty
2-year full parts and labor warranty, with 8-year
pro-rated parts replacement on commissioned
systems
Color Codes:
(Satin ColorsTM)
Button Color Code
Biscuit BI
Eggshell ES
Merlot MR
Midnight MN
Sienna SI
Snow SW
Taupe TP
Contact Lutron for other available finish options.
2
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sz-6d 3 07.09.09
Wireless Lighting Control
Slider Dimmer
StanzaTM
Mounting
Dimensions
Dimmer
Faceplate
adapter
Dimmer
mounting
screws
Faceplate
Faceplate
adapter
mounting
screws
Locating post
Locating hole
Locating post
Locating hole
Ensure your customer will be
happy by installing this product
correctly so the switch protrudes
from the faceplate.
Ensure all devices are correctly wired and loosely
fasten to the wallbox before installing or replacing
faceplates.
For installation with a recessed wallbox, use spacer
shims (Lutron PN 257117) for proper support of
control(s).
For multigang installation, verify that the order of
controls in the wallbox corresponds to the faceplate
openings.
Ensure controls and surrounding wall are free from
debris (e.g. plaster, spackling compound) before
installing adapter and faceplate.
Attach Lutron Stanza faceplate adapter and
faceplate.
a. Align the locating posts on the control(s) to the
holes in the adapter.
b. Install the adapter onto front of control(s) using
the short screws provided. The faceplate adapter
should be firmly against the control.
c. Tighten control mounting screws until faceplate
adapter is flush to wall (do not over-tighten).
d. Snap faceplate onto faceplate adapter, and verify
that control is aligned properly and switch(es)
protrude(s) in front of the faceplate.
e. If control(s) is (are) misaligned or switch(es) is (are)
flush with the faceplate, loosen control mounting
screws appropriately.
3
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sz-6d 4 07.09.09
Wireless Lighting Control
Slider Dimmer
StanzaTM
sz-6d 4 07.09.09
Wireless Lighting Control
Slider Dimmer
StanzaTM
Dimensions
4-11/16 in
(119 mm)
3-1/16 in
(77 mm)
1-1/8 in
(35 mm)
.29 in
(7.5 mm)
4
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sz-6d 5 07.09.09
Wireless Lighting Control
Slider Dimmer
StanzaTM
Dimmer Operation
Important Notice
To replace bulb, power may be conveniently
removed by pulling the FASS down on the
dimmer. For any procedure other than routine bulb
replacement, power must be disconnected at the
main electrical panel.
Ganging and Derating
Lutron Stanza faceplates are available in single-
gang and multiple-gang versions. When combining
controls in a wallbox, derating is required as
indicated below.
End of gang
Middle of gang
Derated Loads for SZ-6D
Position Maximum Rating
Single (no ganging) 600 W Incandescent,
450 W / 600 VA MLV
End of Gang 500 W Incandescent,
400 W / 500 VA MLV
Middle of Gang 400 W Incandescent,
300 W / 400 VA MLV
Indicator Light in Slider Track
Glows softly green for easy locating of control
Track ends flash amber to indicate programming/addressing mode
Dimming Slider
Slide up to brighten
Slide down to dim
Load must be on for slider to affect intensity
Tapswitch
Turns load on/off
FASSTM
Front-Accessible Service Switch (facilitates safe bulb replacement)
Pull down to remove all electrical power from load and deactivate switch
Push up to restore power to load and dimmer
5
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sz-6d 6 07.09.09
Wireless Lighting Control
Slider Dimmer
StanzaTM
Wiring Diagram
Single Location Installation Only
Hot
120 V
50/60 Hz
Light
Fixture(s)
Dimmer
Neutral
Brass
Black
Ground
Green
System Communication Notes
Stanza RF devices must be located within
30 feet (9 m) of a Stanza RF device configured
as a repeater. Multiple devices configured as
repeaters may be necessary to provide adequate
coverage.
Any Stanza RF device can be configured as a
repeater.
A total of 5 devices maximum can be configured
as repeaters.
Devices configured as repeaters must be within
30 feet (9 m) of another device configured as a
repeater.
Stanza lighting controls cannot be controlled
wirelessly and Stanza keypads will not function
until they are addressed and programmed.
System Overview
Dimmer
Keypad
30 ft (9 m) max. from
repeater device
30 ft (9 m) max. from
repeater device
30 ft
(9 m) max.
Feature Basic System
(no SZ-CI-PRG present)
Advanced System
(with SZ-CI-PRG present)
Maximum devices 31 100
RS232 and/or Ethernet
Interface Capability
No Yes
PC Required for Device
Replacement
No Yes
6