Fillable SZ CS CCO (Lutron Electronics, Inc.)

Fill Online, Printable, Fillable, Blank SZ CS CCO (Lutron Electronics, Inc.) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

SZ CS CCO (Lutron Electronics, Inc.)

On average this form takes 9 minutes to complete

The SZ CS CCO (Lutron Electronics, Inc.) form is 5 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 35 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-300 Rev. B 1 03.24.11
Lighting Control Accessory
Card Switch
Stanza®
Card Switch Guest Room Control
Description
In a Stanza® system, the card switch guest room control allows hotel
guests to activate a welcome lighting scene by inserting their room
key into the slot upon entering the room. When guests leave the
room, they remove the card to turn the lights off or activate another
“away” state. Controls that are a part of this away state can be
locked out from local operation until the card is reinserted.
Features
•Providesonemaintainedcontactclosureoutputwhencardis
inserted.
•Greenbacklightstripatcardslotflasheswhencardisnotpresent.
•Mountsinasingle-gangwallbox.
•Maybemountedwithcardslottotheleftortheright.
•Faceplatenotincluded;orderseparately.
SZ-CS-CCO-XX
Shown with SZF-Z5-XX
faceplate
XX = Color code
1
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-300 Rev. B 2 03.24.11
Lighting Control Accessory
Card Switch
Stanza®
Specifications
Power:
•Operatingvoltage:12-24V or12-24V ;
maximum100mA
•IECPELV/NEC® Class 2 Power required for
proper operation
Key Design Features:
•Indicatorlightincardslotflashesgreenwhencard
is not present
•Acceptsstandardsizecardkeys:2.125x3.375x
0.03in(54x86x0.8mm)(wxhxd)
•RequiresStanza®-specific faceplate (order
separately)
•Requiresa1-gangU.S.wallbox:3.5in(89mm)
deeprecommended;2.25in(57mm)deep
minimum
•Contactclosuretype:Supports“activelow”or
“active high” contact closure inputs. See Wiring
Diagrams for more information
•CanbegangedwithotherStanza controls or
with decorator controls using multigang Stanza
faceplates
System Communication:
•DirectlycompatiblewithSZ-IO,QSE-IO,GRX-IO,
and OMX-IO interfaces
•CardswitchescommunicatewithotherStanza
system components through SZ-IO contact
closure interface
•Canbetiedtoothersystemsthataccepta
contact closure input. See Wiring Diagrams for
more information.
Contact Closure Output:
•Contactclosureoutputsupports40V when
open, 50 mA when closed
-Opencircuitvoltage:40V maximum
- Card switch draws < 1 µA open circuit
-On-statevoltageis1V atmaximumof50mA
-CCOPowerdissipationnottoexceed100mW
Standards:
•CertifiedforIEC/ENcompliance
•CE
Environment:
•Ambientoperatingtemperature:
32-104°F(0-40°C)
•Maximum90%non-condensingrelativehumidity
•Indooruseonly
Warranty:
•1-yearlimitedwarranty
•2-yearfullpartsandlaborwarranty,with8-year
pro-rated parts replacement on commissioned
systems
Color Codes:
(Satin ColorsTM)
Insert Color Code
Biscuit BI
Eggshell ES
Merlot MR
Midnight MN
Sienna SI
Snow SW
Taupe TP
Contact Lutron for other available finish options.
2
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-300 Rev. B 3 03.24.11
Lighting Control Accessory
Card Switch
Stanza®
Mounting
Faceplate
adapter
Card switch
mounting
screws
Faceplate
Faceplate
adapter
mounting
screws
Card switch
Wallbox
Ensure your customer will be
happy by installing this product
correctly so the card switch
protrudes from the faceplate.
•Ensurealldevicesarecorrectlywiredandloosely
fastentothewallboxbeforeinstallingorreplacing
faceplates.
•Forinstallationwitharecessedwallbox,usespacer
shims(LutronPN257117)forpropersupportof
control(s).
•Formultiganginstallation,verifythattheorderof
controlsinthewallboxcorrespondstothefaceplate
openings.
•Ensurecontrolsandsurroundingwallarefreefrom
debris(e.g.plaster,spacklingcompound)before
installing adapter and faceplate.
•AttachLutronStanza® faceplateadapterand
faceplate.
a.Installtheadapterontofrontofcontrol(s)using
the short screws provided. The faceplate adapter
should be firmly against the control.
b. Tighten control mounting screws until faceplate
adapterisflushtowall(donotover-tighten).
c. Snap faceplate onto faceplate adapter, and verify
thatcontrolisalignedproperlyandswitch(es)
protrude(s)infrontofthefaceplate.
d.Ifcontrol(s)is(are)misalignedorswitch(es)is(are)
flush with the faceplate, loosen control mounting
screws appropriately.
3
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-300 Rev. B 4 03.24.11
Lighting Control Accessory
Card Switch
Stanza®
Dimensions
4$ in
(119mm)
37 in
(77mm)
1.95 in
(50mm)
0.29 in
(7.5mm)
Switch Operation
Indicator Light in Card Slot
Flashes when card is not present
Engraving
Arrow icon is provided standard
4
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-300 Rev. B 5 03.24.11
Lighting Control Accessory
Card Switch
Stanza®
Stanza card switch
(rearview)
Stanza card switch
(rearview)
Stanza card switch
(rearview)
Contact closure
interface
SZ-IO shown
Alsocompatiblewith:
QSE-IO,GRX-IO,
OMX-IO
Common
}
Available CCIs
PWR
COM
2 1
Wiring Example 1: Operation with a Stanza® System
Card switch to Lutron Contact Closure Interface
Wiring Example 2: Operation with an “active low” CCI device
(e.g.,PP-20)
Wiring Example 3: Operation with an “active high” CCI device
(e.g.,PP-120H)
Note:Wiringofthisterminal
varies for other systems.
Switchpack
with “active
low” signal
Switchpack
with “active
high” signal
Note: Confirm compatibility of contact closure input of
switchpack with CCO of SZ-CS-CCO
-Opencurrentvoltage:40V maximum
- Card switch draws < 1 µA open circuit
-On-statevoltageis1V atmaximumof50mA
-CCOPowerdissipationnottoexceed100mW
Note: Confirm compatibility of contact closure input of
switchpack with CCO of SZ-CS-CCO
-Opencurrentvoltage:40V maximum
- Card switch draws < 1 µA open circuit
-On-statevoltageis1V atmaximumof50mA
-CCOPowerdissipationnottoexceed100mW
Terminals
4:CCOCOM/SIG
3:SIG/CCOPWR
2:V+
1:COM
Terminal Wiring
Contactclosureterminals3and4:
28to16AWG(0.08to1.5mm
2
)
Powerterminals1and2:
18to16AWG(1.0to1.5mm
2
)
Maximumwirelength250ft(76m)
Terminals
4:CCOCOM/SIG
3:SIG/CCOPWR
2:V+
1:COM
Terminals
4:CCOCOM/SIG
3:SIG/CCOPWR
2:V+
1:COM
SIG
PWR
COM
SIG
PWR
COM
Note: If
connected
device is
always in
the on-state,
confirm
wiring of
terminals 3
and 4.
5
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

SZ CS CCO (Lutron Electronics, Inc.)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 18 July 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document