Fillable QSWS2 seeTouch QS Wallstation Specification Submittal (369489)

Fill Online, Printable, Fillable, Blank QSWS2 seeTouch QS Wallstation Specification Submittal (369489) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

QSWS2 seeTouch QS Wallstation Specification Submittal (369489)

On average this form takes 47 minutes to complete

The QSWS2 seeTouch QS Wallstation Specification Submittal (369489) form is 39 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 189 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 1 09.24.19
Lutron seeTouch QS
QSWS2-1BN-___-___
QSWS2-1BI-___-___
1-Button Wallstation
Description
• Offers toggle functionality for any combination of
zone(s) in the system.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to
find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
QSWS2-1BN-WH
(Non-insert version)
LED
QSWS2-1BI-WH
(Insert version)
Color and Engraving Codes
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 2 09.24.19
Lutron seeTouch QS
QSWS2-2BN-___-___
QSWS2-2BI-___-___
2-Button Wallstation
Description
• Often used in entryways to select Scene 1
and Off.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the wallstation in low-light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
Engraving
1
Off
QSWS2-2BN-WH-EGN
(Non-insert version)
QSWS2-2BI-WH
(Insert version)
LEDs
Color and Engraving Codes (continued)
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 3 09.24.19
Lutron seeTouch QS
QSWS2-3BN-___-___
QSWS2-3BI-___-___
3-Button Wallstation
Description
• Often used to select scenes.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the wallstation in low-light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
Engraving
1
2
3
QSWS2-3BN-WH-EGN
(Non-insert version)
QSWS2-3BI-WH
(Insert version)
LEDs
Color and Engraving Codes (continued)
3
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 4 09.24.19
Lutron seeTouch QS
QSWS2-5BN-___-___
QSWS2-5BI-___-___
5-Button Wallstation
Description
• Often used to select between 4 scenes and Off.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the wallstation in low-light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
Engraving
1
2
3
4
Off
QSWS2-5BN-WH
(Non-insert version)
QSWS2-5BI-WH-EGN
(Insert version)
LEDs
Color and Engraving Codes (continued)
4
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 5 09.24.19
Lutron seeTouch QS
QSWS2-7BN-___-___
QSWS2-7BI-___-___
7-Button Wallstation
Description
• Often used to select scenes.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the wallstation in low-light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
Engraving
1
2
3
4
5
6
7
QSWS2-7BN-WH-EGN
(Non-insert version)
QSWS2-7BI-WH
(Insert version)
LEDs
Color and Engraving Codes (continued)
5
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 6 09.24.19
Lutron seeTouch QS
QSWS2-2BRLN-___-___
QSWS2-2BRLI-___-___
2-Button Wallstation with Raise / Lower
Description
• Often used to select and adjust scenes.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the wallstation in low-light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• Master Raise / Lower brightens or dims all lighting or
raises / lowers all assigned shades in the last selected
scene or toggled group.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Shade control features (E01 engraving):
– Can control Sivoia QS window treatments.
– Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
Master Raise / Lower
Engraving
Scene
Selection
Buttons
1
Open
Close
Off
QSWS2-2BRLN-WH-EGN
(Non-insert version)
LED
QSWS2-2BRLI-WH-E01
(Insert version)
Color and Engraving Codes (continued)
6
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 7 09.24.19
Lutron seeTouch QS
QSWS2-3BRLN-___-___
QSWS2-3BRLI-___-___
3-Button Wallstation with Raise / Lower
Description
• Often used to select and adjust scenes.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to
find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• Master Raise / Lower brightens or dims all lighting or
raises / lowers all assigned shades in the last selected
scene or toggled group.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Shade control features (E01 engraving):
– Can control Sivoia QS window treatments.
– Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
– One (1) programmable preset button.
Engraving
Open
Preset
Close
1
2
3
Master Raise / Lower
QSWS2-3BRLN-WH-E01
(Non-insert version)
LED
QSWS2-3BRLI-WH-EGN
(Insert version)
Color and Engraving Codes (continued)
7
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 8 09.24.19
Lutron seeTouch QS
QSWS2-5BRLN-___-___
QSWS2-5BRLI-___-___
5-Button Wallstation with Raise / Lower
Description
• Often used to select and adjust scenes.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the wallstation in low-light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• Master Raise / Lower brightens or dims all lighting or
raises / lowers all assigned shades in the last selected
scene or toggled group.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Shade control features (E01 engraving):
– Can control Sivoia QS Window Treatments.
– Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
– Three (3) programmable preset buttons.
Master Raise / Lower
Engraving
Scene
Selection
Buttons
1
2
3
4
Off
Open
Preset 1
Preset 2
Preset 3
Close
QSWS2-5BRLN-WH-EGN
(Non-insert version)
LED
QSWS2-5BRLI-WH-E01
(Insert version)
Color and Engraving Codes (continued)
8
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 9 09.24.19
Lutron seeTouch QS
QSWS2-2BRLIRN-___-___
QSWS2-2BRLIRI-___-___
2-Button Wallstation with
Infrared (IR) Receiver and Raise / Lower
Description
• Often used to select and adjust scenes.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the wallstation in low-light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• Master Raise / Lower brightens or dims all lighting or
raises / lowers all assigned shades in the last selected
scene or toggled group.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Shade control features (E01 engraving):
– Can control Sivoia QS window treatments.
– Also controls shades with wireless IR controllers
SVQ-3PIT, SVQ-OCIT, SVQ-4GD-OCIT,
and SVQ-4S2G-IT.
– Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
Master Raise / Lower
Engraving
Scene
Selection
Buttons
IR Window
1
Off
QSWS2-2BRLIRN-WH-EGN
(Non-insert version)
LED
QSWS2-2BRLIRI-WH
(Insert version)
Color and Engraving Codes (continued)
9
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 10 09.24.19
Lutron seeTouch QS
QSWS2-3BRLIRN-___-___
QSWS2-3BRLIRI-___-___
3-Button Wallstation with
Infrared Receiver and Raise / Lower
Description
• Often used to select and adjust scenes.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the wallstation in low-light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• Master Raise / Lower brightens or dims all lighting or
raises / lowers all assigned shades in the last selected
scene or toggled group.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Shade control features E01 engraving):
– Can control Sivoia QS window treatments.
– Also controls shades with wireless IR controllers
SVQ-3PIT, SVQ-OCIT, SVQ-4GD-OCIT, and
SVQ-4S2G-IT.
– Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
– One (1) programmable preset button.
Engraving
1
2
3
Open
Preset
Close
Master Raise / Lower
IR Window
QSWS2-3BRLIRN-WH-EGN
(Non-insert version)
LED
QSWS2-3BRLIRI-WH-E01
(Insert version)
Color and Engraving Codes (continued)
10
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 11 09.24.19
Lutron seeTouch QS
QSWS2-5BRLIRN-___-___
QSWS2-5BRLIRI-___-___
5-Button Wallstation with
Infrared Receiver and Raise / Lower
Description
• Often used to select and adjust scenes.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the wallstation in low-light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• Master Raise / Lower brightens or dims all lighting or
raises / lowers all assigned shades in the last selected
scene or toggled group.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Shade control features (E01 engraving):
– Can control Sivoia QS window treatments.
– Also controls shades with wireless IR controllers
SVQ-3PIT, SVQ-OCIT, SVQ-4GD-OCIT, and
SVQ-4S2G-IT.
– Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
– Three (3) programmable preset buttons.
Master Raise / Lower
IR Window
Scene
Selection
Buttons
1
2
3
4
Off
Engraving
QSWS2-5BRLIRN-WH-EGN
(Non-insert version)
LED
QSWS2-5BRLIRI-WH
(Insert version)
Color and Engraving Codes (continued)
11
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 12 09.24.19
Lutron seeTouch QS
QSWS2-1RLDN-___-___
QSWS2-1RLDI-___-___
Dual Wallstation with 3-Button
and 2-Button with Raise / Lower
Description
• Used to control one or more lighting or window
treatment groups simultaneously.
• Functions as two independently programmable
controllers: a 3-button (top keypad group) and a
2-button (bottom keypad group). Can control two
lighting zones, two shade zones, or one of each.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with on-button engraving make it
easy to find and operate the wallstation in low-light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Shade control features (E01 engraving):
– Used to control multiple groups of shades
independently from a single-gang keypad (e.g., a
window with a sheer shade and a blackout shade).
– Often used to select three different groups of shades
using Open, Close, and Raise / Lower.
– Can control Sivoia QS window treatments.
– Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
Engraving
Group 1
Group 2
Group 3
1
2
3
Open
Close
Open
Close
Raise / Lower
QSWS2-1RLDN-WH-E01
(Non-insert version)
LED
QSWS2-1RLDI-WH-EGN
(Insert version)
Color and Engraving Codes (continued)
12
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 13 09.24.19
Lutron seeTouch QS
QSWS2-2RLDN-___-___
QSWS2-2RLDI-___-___
Dual 2-Button Wallstation with Raise / Lower
Description
• Used to control one or more lighting or window
treatment groups simultaneously.
• Functions as two independently programmable
2-button controllers. Can control two lighting zones,
two shade zones, or one of each.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with on-button engraving make it
easy to find and operate the wallstation in low-light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Shade control features (E01 engraving):
– Can be used to control multiple groups of shades
independently from a single-gang keypad (e.g., a
window with a sheer shade and a blackout shade).
– Can control Sivoia QS window treatments.
– Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
Engraving
Open
Close
1
2
Open
Close
Open
Close
Raise / Lower
Raise / Lower
QSWS2-2RLDN-WH-E01
(Non-insert version)
LED
QSWS2-2RLDI-WH-EGN
(Insert version)
Color and Engraving Codes (continued)
13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 14 09.24.19
Lutron seeTouch QS
QSWS2-3BDI-___-___
QSWS2-3BDN-___-___
Dual 3-Button Wallstation
Description
• Used to control one or more lighting or window
treatment groups simultaneously.
• Functions as two independently programmable
3-button controllers. Can control two lighting zones,
two shade zones, or one of each.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with on-button engraving make it
easy to find and operate the wallstation in low-light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Shade control features (E01 engraving):
– Can be used to control multiple groups of shades
independently from a single-gang keypad (e.g., a
window with a sheer shade and a blackout shade).
– Can control Sivoia QS window treatments.
– Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
– One (1) programmable preset button per 3-button
column.
Engraving
1
2
3
Open
Preset
Close
Open
Preset
Close
Open
Preset
Close
QSWS2-3BDN-WH-EGN
(Non-insert version)
LED
QSWS2-3BDI-WH-E01
(Insert version)
Color and Engraving Codes (continued)
14
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 15 09.24.19
Lutron seeTouch QS
Specifications
Power Input (Control Link Terminal 2)
SELV / PELV / NEC
® Class 2. Operating voltage: 24–36 V- 30 mA
Key Design Features
• Field-changeable button and faceplate assemblies allow easy
customization.
• Meets IEC 801-2. Tested to withstand 15 kV electrostatic discharge
without damage or memory loss.
• Faceplate snaps on with no visible means of attachment.
• Available as an “insert” style control for multiganging.
• Can be ganged to share a common faceplate with Nova T* and Vareo
dimmers. To order new wallplates for multi-ganging, specify “R3” openings
in a Nova T* multi-gang FB (fins broken) Series model number.
• Use Faceplate Replacement Kits to change color, button configuration, or
engraving, or to convert between non-insert and insert configurations.
System Communications and Capacity
• SELV / PELV / NEC
® Class 2 wiring connects wallstations to other devices on
the QS Link.
• A QS system can have up to 100 devices and 100 zones; seeTouch QS
wallstations each count as 1 device and 0 zones on the QS Link.
• A seeTouch QS wallstation consumes 1 power draw unit (PDU) on the
QS link. For complete information, see Power Draw Units on the QS Link
(P/N 369405) at www.lutron.com
Terminals
Accept up to two 18 AWG (1.0 mm
2
).
Environment
32 °F to 104 °F (0 °C to 40 °C). Relative humidity less than 90%
non-condensing.
Compatibility
seeTouch QS keypads are compatible with GRAFIK Eye QS, Sivoia QS,
Energi Savr Node, and Quantum systems.
Mounting
Typical backbox
dimensions:
3.75 in (95 mm) high,
2.1875 in (55 mm) wide,
2.75 in (70 mm) deep.
4
3
2
1
C
B
A
Dimensions
Front View
Side View
Back View
QS Link
Connector
17 in
(27 mm)
22 in
(70 mm)
9 in
(8 mm)
2 in
(19 mm)
Sensor /
Contact
Closure
Input
Connector
4# in
(116 m m)
15
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 16 09.24.19
Lutron seeTouch QS
Available Control Types
seeTouch wallstations are available in three types:
Lights Only
Lights and Shades Shades Only
1
2
3
QSWS2-3BRLI-WH-EGN
(Insert version)
1
2
3
Open
Close
QSWS2-1RLDI-WH-EGN
(Insert version)
Open
Preset 1
Preset 2
Preset 3
Close
QSWS2-5BRLI-WH-E01
(Insert version)
Lights Only
• Controls only lights.
• Has a programmable column type (choose from the list on the following pages).
• Engraving options: General (EGN) and Non-Standard (NST).
Lights and Shades
• Top column controls only lights and has a programmable column type
(choose from the list on the following pages).
• Bottom column controls only shades and has a programmable column type
(choose from the list on the following pages).
• Engraving options: General (EGN) and Non-Standard (NST).
Shades Only
• Controls only shades.
• Models with preset buttons have programmable preset levels.
• Engraving options: Standard (E01), Secondary (E02), and Non-Standard (NST).
16
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 17 09.24.19
Lutron seeTouch QS
Available Column Types
Scene (with Off)
• Controls pre-programmed scenes on one or more scene controllers (such as a GRAFIK Eye QS,
or an area on an Energy Savr Node).
• Buttons within a column control the same scene controller(s) (different buttons within a column cannot control
different scene controllers).
• The scene recalled by the first button in a column is programmable, subsequent buttons recall the next numerical
scene, and the last button always recalls Scene Off.
• A 1-button scene wallstation will always toggle between the assigned scene and Scene Off.
Scene (without OFF)
• Identical function to scene with Off, except the last button in a column recalls the next consecutive scene, not
Scene Off.
Zone Toggle
• Buttons toggle a zone or group of zones between programmable preset values and Off (where all zones are Off).
• Each zone can be programmed to a different value.
• Each button can be individually programmed to a different zone or group of zones.
Partition
• Allows the user to assign individual buttons of a column to different scene controllers (areas).
• One button press (button LED lights) indicates an open partition within the space so that devices programmed to
that button talk to each other in both directions.
• A second button press (button LED goes off) indicates a closed partition within the space so that devices
programmed to that button function independently.
2B Partition (2-button wallstation only)
• Identical function to partition, except that there are two buttons.
• A top button press indicates an open partition; a bottom button press indicates a closed partition.
2B Fine Tune (2-button wallstation only)
• Buttons function as raise and lower buttons for assigned zones.
• A button tap will raise / lower the level of assigned zones by 1 percent.
• Pressing and holding the buttons smoothly raises to high end or smoothly lowers to low end.
2B Sequence (2-button wallstation only)
• All assigned scene controllers continuously cycle through either Scenes 1-4 or Scenes 5-16 using the
programmed fade times for each scene.
• Useful for spaces that desire dynamic lighting, such as decorative lighting or displays in retail stores.
(continued on next page)
17
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 18 09.24.19
Lutron seeTouch QS
Available Column Types (continued)
2B Panic (2-button wallstation only)
• Button press causes all assigned scene controllers go to Scene 16.
• Temporarily disables all button presses and ignores scene or zone level changes.
2B Timeclock (2-button wallstation only)
• Allows the user to enable or disable the timeclock on a GRAFIK Eye QS.
• A top button press enables the timeclock; a bottom button press disables the timeclock.
Shade
• Wallstation must have more than 1 button.
• Raise / Lower buttons are recommended for programming.
• The top button becomes the Open button; the bottom button becomes the Close button for associated Lutron
Sivoia QS shades or third-party AC shades.
• For keypads with more than two buttons, the middle buttons are programmable preset buttons.
Shade Group
• Available only on a multi-column keypad where another column is a shade column.
• Allows the shade column to operate as multiple independent keypads (one per group).
• The shade group column selects which independent keypad is currently active (indicated by the group button
whose LED is lit).
Note: Column types can be changed using the GRAFIK Eye QS programming menu
(e.g., control programmed as lights only can be changed to shades only).
18
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 19 09.24.19
Lutron seeTouch QS
How to Build a Standard seeTouch QS Model Number
QSWS2- -WH-
Prefix
White
Matte
Finish
Button
Configuration
(see next page)
Insert
Style
N: Non-insert
I: Insert
Engraving Codes
-G: Generic
-S: Shades
-H: Hotel Room
-A: Auditorium
-L: Lobby
-R: Resturant
-T: Re ta il
-C: Classroom
-M: Meeting Room
-B: Ballroom
-P: Private Office
-Z: Zone Toggle
-D: Shade Dual Zone
-K: Lights Dual Zone
-U: Lights and Shades A
-Q: Lights and Shades B
Engraving
Code
19
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 20 09.24.19
Lutron seeTouch QS
Standard seeTouch QS Wallstation Button Functions Summary* (WH Only)
Button Configurations
2B 3B 5B 7B
Generic
Shades
Hotel Room
Auditorium
Button Configurations
2B 3B 5B 7B
Lobby
Restaurant
Retail
Classroom
On All On
Off All Off
1 All On
Open All On
2 Event
Preset 1
After Hours
Off All Off
Close All Off
1 All On
Open All On
1 All On
Open All On
2 Morning
Preset 1 Breakfast
2 Morning
Preset 1 Breakfast
4 Evening
Preset 3 Dinner
4 Evening
Preset 3 Dinner
6 Event
Preset 5 Cleaning
3 Afternoon
Preset 2 Lunch
3 Afternoon
Preset 2 Lunch
Off All Off
Close All Off
5
After Hours
Preset 4
After Hours
Off All Off
Close All Off
Open All On
Close All Off
High All On
Low
After Hours
Off All Off
High All OnWelcome All On
Medium MorningFoyer Morning
Nightlight EveningBed Evening
Bedside Cleaning
Low AfternoonLiving Afternoon
Off All OffBath
After Hours
Off All Off
DND All On
MUR All Off
All On All On
Present Present
All Off All Off
All On All OnAll On All On
Present PresentPresent Present
Exam ExamExam Exam
Cleaning Cleaning
Lecture LectureLecture Lecture
All Off All OffPerform Movie
All Off All Off
All On All On
All Off All Off
* Standard engraving text does not automatically assign or re-assign system programming to the QS keypad buttons.
Project-specific customer input and programming by a Lutron service team member is still required to achieve a desired
sequence of operation / system functionality per control.
20
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 21 09.24.19
Lutron seeTouch QS
Standard seeTouch QS Wallstation Button Functions Summary (WH only) (continued)
Button Configurations
1RLD 2RLD 3BD
Shades – Dual Zone
N/A N/A
Lights and Shades A
Lights Dual Zone
N/A
Lights and Shades B
N/A N/A
Button Configurations
1B 2B 3B 5B 7B
Meeting Room
N/A
Ballroom
N/A
Private Office
N/A N/A
Zone Toggle
All On
All Off
All On
All On
Meeting
Event 1
All Off
All Off
All On
All On
All On
All On
Meeting
Event 1
Meeting
Event 1
Cleaning
Event 3
Pendant
Event 3
Event
Event 5
A / V
Event 2
A / V
Event 2
All Off
All Off
Perimeter
Event 4
All Off
All Off
All On
All Off
On
Dim
Off
On
Dim
Zone 2
Zone 1
Off
All On
All Off
Zone 1
Zone 2
Zone 3
Zone 1 Zone 1
Zone 2 Zone 2
Zone 4 Zone 4
Zone 6
Zone 3 Zone 3
Zone 5 Zone 5
Zone 7
Zone 1
On/Off
Zone 2
Open
Open
On
On
Open
Open
On
Close
Close
Off
Off
Close
Close
Off
On
Preset
Off
On
On
On
On
Open
Open
Preset
Preset
Preset
Preset
Preset
Stop
Off
Off
Off
Off
Close
Close
21
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 22 09.24.19
Lutron seeTouch QS
Color/Finish Codes
Architectural Matte Finishes
White WH
Ivory IV
Beige BE
Gray GR
Brown BR
Black BL
Almond AL
Light Almond LA
Taupe TP
Architectural Metal Finishes
With black plastic buttons (standard).
Bright Brass BB
Bright Chrome BC
Bright Nickel BN
Satin Brass SB
Satin Chrome SC
Satin Nickel SN
Antique Brass QB
Antique Bronze QZ
Anodized Aluminum Finishes
With black plastic buttons (standard).
Clear CLA
Black BLA
Brass BRA
Satin Colors Matte Finishes
Available with Insert (I)
style controls only.
Snow SW
Midnight MN
Taupe TP
Biscuit BI
Eggshell ES
Palladium PD*
Hot HT*
Merlot MR*
P l u m P L*
Sienna SI*
Terracotta TC*
Bluestone BG*
Green briar GB*
Goldstone QS*
Mocha stone MS*
Stone ST*
Desert Stone DS*
Limestone LS*
* Note: Some Satin Colors units ship
with different color buttons. For
more information, please visit the
seeTouch website at
www.lutron.com/seetouch
* For the latest color offerings please
see our website:
http://www.lutron.com/satincolors
How to Build a Custom seeTouch QS Model Number
QSWS2- - -
Engraving Codes
Omit: Unengraved
EGN: General Engraving
For “Lights only” and “Lights and Shades”
controls
E01: Standard Engraving
For “Shades only” controls
E02: Secondary engraving for “Shades only” controls
NST: Non-Standard Text Engraving
Please visit the GRAFIK Eye QS website at
www.lutron.com/grafikeyeqs for custom
engraving forms
Prefix
Color/
Finish
Button
Configuration
(see next
page)
Engraving
Code
Insert
Style
N: Non-insert
I: Insert
Engraving Notes
• The engraving option (model number and suffix)
is related to the control type, as shown above in
the "How to Build a Standard seeTouch QS
Model Number" section.
• Four engraving options are available:
1. EGN: General engraving for ‘Lights Only’ and
‘Lights and Shades’ controls
2. E01: Standard engraving for ‘Shades Only’
controls and ‘Lights and Shades’ for
model QSWE-10BRLI-WH-E01 only
3. E02: Secondary engraving for ‘Shades Only’
controls
4. NST: Non-standard engraving for ‘Lights
Only’, ‘Lights and Shades’, or ‘Shades
Only’ controls
• If no engraving is specified, wallstations will ship
with an engraving certificate, with EGN being its
default engraving type.
If no color is specified, wallstations will ship with white (WH) finish.
22
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 23 09.24.19
Lutron seeTouch QS
Custom seeTouch QS Wallstation Button Functions Summary
Button Configuration
1B 2B 3B 5B 7B 1RLD 2RLD 3BD
EGN (General Engraving) Functionality
E01 (Standard Engraving) Functionality
N/A N/A
E02 (Secondary/Shades Only Engraving) Functionality
N/A N/A N/A N/A N/A N/A N/A
Legend:
Light Control
Shade Control
Scene 1
Scene 2
Scene 3
Scene 1
Scene 1
Open
Open
Open
Scene 1
Open
Open
Open
Open
Off
Close
Close
Close
Off
Close
Close
Close
Close
Scene 1
Open
Scene 2
Preset 1
Scene 4
Preset 3
Scene 3
Preset 2
Off
Close
Scene 1
Scene 2
Scene 4
Scene 6
Scene 3
Scene 5
Scene 7
Scene 1
Group 1
Blackout
Scene 2
Group 2
Sheer
Scene 3
Group 3
Both
Scene 1
Open
Open
Open
Open
Scene 2
Preset
Preset
Preset
Preset
Scene 3
Close
Close
Close
Close
23
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 24 09.24.19
Lutron seeTouch QS
How to Build a seeTouch QS Model Number
1B
1-button
2B
2-button
3B
3-button
5B
5-button
7B
7-bu tton
2BRL
2-button with
raise / lower
3BRL
3-button with
raise / lower
5BRL
5-button with
raise / lower
2BRLIR
2-button with IR
receiver and
raise / lower
3BRLIR
3-button with IR
receiver and
raise / lower
5BRLIR
5-button with IR
receiver and
raise / lower
2RLD
Dual 2-button with
raise / lower
3BD
Dual 3-button
1RLD
Dual with 3-button
and 2-button with
raise / lower
Button Configurations
24
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 25 09.24.19
Lutron seeTouch QS
Non-Insert Kit
Insert Kit
Faceplate Information
Faceplate Replacement Kits
Use faceplate replacement kits to change: colors, button configuration, engraving, between insert and
non-insert versions. Each kit includes an adapter, button assembly, and wallplate
Non-insert style controls: Faceplate complements a
specified button kit. When the faceplate is removed or
replaced, the buttons are removed and replaced along with it.
Insert style controls: Faceplate is a decorator style with a
universal size opening that fits all button kits. This style allows for
easy replacements of button kits without changing the faceplate.
Model Numbers for Kits
Non-Insert Insert
QSWS2R-1BN QSWS2R-1BI
QSWS2R-2BN QSWS2R-2BI
QSWS2R-3BN QSWS2R-3BI
QSWS2R-5BN QSWS2R-5BI
QSWS2R-7BN QSWS2R-7BI
QSWS2R-2BRLN QSWS2R-2BRLI
QSWS2R-3BRLN QSWS2R-3BRLI
QSWS2R-5BRLN QSWS2R-5BRLI
QSWS2R-1RLDN QSWS2R-1RLDI
QSWS2R-2RLDN QSWS2R-2RLDI
QSWS2R-3BDN QSWS2R-3BDI
QSWS2R-2BRLIRN QSWS2R-2BRLIRI
QSWS2R-3BRLIRN QSWS2R-3BRLIRI
QSWS2R-5BRLIRN QSWS2R-5BRLIRI
25
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 26 09.24.19
Lutron seeTouch QS
4
3
2
1
Wallstation Installation
QS Link Wiring
• Use SELV / PELV / NEC
® Class 2 wiring to connect
wallstations to the QS Link.
• Connect two 22 AWG (0.5 mm
2
) shielded, twisted
pair wires to terminals 3 and 4 of the wallstation’s
control link connector. Shielding (drain) of the
twisted pair wires must be connected together
as shown, but do not connect the shielding to
earth / ground or the wallstation and do not allow it
to contact the grounded wallbox.
• Connect the appropriate size wires to terminals
1 and 2 for power, according to your link length
(see table below).
• Connect drain / shield as shown. Do not connect to
ground (earth) or wallstation. Connect the bare
drain wires and cut off the outside shield.
Note: Use appropriate wire connecting devices as
specified by local codes.
4
3
2
1
C
B
A
(2) 18 AWG
(1.0 mm
2
)
(2) 12 AWG
(4.0 mm
2
)
(2) 18 AWG
(1.0 mm
2
)
(2) 12 AWG
(4.0 mm
2
)
Data Link:
(1) twisted, shielded pair
22 AWG (0.5 mm
2
)
3: MUX
4: MUX
Back View
D: drain / shield
QS Link Wire Sizes (check compatibility in your area)
QS Link Wiring Length Wire Gauge Lutron Cable Part Number
Less than 500 ft (153 m)
Power (terminals 1 and 2)
1 pair 18 AWG (1.0 mm
2
) GRX-CBL-346S (non-plenum)
GRX-PCBL-346S (plenum)
Data (terminals 3 and 4)
1 twisted, shielded pair 22 AWG (0.5 mm
2
)
500ft to 2000 ft
(153 m to 610 m)
Power (terminals 1 and 2)
1 pair 12 AWG (4.0 mm
2
) GRX-CBL-46L (non-plenum)
GRX-PCBL-46L (plenum)
Data (terminals 3 and 4)
1 twisted, shielded pair 22 AWG (0.5 mm
2
)
Link Wiring (500 ft/153 m to 2000 ft/610 m)
Link Wiring (<500 ft/153 m)
SELV / PELV / NEC® Class 2
Control wiring
(2) 18 AWG (1.0 mm
2
)
1: Common
2: V+
SELV / PELV / NEC
® Class 2
Control wiring
(2) 18 AWG (1.0 mm
2
)
1: Common
2: V+
Data Link:
(1) twisted, shielded pair
22 AWG (0.5 mm
2
)
3: MUX
4: MUX
26
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369489e 27 09.24.19
Lutron seeTouch QS
Contact Closure Inputs
Specifications
• Inputs must be dry contact closure, solid-state,
open collector, or active-low (NPN) / active-high
(PNP) output.
– Open collector NPN or active-low on-state
voltage must be less than 2 V- and sink 3.0 mA
– Open collector PNP or active-high on-state
voltage must be greater than 12 V- and source
3.0 mA
• Wallstation is miswire protected up to 36 V-.
• Outputs must stay in the closed or open states for
at least 40 msec in order to be recognized by the
wallstation.
Contact Closure Input Wiring
• Use low-voltage SELV / PELV / NEC
® Class 2 wiring
to connect the contact closure inputs to the
wallstation.
Input 2
Input 1
Common
(3) 18 AWG
(1.0 mm
2
)
4
3
2
1
C
B
A
Back View
)Lutron, Lutron, GRAFIK Eye, Nova T*, Quantum, Satin Colors, seeTouch, Sivoia, Energi Savr Node, and Vareo are trademarks or registered trademarks of Lutron Electronics
Co., Inc. in the US and/or other countries.
NEC is a registered trademark of National Fire Protection Association, Quincy, Massachusetts.
27
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

QSWS2 seeTouch QS Wallstation Specification Submittal (369489)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 16 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document