Description Prole
Color Calculations Total
(A)
DECRA Villa Tile
25.2 panels per square
14-1/2” exposure – min pitch 3:12
Squares x 25.2= Panels
(6-10% Waste Factor)
DECRA Villa Tile Panel Vent
Ventilation Calculator
available at www.decra.com
(B)
Tile Hip & Ridge
A
s needed for hips, ridges & rake/gables
14-1/2” exposure
Linear Feet x 12 ÷ 14.5 = Pieces Needed
Tile End Cap
A
s needed for closure at hip, ridge & rake/
gable at eave
DECRA Ridge Vent
(2) 20’ rolls / package
(2) 2-1/2” W x 1” H x 20’ L
n/a
Linear Feet Ridge ÷ 20 = Packages Needed
Ventilation Calculator
available at www.decra.com
(C)
Villa/XD DECRA Channel
For use along hips (both sides)
and rakes/gables (nish with H&R Piece)
Also for use along sidewalls, including
skylights and chimneys
6’6” Length
n/a
Linear Feet ÷ 6 = Pieces Needed
(x2) For Hips
(x1) for Other
(Includes 6” overlap)
(D)
Villa Bird Stop - Eave
For use along eaves at rst course
5’ Length
Linear Feet of Eave ÷ 5 = Pieces Needed
(When estimating allow for 7/8”overlap)
(E)
Villa Bird Stop - Ridge
For use along ridges, on both sides of ridge
5’ Length
(Linear Feet Ridge x 2) ÷ 5 = Pieces Needed
(When estimating
allow
for approx. 1-1/2”overlap)
(F)
Villa Valley
17” Wide
6’6” Length
n/a
Linear Feet ÷ 6 = Pieces Needed
(Includes 6” overlap)
(G)
Villa Underpan
18-1/4” x 22”
(Use with Non-Lead Pipe Jacks)
n/a
1 per Roof Penetration
Side Flashing
For use to counter ash side wall
6’6” Length
Linear Feet ÷ 6 = Pieces Needed
(Includes 6” Overlap)
Flat Sheet
16” x 54”
Corrosion Resistant Screws
#9 Hex (1/4” diameter) x 1-1/2” long
2,000 / box
Use fasteners of sufcient length to penetrate
through the sheathing (deck) by at least 1/2”
n/a
1 Box (2,000 pcs) per 15 Squares
Color Coordinated Corrosion
Resistant Screws
#9 Hex (1/4” diameter) x 1-1/2” long
500 pc / bag
4 bags / box
(Number of Hip & Ridge Pieces +
Linear Feet Fascia/Bird Stop - Eave) x 2
1x2 and or 2x2 Timber Battens
(Non-Treated)
Stacked 2x2s / 1x2s at rake/gable, hips and
ridges as needed
n/a
1x4 Timber Battens
(Non-Treated)
For use on rst course
n/a
Touch-Up Kit or 5 lb. Bag of Chip
Use at penetrations, transitions & panels
Bag of stone chip & cartridge of roof sealant
or 5 lb. Bag of Chip
Colors: Amal Sand, Capri Clay, Pompeii Ash, Rustico Clay and Venetian Gold
*CONSULT LOCAL BUILDING CODES. **HIGH WIND AREAS REQUIRE ADDITIONAL FASTENERS. COPPER AND LEAD ACCESSORIES ARE NOT TO BE USED DUE TO DISSIMILAR METAL REACTION.
This estimate is provided in good faith and should not be assumed to reect the exact components required to roof this plan. DECRA Roong Systems will not be held liable for the accuracy of this estimate.
Project Name: Date:
98090191 – 0315
Estimating Sheet - DECRA Villa Tile - Direct to Deck
Select
Select
Select
Select
Select
Select
Select
Select
SelectScrewColor
Select
Select
Villa
Underpan (G)
Slope
Slope
Villa Bird Stop - Eave (D)
Villa Bird Stop - Ridge (E)
Villa Bird Stop - Ridge (E) & Tile Hip & Ridge (B)
Villa Bird Stop - Ridge (E)
Villa Bird Stop - Eave (D)
Tile Hip & Ridge (B)
Villa/XD DECRA Channel (C)
Field Panels (A) Field Panels (A)
Chimney
Villa/XD DECRA
Channel
(C)
Villa/XD DECRA
Channel (C)
Foam Closure
Slope
Slope
Field Panels (A)
Field Panels (A)
Field Panels (A) Field Panels (A)
Field Panels (A)
Villa Bird Stop - Eave (D)
Villa Bird Stop - Ridge (E) & H& R (B)
Villa Bird Stop - Ridge (E)
Villa Valley (F)
Villa Valley (F)
Tile Hip & Ridge (B)
Villa/XD DECRA Channel (C)
Tile Hip & Ridge (B)
Villa/XD DECRA Channel (C)
Tile Hip & Ridge (B)
Villa/XD DECRA Channel (C)
Villa Bird Stop - Eave (D)
Villa Bird Stop - Eave (D)
(A) Villa Tile Field Panels
(6-10% waste)
25.2 panels per square
(B) Tile Hip & Ridge
(along hip, ridge and rake/gable)
Tile Hip & Ridge Pieces
14-1/2” exposure
(C) Villa/XD DECRA Channel
(rake/gable, roof-to-wall and
along both sides of the hip)
6’6” Lengths
(D) Villa Bird Stop - Eave
5’ Lengths
(E) Villa Bird Stop - Ridge
5’ Lengths
(F) Villa Valley
6’6” Lengths
(G) Villa Underpan
18-1/4” x 22”
aTin Snips aTape Measure
aLocal Code Requirements aCircular Saw
aTable Saw aScrew Gun
aRoong Grade Sealant/Adhesive aHand Seamer
aGalvanized Pipe Jacks
(No Lead)
aSpray Paint
a2 x 2s to secure Hip & Ridge Pieces along rakes/gables, hips and ridges
(Should equal the same linear footage as total Hip & Ridge Pieces, each
Hip & Ridge Piece equals 14-1/2”)
a1 x 4s or 1 x 2s (in same total linear feet as Villa Bird Stop - Eave) set back
15-1/2” from the fascia. measurement (D) in the roof diagram above.
Secure lumber and the back of the rst course of panels using No. 9
screws that will t at to the 1 x 4 and are long enough to securely
penetrate the deck.
aVilla Bird Stop – Eave overlaps 7/8” and must be notched to assure proper
t into Villa Channel at rake/gable, hip and roof-to-wall.
aOne layer of Underlayment is required.
Panels Needed
Rafter Length
Eave Length
For Installation Questions Call DECRA Roong Systems at 800-258-9740
Use as guide only
1’ 2” 1 3’ 3”
2’ 4.5” 2 6’ 6”
3’ 7” 3 9’ 9”
4’ 9.5” 4 13’
6’ 5 16’ 3”
7’ 2.5” 6 19’ 6”
8’ 5” 7 22’ 9”
9’ 7.5” 8 26’
10’ 10” 9 29’ 3”
12’ 10 32’ 6”
13’ 3” 11 35’ 9”
14’ 5.5” 12 39’
15’ 8” 13 42’ 3”
16’ 10.5” 14 45’ 6”
18’ 15 48’ 9”
19’ 3.5” 16 52’
20’ 6” 17 55’ 3”
21’ 8.5” 18 58’ 6”
22’ 11” 19 61’ 9”
24’ 1.5” 20 65’
98090191 – 02/13
Measuring DECRA Stone Coated Steel Villa Tile Direct to Deck
Tile Hip & Ridge (B)
Villa/XD DECRA Channel (C)
Tile Hip & Ridge (B)
Villa/XD DECRA Channel (C)