Description Prole
Color Calculations Total
(A)
DECRA Shingle XD
®
23.8 panels per square
12-1/4” exposure – min pitch 4:12
Squares x 23.8 = Panels
(10-15% Waste Factor)
DECRA Shingle XD
®
Panel Vent
Ventilation Calculator
available at www.decra.com
(B)
Shingle Hip & Ridge
A
s needed for hip and ridge
25-3/4” Exposure
Linear Feet ÷ 2 = Pieces Needed
DECRA Ridge Vent
(2) 20’ rolls / package
(2) 2-1/2” W x 1” H x 20’ L
n/a
Linear Feet Ridge ÷ 20 = Packages Needed
Ventilation Calculator
available at www.decra.com
(C)
Starter Clip w/ Drip Edge
6’6” Length
n/a
Linear Feet of Eave ÷ 6.4 = Pieces Needed
(Allow for 1” Overlap)
(D)
Short Course Clip
6’6” Length
n/a
Use with standard drip edge & allow for 1”
overlap if using as alternative starter.
Linear Feet of Eave ÷ 6.4 = Pieces Needed
(E)
XD
®
Rake/Gable Channel
For use along rakes/gables
(Use standard drip edge as needed under channel)
6’6” Length
Linear Feet Rake/Gable ÷ 6 = Pieces Needed
(Includes 6” Overlap)
(F)
Villa/XD DECRA Channel
For use at roof to side walls,
along hips (both sides) (x2)
6’6” Length
Linear Feet ÷ 6 = Pieces Needed
(x1) for sidewalls, including skylights and chimneys
(x2) for hips
(Includes 6” overlap)
(G)
XD
®
Debris Guard
For use along rakes/gables, hips & valleys as needed
(2) 2” W x 3/8” H x 50’ L
n/a
Linear Feet Rake/Gable ÷ 50 = Rolls Needed
Linear Feet Hips/Valleys ÷ 50 (2) = Rolls Needed
(H)
XD
®
Valley & Cap
Sold separately
6’6” Length
n/a
Linear Feet of Valley ÷ 6 = Pieces Needed
(Includes 6” Overlap)
Valley
Cap (stonecoated)
(I)
XD
®
Underpan
24-3/4” x 30”
(Use with Non-Lead Pipe Jacks)
n/a
1 per Roof Penetration
Side Flashing
For use to counter ash side wall
6’6” Length
Linear Feet ÷ 6 = Pieces Needed
(Includes 6” Overlap)
Flat Sheet
16” x 54”
Corrosion Resistant Screws
#9 Hex (1/4” diameter) x 1-1/2” long
2,000 / box
Use fasteners of sufcient length to penetrate
through the sheathing (deck) by at least 1/2”
n/a
1 Box (2,000 pcs) per 15 Squares
1x2 and or 2x2 Timber Battens
(Non-Treated)
Stacked 2x2s / 1x2s at hips and ridge as needed
n/a
Touch-Up Kit or 5 lb. Bag of Chip
Use at penetrations, transitions & panels
Bag of stone chip & cartridge of roof sealant
or 5 lb. Bag of Chip
Colors: Classic Cobblestone, Midnight Eclipse, Natural Slate, Old Hickory and Woodland Green
*CONSULT LOCAL BUILDING CODES. **HIGH WIND AREAS REQUIRE ADDITIONAL FASTENERS. COPPER AND LEAD ACCESSORIES ARE NOT TO BE USED DUE TO DISSIMILAR METAL REACTION.
This estimate is provided in good faith and should not be assumed to reect the exact components required to roof this plan. DECRA Roong Systems will not be held liable for the accuracy of this estimate.
Project Name: Date:
98090269 – 01/21
Estimating Sheet - DECRA Shingle XD
®
- Direct to Deck
For Installation Questions Call DECRA Roong Systems at 800-258-9740
aTin Snips aTape Measure aTable Saw
aCircular Saw aScrew Gun aSpray Paint
aRoong Grade Sealant/Adhesive aHand Seamer aGalvanized Pipe Jacks
(No Lead)
aFollow Local Code
aUse 2 x 2s and 1 x 2s as needed to secure Hip & Ridge Pieces along hips and ridges. (Should equal the
same linear footage as total Hip & Ridge Pieces; each Hip & Ridge Piece equals 25-3/4”)
aOne layer of Underlayment is required.
(A) Shingle XD
®
Field Panels
(10-15% waste)
23.8 panels per square
(B) Shingle Hip & Ridge
(along hip and ridge)
25-3/4” Exposure
(C) Starter Clip with Drip Edge
(along eave for starter)
6’6” Lengths
(D) Short Course Clip
(short course or as alternative to
Starter Clip along eave)
6’6” Lengths
(E) XD
®
Rake/Gable Channel
(along rake/gable)
6’6” Lengths
(F) Villa/XD DECRA Channel
(roof-to-wall and along
both sides of the hip)
6’6” Lengths
(G) XD
®
Valley
6’6” Lengths
(H) Valley Cap
6’6” Lengths
(I) XD
®
Underpan
24-3/4” x 30”
Short Course Clip (D)
Lower Roof
Chimney
Starter Clip w/Drip Edge (C)
Wall
Gable
Field Panels
(A)
Starter Clip w/Drip Edge(C)
XD
®
Underpan (I)
Slope
Slope
Slope
Villa/XD DECRA
Channel (F)
Slope
Starter Clip w/Drip Edge (C)
XD
®
Rake/Gable Channel (E)
Field Panels (A)
Field Panels (A)
Field Panels (A)
Field Panels (A)
Field Panels (A)
Field Panels (A)
Wall
Villa/XD DECRAChannel (F)
Shingle Hip & Ridge (B)
Starter Clip w/Drip
Edge (C)
XD
®
Rake/Gable Channel (E)
Starter Clip w/Drip
Edge (C)
Villa/XD DECRA Channel (F)
Starter Clip w/Drip Edge (C)
X
gle
ke/Gable Channel (E)
Shingle Rake/Gable Channel (E)
XD
®
Rake/Gable Channel (E)
Shingle Hip & Ridge (B)
Shingle Hip & Ridge (B)
XD
®
Valley (G)
& Cap (H)
XD
®
Valley (G)
& Cap (H)
98090269 – 01/21
DECRA Estimating Sheet Shingle XD
®
Direct to Deck
www.decra.com
Shingle Hip & Ridge (B)
Villa/XD DECRA Channel (F)
Shingle Hip & Ridge (B)
Villa/XD DECRA Channel (F)