®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive
PowPak Single Zone Control Module with EcoSystem Wireless Lighting Control
3691103d 1 12.21.18
PowPak Single Zone Control Module
with EcoSystem
The PowPak Single Zone Control Module with
EcoSystem is a radio frequency (RF) control that
operates up to 32EcoSystem LED drivers or fluorescent
ballasts for the purpose of high performance dimming
and control in a Vive system or with Vive standalone
products. This control is based on input from Pico
remote controls and RadioPowr Savr sensors. The
control module is ideal for small areas (e.g.,classrooms,
conference rooms, private offices).
Communication with RF input devices (e.g., Pico remote
controls, Radio Powr Savr sensors) is accomplished by
using Lutron Clear Connect RF technology.
These products are also compatible with the Vive hub
which enables a simple setup process using the free
Lutron Vive app (available for download from the App
Store or Google PlayR online marketplace) or by using
web-based software with any Wi-FiR enabled iOSR or
AndroidR compatible device. It also enables control and
monitoring of all Vive devices. The Vive hub can be
added at any time. System reprogramming will be
required. For a complete list of features supported with
the Vive hub, see specification submittal 369902.
Features
• CompatiblewithanyLutronEcoSystemLEDdriveror
ballast for high performance dimming and control.
• Controlsupto32EcoSystemfixturesinasinglezone.
–Allfixtureswillbeatthesamelightlevelandcannotbe
individually controlled
• Configurablehigh-andlow-endtrim.
• Receiveswirelessinputsfromupto10Picoremote
controls,10RadioPowrSavr occupancy / vacancy
sensors,and1RadioPowrSavrdaylightsensor.
• UtilizesLutronClearConnectRFTechnology;referto
model number chart below for frequency band data.
• Mountstoa4inx4in(102mmx102mm)square
junctionboxthrougha0.5in(20mm)knockout.
Models
Model Number Description Region Operating Voltage Frequency Band
RMJS-ECO32-SZ 32 device controller
U.S.A.,Canada,Mexico 120–277V~ 431.0437.0MHz
Note: Contact Lutron for frequency band compatibility for your geographic region if it is not indicated above.
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive
PowPak Single Zone Control Module with EcoSystem Wireless Lighting Control
3691103d 2 12.21.18
Specifications
Regulatory Approvals
• ULListed
• FCCapproved.ComplieswiththelimitsforaClassB
device,pursuanttoPart15oftheFCCrules
• DALI-2Certified
• cULandIC
• NOM
• UL2043PlenumRated
• ListedinaccordancetoCAN/ULCS102.2-2010with
a Flame Spread Rating of 0 and a Smoke Developed
Classificationof40,withaminimumspacingof6ft
(1.83m)offcenter.
• CompatiblewithDALI-compliantloads
Power
• 120–277V~50/60Hz,max.current80mA
Other Power Specifications
• Standbypower:
120–277V~<1.0W
System Communication
• OperatesusingClearConnectRFTechnologyfor
reliable wireless communication
• Wirelesssensorsandcontrolsmustbelocatedwithin
30ft (9m) of the associated control module.
Key Design Features
• LEDstatusindicatorshowsloadstatusandprovides
programming feedback
• Configurablehigh-endandlow-endtrim
• Powerfailurememory:Ifpowerisinterrupted,
connected loads will return to the previous level prior
to interruption
Environment
• Ambientoperatingtemperature:32°Fto104°F
(0°Cto40°C)
• 0%to90%humidity,non-condensing
• Forindooruseonly
Mounting
• Thisdevicecanbeinstalledonajunctionbox
ormarshallingboxusingtheconduitnutorwith
mounting screws and must be installed away from
afixture/troffer.ThedevicemustNOTbemounted
insideoronafixture/trofferorothermetallic
enclosure.
• ForapplicationswherecoderequiresthePowPak
Control Module to be installed inside an additional
junctionbox(e.g.,U.S.A.),pleaseseeLutron
ApplicationNote#423(P/N048423)at
www.lutron.com. For all other installations, refer to
the installation instructions and consult local and
national electric codes for proper installation.
• ThePowPakControlModuleneedstobeaccessible
for some programming steps. Record where it is
mounted so that it can be easily located later.
Metal Ceiling Mounting
• Metalceilinggridsmusthavea>0.12in(3mm)gap
ofnon-metalmaterialwhichextendstheentirelength
of the tile on at least one edge. This is often achieved
by foam spacers that are used to prevent tile-to-tile
rattling.
• Metalceilinggridswhicharecontinuous(withno
gap) or those that are interlocked, must have a total
surface area that is less than 900ft
2
(81m
2
) for
each section. The overall space can be larger as
long as there are non-metal sections bordering or
intersecting the metal sections.
Continuedonnextpage...
NOTICE:Improperinstallationcanresultin
degraded wireless communication and/or
intermittent or sustained communication failures,
and will not be covered under warranty.
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive
PowPak Single Zone Control Module with EcoSystem Wireless Lighting Control
3691103d 3 12.21.18
Specifications (continued)
EcoSystem/DALI Link
• 18V-
• GuaranteedSupplyCurrent:64mA
• MaximumSupplyCurrent:250mA
• ConnectstoLutronEcoSystemLEDdriversorballasts
Controls up to 32 EcoSystem drivers or ballasts
Multiple drivers / ballasts connected to a Control
Modulewillalwaysworktogetherasasinglezone
• CanbewiredasClass1orIECPELV/NECR Class2.
Formoredetails,seeLutronApplicationNote#142
(P/N048162)atww.lutron.com
• Polarityfree
• Topologyfree
• ThePowPakControlModuleisasinglemastercontroller
andthereforenoothercontrollersmayexistonthe
same link.
• Ensurethatthereisnogreaterthana2V~ drop
between the Control Module and the end of the link.
Note: Wired sensors connected to EcoSystem devices
areNOTsupported.
Wire Gauge Total Digital Link Wire Length
EcoSystem DALI
12AWG(4.0mm
2
) 2200ft(671m) 984ft(300m)*
14AWG(2.5mm
2
) 1400ft(427m) 984ft(300m)*
16AWG(1.5mm
2
) 900ft(275m) 900ft(275m)
18AWG(1.0mm
2
) 570ft(175m) 570ft(175m)
Lutron Qualified DALI Control Gear
• LutronrequiresthatallDALIdevicesthatareintendedto
be used with a Lutron controller must be pre-tested by
Lutron and determined to be compatible before being
used on a project.
• ForacompletelistofLutronqualifiedDALIballasts
pleaserefertoApplicationNote#482(P/N048482)at
www.lutron.com
Default Operation
• Associatedwirelessinputdevicescontrolall
connectedfixturestogether
• OccupancySensors:
– Occupied:100%;Unoccupied:0%(OFF)
• PicoRemoteControls:
– On:100%;FavoriteLevel:50%;Off:0%(OFF)
• DaylightSensor:Decreaseselectriclightinresponse
to additional available daylight
*MaximumrecommendedlengthasperIEC62386-101Ed.2.0
3
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive
PowPak Single Zone Control Module with EcoSystem Wireless Lighting Control
3691103d 4 12.21.18
Advanced Configurations
Pico Remote Controls
• Upto10Picoremotecontrols
• FavoritelevelscanbesetforeachPicoremotecontrol
Radio Powr Savr Daylight Sensor
• TheRadioPowrSavrdaylightsensorwillaffectall
connected LED drivers and ballasts equally
• Formultiplerowsofdaylighting,aseparatePowPak
Control Module must be used for each daylighting row
Minimum Light Level Setting (optional)
• Certainapplications,suchashallways,mayrequire
that the lights never turn off. For these areas, select the
minimum light level option and the load will lower to
programed low-end level. Default operation lowers to
OFF.
High- and Low-End Trim
• High-endandlow-endtrimaffectallconnectedfixtures
equally, and can be configured from the PowPak
Control Module.
• Adjustablelow-endtrim(0.1%–45%)*.Trimmable
low-endcanensureastablelightlevel.Somefixtures
will flicker or drop out if trimmed too low.
• Themaximumlightoutputofconnectedfixturescanbe
decreaseddownto55%forenergysavingsinover-lit
spaces.
Note: The perceived light output of low-end trim may
varybetweenfixturemanufacturersandmodel
numbers.Forbestresults,donotmixdifferentdrivers
or ballasts on the same EcoSystem circuit.
Radio Powr Savr Occupancy Sensors
• RadioPowrSavroccupancyandvacancysensors
control all connected drivers or ballasts.
• Picoremotecontrolscanbeusedtoadjustthe
occupiedlevelsoffixturesthattheycontrolfrom
0.1%*to100%(ofoutputsignal)orcanmakethem
unaffected by occupancy events.
• Vacancyevents(areabecomesunoccupied)turnall
driver or ballast models off or to minimum light level.
*Low-enddependsontheminimumoutputoftheconnected
drivers or ballasts.
4
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive
PowPak Single Zone Control Module with EcoSystem Wireless Lighting Control
3691103d 5 12.21.18
System Diagram
Wiring Schematic
RadioPowrSavrOccupancySensor(upto10)
RadioPowrSavrDaylightSensor(upto1)
PicoRemoteControl(upto10)
LED Drivers FluorescentBallasts
EcoSystem control
Toadditionalfixtures
(32devicesmaximum)
L i n e / H o t
JunctionBox
Neutral
E1/DA+
E2/DA-
EcoSystem to LED Drivers / Fluorescent
Ballasts
0.5in(21mm)trade-sizeknockoutopening
Note: Multiple drivers / ballasts connected to a PowPak Control Module
willalwaysworktogetherasasinglezone.
Note: The perceived light output of low-end trim may vary between
fixturemanufacturersandmodelnumbers.Forbestresults,donotmix
different drivers or ballasts on the same EcoSystem circuit.
5
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive
PowPak Single Zone Control Module with EcoSystem Wireless Lighting Control
3691103d 6 12.21.18
Dimensions
Dimensionsareshownas:in(mm)
3.42
(87)
2.82
(72)
3.94
(100)
Wireless Range Diagram
30 ft (9 m)
maximum
Radio Powr Savr
Occupancy
Sensor
Pico
Remote
Control
PowPak
Control Module
Install in center of room
tomaximizeRFcoverage.
PowPak
Control
Module
Lutron, )Lutron, PowPak, Clear Connect, Vive, Radio Powr Savr, and Pico
are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the
USand/orothercountries.
App Store is a service mark of Apple Inc.
Google Play is a trademark of Google Inc.
iOSisaregisteredtrademarkofCiscointheU.S.andothercountriesandis
used under license.
Android is a trademark of Google Inc.
Wi-Fi is a registered trademark of Wi-Fi Alliance
Note: Wireless sensors and controls must be located within
30ft (9m) of the associated control module.
• Metalceilinggridsmusthavea>0.12in(3mm)gapofnon-
metalmaterialwhichextendstheentirelengthofthetileonat
least one edge. This is often achieved by foam spacers that
are used to prevent tile-to-tile rattling.
• Metalceilinggridswhicharecontinuous(withnogap)or
those that are interlocked, must have a total surface area
that is less than 900 ft
2
(81m
2
) for each section. The overall
space can be larger as long as there are non-metal sections
bordering or intersecting the metal sections.
1.25
(32)
0.5in(21mm)trade-size
knockout opening
6