R
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Stanza® Plug-In Dimming Module Wireless Lighting Control
369-307a 2 08.25.10
Specifi cations
Standards
• UL, CUL listed
• FCC approved. Complies with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. IC
approved to equivalent RF standards.
• NOM listed (Q4 2010)
Power / Performance
• Operating voltage: 120 V~ 50/60 Hz
• Typical power consumption: 0.3 W (typical test condi-
tions = load off, night light mode enabled)
• Always use a bulb that remains within the manufactur-
ers wattage rating of the table or fl oor lamp
• This device is NOT an extension cord and should not
be used for any load other than lighting loads
Control Load Type Min. Load Max. Total Load
SZ-3PD-1
SZ-3PD-3
I
H
Incandescent, Halogen 10 W 300 W
MLV 10 W / VA 200 W / 300 VA
CFL, Fluorescent, ELV
(Switching Mode Only)
10 W 300 W
Environment
• Ambient operating temperature:
32 – 104 ˚F (0 – 40 ˚C)
• Maximum 90% non-condensing relative humidity
• Indoor use only
Warranty
• 1-year limited warranty standard. 2-year parts and la-
bor warranty, with 8-year pro-rated parts replacement
on systems that include factory startup.
For more information: www.lutron.com/TechnicalDoc-
umentLibrary/Warranty_CommercialSystems.pdf
Available Colors
• Snow (SW)
• Midnight (MN)
System Communication and Capacity
• Communicates at 434 MHz through Clear Connect
TM
RF Technology for reliable wireless communication
with other Stanza system components
• Multiple RF channels and thousands of system
addresses prevent interference between systems
• Each plug-in dimming module counts as 1 toward
the basic system maximum of 31 RF devices.
• Consult factory for availability within systems of
>31 RF devices or that require RS232 or Ethernet
integration.
System Communication Notes
• Stanza RF devices must be located within
30 ft (9 m) of a Stanza RF device configured as a
repeater. Multiple devices configured as repeaters
may be necessary to provide adequate coverage.
• Any Stanza RF device can be configured as a
repeater.
• A total of 5 devices maximum can be configured as
repeaters.
• Devices configured as repeaters must be within
30 ft (9 m) of another device configured as a
repeater.
• Stanza lighting controls cannot be controlled
wirelessly and Stanza keypads will not function until
they are addressed and programmed.
