Fillable 369-282 Energi Savr Node Programming Interface Spec Submittal Part #369282c

Fill Online, Printable, Fillable, Blank 369-282 Energi Savr Node Programming Interface Spec Submittal Part #369282c Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369-282 Energi Savr Node Programming Interface Spec Submittal Part #369282c

On average this form takes 11 minutes to complete

The 369-282 Energi Savr Node Programming Interface Spec Submittal Part #369282c form is 6 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 42 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr NodeTM QSE-CI-AP-D Programming Interface
369282d 1 04.01.16
Energi Savr NodeTM Programming Interface
The QSE-CI-AP-D is a programming interface designed to
be used with Energi Savr Node
TM units. It is compatible with
the entire Energi Savr Node
TM product family (models
starting with QSN- and QSNE-), and works with an intuitive
application for the Apple iPhone or iPod touch mobile digital
devices.
Features
• Program all Energi Savr Node
TM modules connected to the
same QS link as the Energi Savr Node
TM Programming
Interface using the Energi Savr Node
TM app on the Apple
iPhone or iPod touch mobile digital devices.
• A system is defined as all devices connected on a single
QS link. For installations with multiple QS links, one Energi
Savr Node
TM Programming Interface is required for every
QS link.
• Powered by the QS link, line voltage not required.
• Install using one of the three following methods:
1. DIN rail
2. Surface mount
3. Junction box
Requirements
• The Energi Savr Node
TM Programming Interface is powered
by the QS link, and consumes 2 power draw units. For
complete information, see "Power Draw Units on the QS
Link" Lutron
® P/N 369405
System Example
Apple, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
Unit shown at actual size
Energi Savr
Node
TM Unit
Energi Savr
NodeTM Unit
Energi Savr
NodeTM Unit
Energi Savr
Node
TM
Programming
Interface
Dedicated
Ethernet
Connection
for Energi Savr
Node
TM Units
Wireless Router
(by others)
Apple iPod touch
or iPhone mobile
digital device
QS Link
QS Link
QSM QSM QSM
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr NodeTM QSE-CI-AP-D Programming Interface
369282d 2 04.01.16
Specifications
Power
• SELV / PELV / NEC
® Class 2
• Operating voltage: 24–36 V- 40 mA
• Consumes two (2) power draw units on the QS link.
Refer to the QS Link Power Draw Units specification
submittal (Lutron
® P/N369405) for more information
concerning Power Draw Units.
Standards
• CE Certified
• Lutron
® Quality Systems registered to ISO 9001.2000
• NOM Compliant
Environment
• Ambient Temperature Operating Range: 32 ºF to 140 ºF
(0 ºC to 60 ºC)
• Relative humidity: less than 90% non-condensing
• For indoor use only
Terminals
• Ethernet port
• QS Link Wiring: 22 AWG to 12 AWG (0.5 mm
2
to 4.0 mm
2
)
Mounting
• DIN rail - occupies three DIN rail mount spaces at
2.125in (53 mm) wide
• Surface mount
• Junction box
Programming Requirements
• An Apple iPod touch or iPhone mobile digital device
with the Energi Savr Node
TM app is required for
programming Energi Savr Node
TM units.
• The Energi Savr Node
TM app for Apple iPod touch or
iPhone is used to program the Energi Savr Node
TM
unit in installations requiring an Energi Savr Node
TM
Programming Interface for commissioning. The Energi
Savr Node
TM app is available from the iTunes Store
online marketplace.
• The Energi Savr Node
TM app cannot be used to
program the Energi Savr Node
TM units when installed as
part of a Quantum
® system.
• The Apple iPod touch or iPhone communicates with the
Energi Savr Node
TM unit via a WiFi router (not included).
• See “Programming Options” section for further
information.
Ethernet Connection
• Standard CAT5 (or better) cable connects the
QSE-CI-AP-D interface to a wireless router.
• Supports MDI / MDIX auto-crossover (no crossover
cable needed).
• Total cable length must be 327 ft (100 m) or less.
• Ethernet network and cable provided by others.
QS Link Limits
• Each Energi Savr Node
TM Programming Interface
counts as 1 device towards the 100 device QS link
limit.
• QS communication link uses SELV / PELV / NEC
®
Class2 wiring. Follow all local and national electrical
codes when installing SELV / PELV / NEC
® Class 2
wiring with line voltage wiring.
• The total length of the QS link must not exceed
2000ft (610m). See table below.
Table 1: QS Link Wiring Options
QS Link Wiring
Length
Wire Gauge Lutron® Cable Part Number
Less than 500ft
(153 m)
Power (terminals 1 and 2)
1 pair 18 AWG (1.0 mm
2
)
GRX-CBL-346S (non-plenum)
GRX-PCBL-346S (plenum)
Data (terminals 3 and 4)
1 twisted, shielded pair
22AWG (0.5 mm
2
)
Up to 2000 ft
(610 m)
Power (terminals 1 and 2)
1 pair 12 AWG (4.0 mm
2
)
GRX-CBL-46L (non-plenum)
GRX-PCBL-46L (plenum)
Data (terminals 3 and 4)
1 twisted, shielded pair
22AWG (0.5 mm2)
QS Link Terminal Connections
• Each QS link terminal can accept only two 18AWG
(1.0 mm
2
) wires. Two 12 AWG (4.0 mm
2
) conductors
will not fit. Connect as shown below using appropriate
wire connectors.
Apple, iPhone, iPod touch, and iTunes Store are trademarks of Apple Inc., registered in the
U.S. and other countries.
12AWG
(4.0mm
2
)
18AWG
(1.0mm
2
)
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr NodeTM QSE-CI-AP-D Programming Interface
369282d 3 04.01.16
Powering the QSE-CI-AP-D
• The QSE-CI-AP-D consumes 2 power draw units on the QS link and counts as one device toward the 100 device
QSlink limit.
• The QSE-CI-AP-D may also be powered by a QS Link power supply (QSPS-P1-1-50, QSPS-P2-1-50, or
QSPS-P3-1-50) or a QS shade panel power supply (QSPS-P2-10-60 for 230 V~, or QSPS-P1-10-60 for 120 V~).
Wiring Example: Using a QS Link Power Supply
ESN = Energi Savr Node
TM Unit
ESN 1
120-277 V~ UL Products 230 V~ CE Products
ESN 1
ESN 2
ESN 2
ESN
Programming
Interface
ESN
Programming
Interface
The ESN
Programming
Interface is
powered by
ESN 1 only.
Terminal 2
terminates
at the ESN
Programming
Interface.
3
2.4 in
(60 mm)
3.5 in
(88 mm)
2.1 in
(53 mm)
2.1 in
(53 mm)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr NodeTM QSE-CI-AP-D Programming Interface
369282d 4 04.01.16
Mechanical Dimensions (using DIN rail only)
4
0.06 in
(1.52 mm)
8.00 in
(203 mm)
8.00 in
(203 mm)
4.06 in
(103 mm)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr NodeTM QSE-CI-AP-D Programming Interface
369282d 5 04.01.16
Mechanical Dimensions (using metal enclosure LUT-8X8-ENC)
5
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Energi Savr NodeTM QSE-CI-AP-D Programming Interface
369282d 6 04.01.16
Programming with Apple iPod touch or iPhone
• Use the intuitive programming application for the Apple iPod touch or iPhone to program systems with multiple
Energi Savr Node
TM units and QS Sensor Modules (QSMs) on the QS link.
Features unlocked by programming application and interface
• Sensors and controls can be shared between Energi Savr Node
TM units on the QS link (SELV / PELV / NEC®
Class 2 Dry Contact Switch inputs cannot be shared between Energi Savr Node
TM units on the QS link)
• Associate multiple QSMs to one or more Energi Savr Node
TM units on QS link
Associate up to 100 of each type of input to multiple Energi Savr Node
TM units connected to a
single QS link.
• Inputs can be connected to Energi Savr Node
TM units or QSMs
Link input limits:
• 100 wired or wireless occupancy sensors on the QS link
• 100 wired or wireless daylight sensors on the QS link
• 100 wired wallstations or Pico
® wireless controllers on the QS link
• 16 wired or wireless daylight sensors on an EcoSystem
® link
Apple, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
NOTE: Energi Savr NodeTM Programming Interface
units are not designed to exist on an open network.
Connection to an open network could result in re-
duced performance and Ethernet connectivity issues.
Energi Savr
Node
TM Unit
Energi Savr
NodeTM Unit
Energi Savr
NodeTM Unit
Energi Savr
Node
TM
Programming
Interface
Dedicated
Ethernet
Connection
for Energi Savr
Node
TM Units
Wireless Router
(by others)
Apple iPod touch
or iPhone mobile
digital device
QS Link
QS Link
QSM QSM QSM
6
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369-282 Energi Savr Node Programming Interface Spec Submittal Part 369282c

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 6 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document