Fillable 369-143 Maestro Wireless Dimmers and Switches Spec Submittal Part # 369143

Fill Online, Printable, Fillable, Blank 369-143 Maestro Wireless Dimmers and Switches Spec Submittal Part # 369143 Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369-143 Maestro Wireless Dimmers and Switches Spec Submittal Part # 369143

On average this form takes 32 minutes to complete

The 369-143 Maestro Wireless Dimmers and Switches Spec Submittal Part # 369143 form is 24 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 126 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 1 01.06.17
Maestro Wireless Dimmers and
Switches
The Maestro Wireless solution incorporates Maestro
Wireless load controls, wireless sensors, and
wireless remote controls, which provide a system
that delivers energy savings, convenience, and ease
of installation.
Maestro Wireless dimmers and switches use Lutron
patented Clear Connect RF Technology, which
enables wireless communication with
RadioPowrSavr sensors and Pico wireless controls
for light control and general switched loads.
Features
• The Maestro Wireless solution provides dimming/
switching of multiple load types, occupancy/vacancy
sensing, daylight harvesting, and high-end trim.
• Lutron patented Clear Connect RF Technology works
through walls and floors.
• Incorporates advanced features such as fade
ON/fade OFF, high-end trim, and rapid full-ON.
• Controls include Front Accessible Service Switch
(FASS) for safe lamp replacement.
• Two-wire dimmers and switches available for retrofit
applications.
• Power failure memory: If power is interrupted, the
control will return to its previously set level prior to
interruption.
Receiving Devices
Maestro Wireless Controls
Neutral and Non-Neutral
Dimmers
Neutral and Non-Neutral
Switches
Lamp Dimmers Plug-In Modules
Transmitting Devices
Radio Powr Savr Sensors
Pico Wireless Controls
Ceiling-Mounted
Occupancy and
Vacancy Sensors
Wall-Mounted
Occupancy and
Vacancy Sensors
Daylight Sensors
1
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 2 01.06.17
Maestro Wireless Dimmers
Models Available
Dimmers
CFL / LED/Halogen / Incandescent / Magnetic Low-Voltage
MRF2-6CL-XX 150 W CFL / LED Dimmer;
600 W / 600 VA Incandescent / MLV Dimmer 120 V~
MRF2-6MLV-XX 600 W / 600 VA Incandescent / MLV Dimmer 120 V~
MRF2-6ND-120-XX
1, 2
600 W / 600 VA Spec-Grade Neutral wire Dimmer 120 V~
MRF2-10D-120 -X X
2
1000 W /1000 VA Spec-Grade Dimmer 120 V~
3-Wire Fluorescent
MRF2-F6AN-DV-XX
1, 2
6 A 3-wire Fluorescent Spec-Grade Neutral-Wire Dimmer
120–277 V~
Electronic Low-Voltage Dimmer
MRF2-6ELV-120-XX
1
600 W ELV Dimmer 120 V~
Companion Dimmers
Claro Gloss Finishes
MA-R-XX
2
Companion Dimmer 120 V~
MA-R-277-XX
2
Companion Dimmer 277 V~
Satin Colors Satin Finishes
MSC-AD-XX Companion Dimmer 120 V~
MSC-AD-277-XX Companion Dimmer 277 V~
NOTE: “XX” in the model number represents color/finish code.
1
Neutral wire required
2
BAA-compliant model numbers available. Add a “U” prefix to the model number.
Dimmer
Companion Dimmer
2
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 3 01.06.17
Ganging and Derating
When combining controls in the same wallbox, derating is required (see Load Type and Capacity tables). Only
MRF2-8ANS controls have fins that need to be removed for multigang installations. No other controls have fins,
but they must still be derated in multigang installations.
Dimmer Load Type and Capacity
Neutral Required
Do not remove outside fins on ends of ganged controls
(shaded areas below)
A B B B C B
Control Voltage Load Type Minimum Load
Maximum Load
A: Not Ganged B: End of Gang C: Middle of Gang
MRF2-6ND-120
1,2,3
120 V~
Incandescent 25 W 600 W 500 W 400 W
MLV
2
25 W / VA 450 W / 600 VA 400 W / 500 VA 300 W / 400 VA
MRF2-6ELV
1,2
120 V~ ELV
2
5 W 600 W 500 W 400 W
MRF2-F6AN-DV
1,3
120 – 277 V~ Lighting 1 ballast 0.05 A 6 A 5 A 3 A
No Neutral Required
A B B B C B
Control Voltage Load Type Minimum Load
Maximum Load
A: Not Ganged B: End of Gang C: Middle of Gang
MRF2-6CL
1,2
120 V~
CFL/LED, Incandescent 50 W (see lamp list) See Mixing Lamp Types, page 4
MLV
2
50 W / VA 450 W / 600 VA 400 W / 500 VA 300 W / 400 VA
MRF2-6MLV
1,2
120 V~ MLV
2
50 VA 450 W / 600 VA 400 W / 500 VA 300 W / 400 VA
MRF2-10 D-120
1,2,3
120 V~
Incandescent 50 W 1000 W 800 W 650 W
MLV
2
50 W / VA 800 W /1000 VA 600 W / 800 VA 500 W / 650 VA
Note: do not mix ELV and MLV load types on a single control.
1
Dimmer Load Type:
• MRF2-6ND-120 is designed for use with permanently-installed incandescent, magnetic low-voltage, or tungsten halogen only. Can control Power
Modules (PHPM-PA-DV, PHPM-3F-DV-WH, PHPM-WBX-DV-WH, and GRX-TVI) and legacy interfaces Hi-Power 2•4•6 Boosters (HP-2, HP-4, HP-6).
• MRF2-6MLV and MRF2-10D-120 are designed for use with permanently-installed incandescent, magnetic low-voltage, or tungsten halogen only.
• MRF2-6ELV is designed for use with permanently-installed electronic low-voltage, incandescent, or tungsten/halogen only. Do not install dimmers to
control receptacles or motor-operated appliances.
• MRF2-F6AN-DV is designed for use with permanently installed 3-wire line voltage control fluorescent ballasts or LED drivers only (Hi-lume, Hi-lume
Compact SE, Eco-10, and EcoSystem). Can control Power Modules (PHPM-PA-DV, PHPM-3F-DV-WH, PHPM-WBX-DV-WH, and GRX-TVI).
• MRF2-6CL is designed for use with permanently-installed incandescent, CFL, LED, magnetic low-voltage, or tungsten halogen only.
2
Low-Voltage Applications:
• Use MRF2-6ND-120, MRF2-6MLV, MRF2-6CL, and MRF2-10D-120 with magnetic (core and coil) low-voltage transformers only. Not for use with
electronic (solid-state) low-voltage transformers.
• Use MRF2-6ELV with electronic (solid-state) low-voltage transformers only. Operation of a low-voltage circuit with lamps inoperative or removed may result
in transformer overheating and premature failure. Lutron strongly recommends the following:
– Do not operate low-voltage circuits without operative lamps in place.
– Replace burned-out lamps as quickly as possible.
– Use transformers that incorporate thermal protection or fused transformer primary windings to prevent transformer failure due to overcurrent.
• See Application Note #559 for dimming low voltage LEDs.
3
BAA-compliant model numbers available. Add a “U” prefix to the model number.
3
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 4 01.06.17
Dimmer Load Type and Capacity (continued)
Mixing Lamp Types
Mixing lamp types (using a
combination of CFL/LED, and
Incandescent/Halogen bulbs) and
ganging with other dimmers or
electronic switches may reduce
maximum wattage, as shown.
Example: If fins from one side of
dimmer are removed and you have
two 24 W bulbs installed (total CFL
Wattage = 48W), you may add up
to 300W of incandescent or halogen
lighting.
Do not remove outside fins on ends of ganged controls
(shaded areas below)
A B B B C B
Total CFL/LED Wattage
Total Incandescent/Halogen Wattage
A: Not Ganged B: End of Gang C: Middle of Gang
MRF2-6CL
0 W + 50 W–600 W Or 50 W–500 W Or 50 W–400 W
1 W – 25 W + 0 W–500 W Or 0 W–400 W Or 0 W–300 W
26 W – 50 W + 0 W–400 W Or 0 W–300 W Or 0 W–200 W
51 W – 75 W + 0 W–300 W Or 0 W–200 W Or 0 W–100 W
76 W – 100 W + 0 W–200 W Or 0 W–100 W Or 0 W–50 W
101 W – 125 W + 0 W–100 W Or 0 W–50 W Or 0 W
126 W – 150 W + 0 W Or 0 W Or 0 W
Maximum Load
Total MLV Wattage 450 W / 600 VA 400 W / 500 VA 300 W / 400 VA
Example
If a dimmer is installed in location “B” above and there are two 24 W CFL bulbs installed (Total CFL
Wattage = 48 W), you may add up to 300W of incandescent or halogen lighting.
4
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 5 01.06.17
Maestro Wireless Switches
Models Available
Switches
Lighting and motor loads
MRF2-6ANS-XX
1
6 A Lighting/3 A Fan (1/10 HP motor), Electronic Switch
120V~
MRF2-8ANS-120-XX
1, 2
8 A Lighting, 5.8 A Fan (1/4 HP motor), Spec-Grade
Electronic Switch 120 V~
MRF2-8S-DV-XX
2, 3
8 A Lighting, 3 A Fan (1/10 HP motor, 120 V~ only),
Spec-Grade Electronic Switch 120–277 V~, no neutral wire
required
Companion Switches
Claro Gloss Finishes
MA-AS-XX
2
Companion Switch 120 V~
MA-AS-277-XX
2
Companion Switch 277 V~
Satin Colors Satin Finishes
MSC-AS-XX Companion Switch 120 V~
MSC-AS-277-XX Companion Switch 277 V~
NOTE: “XX” in the model number represents color/finish code.
1
Neutral wire required
2
BAA-compliant model numbers available. Add a “U” prefix to the model number
3
May require LUT-MLC (included with MRF2-8S-DV models) to ensure proper function with low-wattage load
types. See page 12 for details.
Switch
Companion Switch
5
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 6 01.06.17
Switch Load Type and Capacity
Neutral Required
Do not remove outside fins on ends of ganged controls
(shaded areas below)
A B B B C B
Control Voltage Load Type Minimum Load
Maximum Load
A: Not Ganged B: End of Gang C: Middle of Gang
MRF2-8ANS-120
1,2,5
120 V~
Lighting 25 W 8 A 6.5 A 5 A
Fan Motor 0.2 A 1/4 HP (5.8 A) 1/4 HP (5.8 A) 1/6 HP (4.4 A)
MRF2-6ANS
1
120 V~
Lighting 25 W 6 A 5 A 3.5 A
Fan Motor 0.2 A 1/10 HP (3 A) 1/10 HP (3 A) 1/10 HP (3 A)
No Neutral Required
A B B B C B
Control Voltage Load Type Minimum Load
Maximum Load
A: Not Ganged B: End of Gang C: Middle of Gang
MRF2-8S-DV
1,5
120 – 277 V~ Incandescent/Halogen 25 W 8 A 8 A / 7 A
4
7 A
120 – 277 V~ Fluorescent/LED/CFL 40 W (LUT-MLC)
3
8 A 8 A / 7 A
4
7 A
120 V~ Fan Motor 0.4 A 1/10 HP (3 A) 1/10 HP (3 A) 1/10 HP (3 A)
1
Switch Load Type:
• MRF2-8ANS-120 is designed for use with permanently-installed lighting loads and with fan motor loads up to 1/4 HP (5.8 A).
• MRF2-6ANS is designed for use with permanently-installed lighting loads and with fan motor loads up to 1/10 HP (3 A).
• MRF2-8S-DV is designed for use with permanently-installed lighting loads and with fan motor loads up to 1/10 HP (3 A, 120 V~ only).
2
For loads larger than 8 A (120 V~), the MRF2-8ANS-120 switch can be used with the PHPM-SW-DV-WH power booster.
3
The LUT-MLC ensures proper function with low-wattage fluorescent, CFL, and LED load types. See page 12 for details.
4
Maximum load for double-gang application is 8 A. Triple-gang application derates maximum load to 7 A.
5
BAA-compliant model numbers available. Add a “U” prefix to the model number.
6
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 7 01.06.17
Specifications
Regulatory Approvals
• UL
® Listed.
• cUL Listed (MRF2-6CL only).
• CSA Certified (except for MRF2-6CL).
• FCC Approved. Complies with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
• Industry Canada Certified.
Power
Operating voltage:
• 120 V~ 50/60 Hz (all models)
• 277 V~ 50/60 Hz (MRF2-8S-DV, MRF2-F6AN-DV)
Key Design Features
Dimmers
• On a single-tap, lights fade UP or DOWN.
• On a double-tap, lights go to full ON.
• When ON, press and hold to engage 20-second fade
to OFF.
• Light levels can be fine-tuned by pressing and
holding the dimming rocker until the desired light
level is reached.
• Two-wire dimmers available.
Switches
• On a single-tap, lights turn ON or OFF.
• Two-wire switches available.
All RF Local Controls
• Tested to withstand electrostatic discharge without
damage or memory loss, in accordance with IEC
61000-4-2.
• Tested to withstand surge voltages without damage
or loss of operation, in accordance with IEEE
C62.41-1991 Recommended Practice on Surge
Voltages in Low-Voltage AC Power Circuits.
• Controls always operate locally and do not require
system control.
• Power failure memory: should power be interrupted,
the control will return to its previously-set level prior
to the interruption when power is restored.
• Uses conventional 3-way and 4-way wiring.
• Multiple location control from Dimmer/Switch and up
to nine Companion Dimmers/Switches.
• Use Lutron Designer (Claro and Satin Colors)
wallplates or designer-style wallplates from other
manufacturers. Wallplates are sold separately.
• Lutron Claro and Satin Colors wallplates snap on
with no visible means of attachment.
• Requires a one-gang U.S. wallbox; 3
1
⁄2 in (89mm)
deep recommended, 2
1
⁄4 in (57 mm) deep minimum.
• Green indicator lights.
System Communications and Capacity
• Maestro Wireless controls communicate with the
Pico wireless controls and Radio Power Savr sensors
through radio frequency (RF).
• Maestro Wireless local controls must be located
within 60 ft (18 m) line-of-sight or 30 ft (9 m) through
walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located
within 100 ft (30 m) line-of-sight or 30 ft (9 m)
through walls, of a Pico wireless control.
• Up to ten Maestro Wireless controls can be
configured to work together.
Environment
• Ambient operating temperature: 32 °F to 104 °F
(0°C to 40 °C), 0%–90% humidity, non-condensing.
Indoor use only.
7
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 8 01.06.17
Wallplate Adapter / Wallplate purchased separately
Wallplate Adapter Wallplate
Wallbox
Control
Adapter Mounting Screws
Control Mounting Screws
Mounting
Dimensions
All dimensions are shown as: in (mm)
Side View
5/16
(8)
1
1
⁄8
(30)
Front View
4
11
⁄16
(119)
2
15
⁄16
(75)
8
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 9 01.06.17
Operation
Status LEDs
Indicate light level; glow softly as
night light when light is OFF
Dimming Rocker
Press to brighten
Press to dim
Tapswitch
Tap ON / OFF;
Double-tap: lights go to full ON
FASS
Front Accessible Service Switch
FASS
Front Accessible Service Switch
FASS Front Accessible Service Switch
Important Notice: To service load,
remove power by pulling the FASS out
completely on either the Dimmer / Switch
or Companion Dimmer / Switch. After
servicing load, push the FASS back in fully
to restore power to the control.
Dimmer
Tapswitch
Tap ON / OFF
Switch
Status LED
Indicates load status; glows softly as
night light when light is OFF
9
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 10 01.06.17
1
When using controls in single location installations, tighten the blue terminal without any wires attached. Do not connect the blue terminal to any other wiring or
to ground.
2
Up to nine Maestro Companion Dimmers may be connected to the Maestro Wireless Dimmer. Total blue terminal wire length may be up to 250 ft (76 m).
Wiring Diagrams
Single-Location Dimmer Installation without Neutral
MRF2-6CL, -6MLV, -10D-120
Dimmer
Load
Brass
Black
Hot/Live
Green
Blue
1
Ground
Neutral
120 V~ 60 Hz
Multi-Location Dimmer Installation without Neutral
2
MRF2-6CL, -6MLV, -10D-120 with MA-R / MSC-AD
Companion Dimmer Companion Dimmer Dimmer
BrassBrassBrass
BlackBlackBlack
Hot/Live
GreenGreenGreen
BlueBlueBlue
GroundGroundGround
Neutral
120 V~ 60 Hz
Load
10
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 11 01.06.17
1
When using controls in single location installations, tighten the blue terminal without any wires attached. Do not connect the blue terminal to any other wiring
or to ground.
2
Up to nine Maestro Companion Dimmers / Switches may be connected to the Maestro Wireless Dimmer / Switch. Total blue terminal wire length may be up to
250 ft (76 m).
3
Neutral-wire Dimmers / Switches must be connected on the Load side of a multi-location installation.
Wiring Diagrams (continued)
Multi-Location Dimmer/Switch Installation with Neutral
2,3
MRF2-6ND-120, -6ELV-120 with MA-R/MSC-AD; -6ANS, -8ANS-120 with MA-AS/MSC-AS
Companion
Dimmer/Switch
Companion
Dimmer/Switch Dimmer/Switch
Brass
Silver
BrassBrass
BlackBlackBlack
Hot/Live
GreenGreenGreen
BlueBlueBlue
GroundGroundGround
Neutral
120 V~ 60 Hz
Load
Single-Location Dimmer/Switch Installation with Neutral
MRF2-6ND-120, -6ELV-120, -6ANS, -8ANS-120
Dimmer/Switch
Load
Brass
Black
Silver
Hot/Live
Green
Blue
1
Ground
Neutral
120 V~ 60 Hz
11
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 12 01.06.17
1
A LUT-MLC ensures proper function when low-wattage fluorescent, CFL, or LED loads are used. Install the LUT-MLC inside a load fixture or in a separate
J-box within the circuit.
2
When using controls in single-location installations, tighten the blue terminal without any wires attached. Do not connect the blue terminal to any other wiring
or to ground.
3
Up to nine Maestro Companion Switches may be connected to the Maestro Wireless Switch. Total blue terminal wire length may be up to 250 ft (76 m).
4
Requires MA-AS / MSC-AS for 120 V~ applications, and MA-AS-277 / MSC-AS-277 for 277 V~ applications.
Single-Location Switch Installation with LUT-MLC
1
MRF2-8S-DV
Switch
Load LUT-MLC
1
Brass
Black
Hot/Live
Green
Optional
*
Blue
2
Ground
Neutral
120 V~ 60 Hz
or
277 V~ 60 Hz
Multi-Location Switch Installation with LUT-MLC
1,2,3
MRF2-8S-DV with MA-AS / MA-AS-277 or MSC-AS / MSC-AS-277
4
Companion Switch Companion Switch Switch
BrassBrassBrass
BlackBlackBlack
Hot/Live
GreenGreenGreen
BlueBlueBlue
GroundGroundGround
Neutral
120 V~ 60 Hz
or
277 V~ 60 Hz
Load LUT-MLC
1
Optional
*
Wiring Diagrams (continued)
* Optional Procedure:
Using LUT-MLC with MRF2-8S-DV-XX
• Install MRF2-8S-DV-XX first without LUT-MLC to
see if required. Check for problems with load.
• Problems can occur when low-wattage loads are
used (< 40 W).
• Watch for flickering loads when dimmer is in
electronic OFF state.
• If required, LUT-MLC can be installed between
switched hot and neutral in wallbox if neutral is
present, or in any fixture on the switched circuit.
12
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 13 01.06.17
1
When using controls in single location installations, tighten the blue terminal. Do not connect the blue terminal to any other wiring or to ground.
2
Up to nine Maestro Companion Dimmers may be connected to the Maestro Wireless Dimmer. Total blue terminal wire length may be up to 250 ft (76 m).
3
Neutral-wire Dimmers must be connected on the Load side of a multi-location installation.
4
Requires MA-R / MSC-AD for 120 V~ applications, and MA-R-277 / MSC-AD-277 for 277 V~ applications.
Wiring Diagrams (continued)
Single-Location Fluorescent Dimmer Installation with Neutral
MRF2-F6AN-DV
Dimmer
Lutron
Ballast / Driver
Lutron
Ballast / Driver
Brass
Black
Silver
Hot/Live
Green
Orange
Orange
Orange
White
White
Black
Black
Blue
1
Ground
Neutral
120 V~ 60 Hz
or
277 V~ 60 Hz
Multi-Location Fluorescent Dimmer Installation with Neutral
2,3
MRF2-F6AN-DV with MA-R / MA-R-277 or MSC-AD / MSC-AD-277
4
DimmerCompanion DimmerCompanion Dimmer
Lutron
Ballast / Driver
Lutron
Ballast / Driver
BrassBrassBrass
BlackBlackBlack
Silver
Hot/Live
GreenGreenGreen
Orange
Orange
Orange
White
White
Black
Black
BlueBlueBlue
GroundGroundGround
Neutral
120 V~ 60 Hz
or
277 V~ 60 Hz
13
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 14 01.06.17
1
When using controls in single-location installations, tighten the blue terminal. Do not connect the blue terminal to any other wiring or to ground.
2
Up to nine Maestro Companion Switches may be connected to the Maestro Wireless Switch. Total blue terminal wire length may be up to 250 ft (76 m).
3
Neutral-wire Switches must be connected on the Load side of a multi-location installation.
Wiring Diagrams (continued)
Single-Location Switch Installation with Power Booster Single Feed
MRF2-6ANS, -8ANS-120 with PHPM-SW-DV-WH
Switch
Brass Blue
1
Zone In
Black
Silver
Hot/Live
Switched Hot
Hot/Live
NeutralNeutral
Neutral
Ground
Ground
Green
120 V~ 60 Hz
Load
Multi-Location Switch Installation with Power Booster Single Feed
2,3
MRF2-6ANS, -8ANS-120 with MA-AS / MSC-AS and PHPM-SW-DV-WH
Companion Switch Switch
Brass BlueBlue
Zone In
Black
Silver
Hot/Live
Switched Hot
Hot/Live
Brass
Black
NeutralNeutral
Neutral
Ground
Ground
Green
Ground
Green
120 V~ 60 Hz
Load
14
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 15 01.06.17
Multi-Location Switch Installation with Power Booster Dual Feed
1,2
MRF2-6ANS, -8ANS-120 with MA-AS / MSC-AS and PHPM-SW-DV-WH
Companion Switch Switch
Brass BlueBlue
Zone In
Black
Silver
Hot/Live
Switched Hot
Hot/Live
Brass
Black
NeutralNeutral
Neutral
Neutral
Ground
Ground
Green
Ground
Green
120 V~ 60 Hz
or
277 V~ 60 Hz
120 V~ 60 Hz
Load
Wiring Diagrams (continued)
Single-Location Switch Installation with Power Booster Dual Feed
MRF2-6ANS, -8ANS-120 with PHPM-SW-DV-WH
Switch
Brass Blue
1
Zone In
Black
Silver
Hot/Live
Switched Hot
Hot/Live
NeutralNeutral
Neutral
Neutral
Ground
Ground
Green
120 V~ 60 Hz
or
277 V~ 60 Hz
120 V~ 60 Hz
Load
1
When using controls in single-location installations, tighten the blue terminal. Do not connect the blue terminal to any other wiring or to ground.
2
Up to nine Maestro Companion Switches may be connected to the Maestro Wireless Switch. Total blue terminal wire length may be up to 250 ft (76 m).
3
Neutral-wire Switches must be connected on the Load side of a multi-location installation.
15
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 16 01.06.17
1
When using controls in single location installations, tighten the blue terminal. Do not connect the blue terminal to any other wiring or to ground.
2
Up to nine Maestro Companion Dimmers may be connected to the Maestro Wireless Dimmer. Total blue terminal wire length may be up to 250 ft (76 m).
3
Neutral-wire Dimmers must be connected on the Load side of a multi-location installation.
4
When using a PHPM, tighten the brass (Sw Hot) terminal of the MRF2-F6AN-DV. Do not connect the brass terminal to any other wiring or to ground.
Multi-Location Fluorescent Dimmer Installation with Power Booster Dual Feed
2,3
MRF2-F6AN-DV with MA-R / MSC-AD and PHPM-3F-DV-WH, PHPM-PA-DV-WH, or PHPM-WBX-DV-WH
Companion Dimmer Dimmer
Brass
4
BlueBlue
Zone In
Black
Silver
Hot/Live
Dimmed Hot
Hot/Live
Brass
Black
Neutral
Neutral
Neutral
Ground
Ground
Green
Ground
Green
120 V~ 60 Hz
Load
Orange
Single-Location Fluorescent Dimmer Installation with Power Booster Single Feed
MRF2-F6AN-DV with PHPM-3F-DV-WH, PHPM-PA-DV-WH, or PHPM-WBX-DV-WH
Dimmer
Brass
4
Blue
1
Zone In
Black
Silver
Hot/Live
Dimmed Hot
Hot/Live
NeutralNeutral
Neutral
Ground
Ground
Green
120 V~ 60 Hz
Load
Orange
Wiring Diagrams (continued)
16
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 17 01.06.17
Multi-Location Fluorescent Dimmer Installation with Power Booster Dual Feed
2,3
MRF2-F6AN-DV with MA-R / MSC-AD and PHPM-3F-DV-WH, PHPM-PA-DV-WH, or PHPM-WBX-DV-WH
Companion Dimmer Dimmer
Brass
4
BlueBlue
Zone In
Black
Silver
Hot/Live
Dimmed Hot
Hot/Live
Brass
Black
NeutralNeutral
Neutral
Neutral
Ground
Ground
Green
Ground
Green
120 V~ 60 Hz
or
277 V~ 60 Hz
120 V~ 60 Hz
or
277 V~ 60 Hz
Load
Orange
Single-Location Fluorescent Dimmer Installation with Power Booster Dual Feed
MRF2-F6AN-DV with PHPM-3F-DV-WH, PHPM-PA-DV-WH, or PHPM-WBX-DV-WH
Dimmer
Brass
4
Blue
1
Zone In
Black
Silver
Hot/Live
Dimmed Hot
Hot/Live
NeutralNeutral
Neutral
Neutral
Ground
Ground
Green
120 V~ 60 Hz
or
277 V~ 60 Hz
120 V~ 60 Hz
or
277 V~ 60 Hz
Load
Orange
Wiring Diagrams (continued)
1
When using controls in single location installations, tighten the blue terminal. Do not connect the blue terminal to any other wiring or to ground.
2
Up to nine Maestro Companion Dimmers may be connected to the Maestro Wireless Dimmer. Total blue terminal wire length may be up to 250 ft (76 m).
3
Neutral-wire Dimmers must be connected on the Load side of a multi-location installation.
4
When using a PHPM, tighten the brass (Sw Hot) terminal of the MRF2-F6AN-DV. Do not connect the brass terminal to any other wiring or to ground.
17
RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 18 01.06.17
Colors and Finishes
Gloss Finishes Satin Finishes
Metal Finish
(wallplate only)
Stainless Steel
SS
Taupe
TP
Turquoise
TQ
Plum
PL
Merlot
MR
Terracotta
TC
Sienna
SI
Midnight
MN
Hot
HT
Desert Stone
DS
Eggshell
ES
Biscuit
BI
Snow
SW
Palladium
PD
Greenbriar
GB
Bluestone
BG
Mocha Stone
MS
Goldstone
GS
Stone
ST
Limestone
LS
White
WH
Ivory
IV
Almond
AL
Light Almond
LA
Gray
GR
Brown
BR
Black
BL
• Due to printing limitations, colors
and finishes shown cannot be
guaranteed to perfectly match
actual product colors.
• Color chip keychains are available
for more precise color matching:
Gloss Finishes: DG-CK-1
Satin Finishes: SC-CK-1
When using Stainless Steel wallplates,
it is recommended that you order the
dimmer/switch in Midnight (MN).
Lutron, )Lutron, Claro, Clear Connect, Eco-10, EcoSystem, Hi-lume, Maestro, Maestro Wireless, Pico, Satin Colors, and Tu-Wire are trademarks of Lutron Electronics Co., Inc.,
registered in the U.S. and other countries. Radio Powr Savr, FASS, Hi-lume Compact SE, and Hi-Power 2•4•6 are trademarks of Lutron Electronics Co., Inc.
UL is a trademark of UL LLC.
18
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369-143 Maestro Wireless Dimmers and Switches Spec Submittal Part 369143

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 5 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document