Fillable InternationalseeTouchQS International seeTouch QS Spec Sheet

Fill Online, Printable, Fillable, Blank InternationalseeTouchQS International seeTouch QS Spec Sheet Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

InternationalseeTouchQS International seeTouch QS Spec Sheet

On average this form takes 35 minutes to complete

The InternationalseeTouchQS International seeTouch QS Spec Sheet form is 32 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 140 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 1 08.21.15
®
International
QSWE-2BN-___-___
QSWE-2BI-___-___
2-Button Wallstation
Description
• Often used in entryways to select Scene 1 and Off.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to
find and operate the Wallstation in low light conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Receives up to two contact closure inputs via a
connector on the back of the Wallstation.
Color and Engraving Codes
QSWE-2BN-AW-EGN
(Non-insert version)
LEDs
QSWE-2BI-AW
(Insert version)
Engraving
1
Off
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 2 08.21.15
®
International
QSWE-3BN-___-___
QSWE-3BI-___-___
3-Button Wallstation
Description
• Often used to select scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the Wallstation in low light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Receives up to two contact closure inputs via a
connector on the back of the Wallstation.
Color and Engraving Codes
Engraving
QSWE-3BN-AW-EGN
(Non-insert version)
LEDs
QSWE-3BI-AW
(Insert version)
1
2
Off
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 3 08.21.15
®
International
QSWE-4BN-___-___
QSWE-4BI-___-___
4-Button Wallstation
Description
• Often used to select scenes; often to select between
3 scenes and Off.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the Wallstation in low light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Receives up to two contact closure inputs via a
connector on the back of the Wallstation.
Color and Engraving Codes
QSWE-4BN-AW
(Non-insert version)
LEDs
QSWE-4BI-AW-EGN
(Insert version)
Engraving
1
2
3
Off
3
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 4 08.21.15
®
International
QSWE-5BRLN-___-___
QSWE-5BRLI-___-___
5-Button Wallstation with
Raise/Lower
Description
• Often used to select and adjust scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the Wallstation in low light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Master raise/lower brightens or dims all lighting or
raises/lowers all assigned shades in the last selected
scene or toggled group.
• Shade control features (E01 engraving):
- Can control Sivoia® QS Window Treatments.
- Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
- Three (3) programmable preset buttons.
• Receives up to two contact closure inputs via a
connector on the back of the Wallstation.
Color and Engraving Codes
QSWE-5BRLN-AW-EGN
(Non-insert version)
LEDs
QSWE-5BRLI-AW-E01
(Insert version)
Master Raise/Lower
Engraving
Scene
Selection
Buttons
1
2
3
4
Off
Open
Preset 1
Preset 2
Preset 3
Close
4
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 5 08.21.15
®
International
QSWE-5BRLIRN-___-___
QSWE-5BRLIRI-___-___
5-Button Wallstation with
Infrared Receiver and Raise/Lower
Description
• Often used to select and adjust scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the Wallstation in low light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Master raise/lower brightens or dims all lighting or
raises/lowers all assigned shades in the last selected
scene or toggled group.
• Shade control features (E01 engraving):
- Can control Sivoia® QS Window Treatments.
- Also controls shades with wireless IR controllers
SVQ-3PIT, SVQ-OCIT, SVQ-4GD-OCIT, and
SVQ-4S2G-IT.
- Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
- Three (3) programmable preset buttons.
• Receives up to two contact closure inputs via a
connector on the back of the Wallstation.
Color and Engraving Codes
QSWE-5BRLIRN-AW-EGN
(Non-insert version)
LEDs
QSWE-5BRLIRI-AW-E01
(Insert version)
Master
Raise/Lower
IR Window
Scene
Selection
Buttons
1
2
3
4
Off
Engraving
Open
Preset 1
Preset 2
Preset 3
Close
5
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 6 08.21.15
®
International
QSWE-6BRLN-___-___
QSWE-6BRLI-___-___
Dual Wallstation with 3-Button
and 3-Button with Raise/Lower
Description
• Often used to control one or more lighting or window
treatment zones simultaneously.
• Large, rounded buttons are easy to use.
• Backlit buttons with on-button engraving make it
easy to find and operate the Wallstation in low light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the
buttons are pressed.
• Shade control features (E01 engraving):
- Often used to select three different groups of
shades using Open, Close, and Raise/Lower.
- Used to control multiple groups of shades
independently from a single-gang keypad (e.g., a
window with a sheer shade and a blackout shade).
- Can control Sivoia® QS Window Treatments.
- Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
- One (1) programmable preset button.
• Receives up to two contact closure inputs via a
connector on the back of the Wallstation.
Color and Engraving Codes
Engraving
QSWE-6BRLN-AW-E01
(Non-insert version)
LEDs
QSWE-6BRLI-AW-EGN
(Insert version)
Group 1
Group 2
Group 3
1
2
Off
Open
Close
Open
Close
Raise/Lower
Preset
Preset
6
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 7 08.21.15
®
International
QSWE-7BRLN-___-___
QSWE-7BRLI-___-___
7-Button Wallstation with
Raise/Lower
Description
• Often used to select and adjust scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to
find and operate the Wallstation in low light conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Master raise/lower brightens or dims all lighting or
raises/lowers all assigned shades in the last selected
scene or toggled group.
• Functions as two independently programmable
controllers. Left column mimics a 2-button column
and right column mimics a 5-button column.
Wallstation can control two lighting zones, two shade
groups, or one of each. Or can function as one shade
group control where the right keypad controls the
group of shades indicated by the left keypad.
• Shade control features (E01 engraving):
- Used to control multiple groups of shades
independently from a single-gang keypad (e.g., a
window with a sheer shade and a blackout shade).
- Can control Sivoia® QS Window Treatments.
- Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
- Three (3) programmable preset buttons.
• Receives up to two contact closure inputs via a
connector on the back of the Wallstation.
Color and Engraving Codes
QSWE-7BRLN-AW-EGN
(Non-insert version)
LEDs
QSWE-7BRLI-AW-E01
(Insert version)
Master Raise/Lower
Engraving
Scene
Selection
Buttons
1
2
3
4
Off
Open
Preset 1
Preset 2
Preset 3
Close
1
Off
Group 1
Group 2
7
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 8 08.21.15
®
International
QSWE-8BRLN-___-___
QSWE-8BRLI-___-___
8-Button Wallstation with
Raise/Lower
Description
• Often used to select and adjust scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the Wallstation in low light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Master raise/lower brightens or dims all lighting or
raises/lowers all assigned shades in the last selected
scene or toggled group.
• Functions as two independently programmable
controllers. Left column mimics a 3-button column
and right column mimics a 5-button column.
Wallstation can control two lighting zones, two shade
zones, or one of each. Or can function as one shade
group control where the right keypad controls the
group of shades indicated by the left keypad.
• Shade control features (E01 engraving):
- Used to control multiple groups of shades
independently from a single-gang keypad (e.g., a
window with a sheer shade and a blackout shade).
- Can control Sivoia® QS Window Treatments.
- Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
- Three (3) programmable preset buttons.
• Receives up to two contact closure inputs via a
connector on the back of the Wallstation.
Color and Engraving Codes
QSWE-8BRLN-AW-EGN
(Non-insert version)
LEDs
QSWE-8BRLI-AW-E01
(Insert version)
Master Raise/Lower
Engraving
Scene
Selection
Buttons
Open
Preset 1
Preset 2
Preset 3
Close
1
2
Off
Open
Preset 1
Preset 2
Preset 3
Close
Group 1
Group 2
Group 3
8
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 9 08.21.15
®
International
QSWE-8BRLIRN-___-___
QSWE-8BRLIRI-___-___
8-Button Wallstation with
Infrared Receiver and Raise/Lower
Description
• Often used to select and adjust scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the Wallstation in low light
conditions.
• Optional button engraving is angled up to the eye
for easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the
buttons are pressed.
• Master raise/lower brightens or dims all lighting
or raises/lowers all assigned shades in the last
selected scene or toggled group.
• Functions as two independently programmable
controllers when engraving or no engraving is
ordered. Left column mimics a 3-button column
and right column mimics a 5-button column.
Wallstation can control two lighting zones, two
shade zones, or one of each. Or can function as
one shade group control where the right keypad
controls the group of shades indicated by the left
keypad.
• Shade control features (E01 engraving):
- Used to control multiple groups of shades
independently from a single-gang keypad (e.g., a
window with a sheer shade and a blackout shade).
- Can control Sivoia® QS Window Treatments.
- Also controls shades with wireless IR controllers
SVQ-3PIT, SVQ-OCIT, SVQ-4GD-OCIT, and
SVQ-4S2G-IT.
- Pressing the Open (or Close) button once will
cause the window treatments to move to their
fully open (or closed) position. Tap any button
(regardless of function) to stop a shade that is in
motion.
- Three (3) programmable preset buttons.
• Receives up to two contact closure inputs via a
connector on the back of the Wallstation.
Color and Engraving Codes
QSWE-8BRLIRN-AW-EGN
(Non-insert version)
LEDs
QSWE-8BRLIRI-AW-E01
(Insert version)
Master Raise/
Lower
IR Window
Scene
Selection
Buttons
Engraving
Open
Preset 1
Preset 2
Preset 3
Close
1
2
Off
Open
Preset 1
Preset 2
Preset 3
Close
Group 1
Group 2
Group 3
9
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 10 08.21.15
®
International
QSWE-10BRLN-___-___
QSWE-10BRLI-___-___
10-Button Wallstation with
Raise/Lower
Description
• Often used to select and adjust scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the Wallstation in low light
conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons
are pressed.
• Master raise/lower brightens or dims all lighting or
raises/lowers all assigned shades in the last selected
scene or toggled group.
• Functions as two independently programmable
controllers when engraving or no engraving is
ordered. Left column mimics a 5-button column and
right column mimics a 5-button column. Wallstation
can control two lighting zones, two shade zones, or
one of each.
• Receives up to two contact closure inputs via a
connector on the back of the Wallstation.
• Shade control features (E01 engraving):
- Can control Sivoia® QS Window Treatments.
- Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
- Three (3) programmable preset buttons.
Color and Engraving Codes
QSWE-10BRLN-AW-EGN
(Non-insert version)
LEDs
QSWE-10BRLI-AW-E01
(Insert version)
Master Raise/Lower
Engraving
Scene
Selection
Buttons
1
2
3
4
Off
Open
Preset 1
Preset 2
Preset 3
Close
6
7
8
9
5
1
2
3
4
Off
10
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 11 08.21.15
®
International
Specifications
Power Input (Control Link Terminal 2)
SELV / PELV. Operating voltage: 24–36 V 30 mA
Key Design Features
• Field-changeable button and faceplate assemblies allow easy
customization.
• Meets IEC 801-2. Tested to withstand 15 kV electrostatic discharge
without damage or memory loss.
• Faceplate snaps on with no visible means of attachment.
• Available as an “insert” style control for multiganging.
• Use Faceplate Replacement Kits to change color, button configuration, or
engraving, or to convert between non-insert and insert configurations.
• Faceplate Replacement Kits may also be used to convert between
non-insert and insert configurations.
System Communications and Capacity
• SELV / PELV wiring connects Wallstations to other devices on the QS Link.
• A QS system can have up to 100 devices and 100 zones; seeTouch® QS
wallstations each count as 1 device and 0 zones on the QS Link.
• A seeTouch® QS wallstation consumes 1 power draw unit (PDU) on the QS
link. For complete information, see “Power Draw Units on the QS Link,”
Lutron PN 369405.
Terminals
Accept up to two 1.0 mm
2
(18 AWG).
Environment
0 to 40 °C (32 to 104 °F). Relative humidity less than 90% non-condensing.
Compatibility
seeTouch
® QS keypads are compatible with GRAFIK Eye® QS,
Energi Savr Node
TM, and Quantum®.
Note: Energi Savr Node
TM does not support shade type wallstations.
Mounting
Typical backbox dimensions:
75 mm (3 in) wide,
75 mm (3 in) tall,
35 mm (1.4 in) deep.
Dimensions
Front View
Side View
Back View
4 3 2 1
C B A
QS Link
Connector
Sensor/
Contact
Closure
Input
Connector
86 mm
(3.5 in)
86 mm
(3.5 in)
54 mm
(2.1 in)
28 mm (1.1 in)
11
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 12 08.21.15
®
International
Available Control Types
International seeTouch® wallstations are available in three types:
Lights Only
Lights and Shades
Shades Only
Lights Only
• Controls only lights.
• Has a programmable column type (choose from the list on the following pages).
• Engraving options: General (EGN) and Non-Standard (NST).
Lights and Shades
• Left column controls only lights and has a programmable column type
(choose from the list on the following pages).
• Right column controls only shades and has a programmable column type
(choose from the list on the following pages).
• Models with preset buttons have programmable preset levels.
• Engraving options: General (EGN) and Non-Standard (NST);
Standard (E01) available for model QSWE-10BRLI-WH-E01 only.
Shades Only
• Controls only shades.
• Has a programmable column type (choose from the list on the following pages).
• Models with preset buttons have programmable preset levels.
• Engraving options: Standard (E01) and Non-Standard (NST).
QSWE-4BI-AW-EGN
shown
QSWE-7BRLI-AW-E01
shown
QSWE-10BRLI-AW-E01
shown
1
2
3
1
Open
Open
Group 1
3
Preset 1
Preset 1
Preset 2
Preset 2
2
4
Off
Group 2
Off
Preset 3
Preset 3
Close
Close
12
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 13 08.21.15
®
International
Available Column Types
Scene (with Off)
• Controls preprogrammed scenes on one or more scene controllers (such as a GRAFIK Eye® QS, or an
area on an ESN).
• Buttons within a column control the same scene controller(s) (different buttons within a column cannot control
different scene controllers).
• The scene recalled by the first button in a column is programmable, subsequent buttons recall the next numerical
scene, and the last button always recalls Scene Off.
• A 1-button scene Wallstation will always toggle between the assigned scene and Scene Off.
Scene (without OFF)
• Identical function to Scene with Off, except the last button in a column recalls the next consecutive scene, not
Scene Off.
Zone Toggle
• Buttons toggle a zone or group of zones between programmable preset values and Off (where all zones are Off).
• Each zone can be programmed to a different value.
• Each button can be individually programmed to a different load or group of loads.
Partition
• Allows the user to assign individual buttons of a column to different scene controllers (areas).
• One button press (button LED lights) indicates an open partition within the space so that devices programmed to
that button talk to each other in both directions.
• A second button press (button LED goes off) indicates a closed partition within the space so that devices
programmed to that button function independently.
2B Partition (2-button Wallstation only)
• Identical function to Partition, except that there are two buttons.
• A top button press indicates an open partition; a bottom button press indicates a closed partition.
2B Fine Tune (2-button Wallstation only)
• Buttons function as raise and lower buttons for assigned zones.
• A button tap will raise/lower the level of assigned zones by 1 percent.
• Press and holding the buttons smoothly raises to high end or smoothly lowers to low end.
2B Sequence (2-button Wallstation only)
• All assigned scene controllers continuously cycle through either Scenes 1–4 or Scenes 5–16 using the
programmed fade times for each scene.
• Useful for spaces that desire dynamic lighting, such as decorative lighting or displays in retail stores.
(continued)
13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 14 08.21.15
®
International
Available Column Types (continued)
2B Panic (2-button Wallstation only)
• Button press causes all assigned scene controllers to go to Scene 16.
• Temporarily disables all button presses and ignores scene or zone level changes.
2B Timeclock (2-button Wallstation only)
• Allows the user to enable or disable the timeclock on a GRAFIK Eye® QS.
• A top button press enables the timeclock; a bottom button press disables the timeclock.
Shade
• Wallstation must have more than 1 button.
• Raise/Lower buttons are recommended for programming.
• The top button becomes the Open button; the bottom button becomes the Close button for associated
Sivoia
® QS shades or third-party AC shades.
• For keypads with more than two buttons, the middle buttons are programmable Preset buttons.
Shade Group
• Available only on a multi-column keypad where another column is a shade column.
• Allows the shade column to operate as multiple independent keypads (one per group).
• The shade group column selects which independent keypad is currently active (indicated by the group button
whose LED is lit).
Notes
• Except where noted, control types linked to a GRAFIK Eye® QS can be changed using the GRAFIK Eye®
programming menu (e.g., control programmed as lights only can be changed to shades only).
• Standard (NST) programming can be acquired through a GRAFIK Eye® QS, Energi Savr NodeTM, or Quantum®
system. Otherwise, please reference Application Note 048428, “Wired seeTouch
® QS: Advanced Programming
Mode”.
14
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 15 08.21.15
®
International
Color/Finish Codes
Satin Colors® Matte Finishes
Available with Insert (I)
style controls only.
Argentum AR
Mica MC
Arctic white AW
Architectural Metal Finishes
With black plastic buttons (standard).
Bright Brass BB
Bright Chrome BC
Bright Nickel BN
Satin Brass SB
Satin Chrome SC
Satin Nickel SN
Special Metal Finishes
Antique Brass QB
Antique Bronze QZ
Gold Plated AU
* Note: Some Satin Colors® units ship with
different color buttons. For more
information, please visit the seeTouch®
website at
www.lutron.com/seetouch.
If no color is specified, wallstations
will ship with Arctic white (AW) finish.
How to Build a Custom International seeTouch® QS Model Number
QSWE- - -
Engraving Codes
Omit: Unengraved
EGN: General Engraving
For “Lights only” and “Lights and Shades”
controls
E01: Standard Engraving
For “Shades only” controls
E02: Secondary engraving for “Shades only” controls
NST: Non-Standard Text Engraving
Please visit the GRAFIK Eye® QS website at
www.lutron.com/grafikeyeqs for custom
engraving forms
Prefix
Color/
Finish
Button
Configuration
(see next
page)
Engraving
Code
Insert
Style
N: Non-insert
I: Insert
How to Build a Standard International seeTouch® QS Model Number
QSWE - -AW
Prefix
White
Matte
Finish
Button
Configuration
(see next page)
Insert
Style
N: Non-insert
I: Insert
Engraving Notes
• The engraving option (model number and suffix)
is related to the control type, as shown above in
the ‘How to Build a Standard International
seeTouch® QS Model Number’ section.
• Three engraving options are available:
1. EGN: General engraving for ‘Lights Only’ and
‘Lights and Shades’ controls
2. E01: Standard engraving for ‘Shades Only’
controls and ‘Lights and Shades’ for
model QSWE-10BRLI-WH-E01 only
3. NST: Non-standard engraving for ‘Lights Only’,
‘Lights and Shades’, or ‘Shades Only’
controls
• If no engraving is specified, wallstations will ship
with an engraving certificate, with EGN being its
default engraving type.
15
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 16 08.21.15
®
International
How to Build an International seeTouch® QS Model Number (continued)
Button Configurations
2B
2-button
3B
3-button
4B
4-button
5BRL
5-button with raise/lower
8BRLIR
8-button with IR receiver
and raise/lower
5BRLIR
5-button with IR receiver
and raise/lower
6BRL
6-button with raise/lower
7BRL
7-button with raise/lower
8BRL
8-button with raise/lower
10BRL
10-button with raise/
lower
16
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 17 08.21.15
®
International
Non-Insert Kit
Insert Kit
Faceplate Information
Faceplate Replacement Kits
Use Faceplate Replacement Kits to change: colors, button configuration, engraving, between insert
and non-insert versions. Each Kit includes an adapter, button assembly, and wallplate.
Non-insert style controls: Faceplate complements a
specified button kit. When the faceplate is removed or
replaced, the buttons are removed and replaced along with it.
Insert style controls: Faceplate is a decorator style with a
universal size opening that fits all button kits. This style allows for
easy replacements of button kits without changing the faceplate.
Model Numbers for Kits
Non-Insert Insert
QSWER-2BN QSWER-2BI
QSWER-3BN QSWER-3BI
QSWER-4BN QSWER-4BI
QSWER-5BRLN QSWER-5BRLI
QSWER-5BRLIRN QSWER-5BRLIRI
QSWER-6BRLN QSWER-6BRLI
QSWER-7BRLN QSWER-7BRLI
QSWER-8BRLN QSWER-8BRLI
QSWER-8BRLIRN QSWER-8BRLIRI
QSWER-10BRLN QSWER-10BRLI
17
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 18 08.21.15
®
International
International seeTouch® QS Wallstation Button Functions Summary
Button Configuration
2B 3B 4B 5BRL
5BRLIR
6BRL 7BRL 8BRL
8BRLIR
10BRL
EGN (General Engraving) Functionality
Scene 1, Off
Scene 1, Off
Scenes 1-3,
Off
Scenes 1-4,
Off
Left:
Scenes 1-2,
Off
Right: Open,
Preset,
Close
Left:
Sce ne 1, O ff
Right:
Scenes 1-4,
Off
Left:
Scenes 1-2,
Off
Right: Open,
Presets 1-3,
Close
NA
E01 (Standard Engraving) Functionality
NA NA NA Open,
Presets 1-3,
Close
Left:
Groups 1-3
Right:
Open,
Preset,
Close
Left:
Groups 1-2
Right:
Open,
Presets 1-3,
Close
Left:
Groups 1-3
Right:
Open,
Presets 1-3,
Close
Left:
Scenes 1-4,
Off
Right:
Open,
Presets 1-3,
Close
Legend:
Light Control
Shade Control
18
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 19 08.21.15
®
International
4
3
2
1
Wallstation Installation
QS Link Wiring
• Use SELV / PELV wiring to connect Wallstations to
the QS link.
• Connect two 0.5 mm
2
(22 AWG) shielded, twisted
pair wires to terminals 3 and 4 of the wallstation’s
control link connector. Shielding (drain) of the
twisted pair wires must be connected together as
shown, but do not connect the shielding to earth/
ground or the wallstation and do not allow it to
contact the grounded wallbox.
• Connect the appropriate size wires to terminals 1
and 2 for power, according to your link length (see
table below).
• Connect Drain/Shield as shown. Do not connect to
Ground (Earth) or Wallstation. Connect the bare
drain wires and cut off the outside shield.
Note: Use appropriate wire connecting devices as
specified by local codes.
(2) 4.0 mm
2
(12 AWG)
(2) 4.0 mm
2
(12 AWG)
QS Link Wire Sizes (check compatibility in your area)
QS Link Wiring Length Wire Gauge Lutron Cable Part Number
Less than 153 m (500 ft)
Power (terminals 1 and 2)
1 pair 1.0 mm
2
(18 AWG) GRX-CBL-346S (non-plenum)
GRX-PCBL-346S (plenum)
Data (terminals 3 and 4)
1 twisted, shielded pair 0.5 mm
2
(22 AWG)
153 to 610 m
(500 to 2 000 ft)
Power (terminals 1 and 2)
1 pair 4.0 mm
2
(12 AWG) GRX-CBL-46L (non-plenum)
GRX-PCBL-46L (plenum)
Data (terminals 3 and 4)
1 twisted, shielded pair 0.5 mm
2
(22 AWG)
Link Wiring (153 m/500 ft to 610 m/2 000 ft)
Link Wiring (<153 m/500 ft)
SELV / PELV Control
wiring
(2) 1.0 mm
2
(18 AWG)
1: Common
2: V+
Data Link:
(1) twisted, shielded pair
0.5 mm
2
(22 AWG)
3: MUX
4: MUX
4 3 2 1
C B A
SELV / PELV control wiring
(2) 1.0 mm
2
(18 AWG)
1: Common
2: V+
Drain
Data link:
(1) twisted, shielded pair
0.5 mm
2
(22 AWG)
3: MUX
4: MUX
Back View
19
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wallstations
369273c 20 08.21.15
®
International
Contact Closure Inputs
Specifications
• Inputs must be dry contact closure, solid-state,
open collector, or active-low (NPN)/active-high
(PNP) output.
- Open collector NPN or active-low on-state voltage
must be less than 2 V and sink 3,0 mA
- Open collector PNP or active-high on-state
voltage must be greater than 12 V and source
3,0 mA
• Wallstation is miswire protected up to 36 V .
• Outputs must stay in the closed or open states for
at least 40 msec in order to be recognized by the
Wallstation.
Contact Closure Input Wiring
• Use SELV / PELV wiring to connect the contact
closure inputs to the Wallstation.
4 3 2 1
C B A
B: Input 2
A: Input 1
C: Common
(3) 1.0 mm
2
(18 AWG)
Back View
20
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

InternationalseeTouchQS International seeTouch QS Spec Sheet

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 11 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document