Fillable Hi-lumeLED Spec Sub

Fill Online, Printable, Fillable, Blank Hi-lumeLED Spec Sub Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Hi-lumeLED Spec Sub

On average this form takes 18 minutes to complete

The Hi-lumeLED Spec Sub form is 16 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 70 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Hi-lume® LED Architectural Dimming
Hi-lume LED 1 12.11.09
Hi-lume LED Overview
Hi-lume LED is a high-performance, constant current
driver that provides energy-efficient dimming for LED
lighting. With industry-leading full-range 100% to 1%
dimming, Hi-lume LED provides the ideal functionality
for any lighting application.
Features
• Continuous, icker-free dimming from 100% to 1%.
• Standard 3-wire line-voltage phase-control
technology for consistent dimming performance
and compatibility with all Lutron 3-wire uorescent
dimmers.
• EcoSystem
® Bus control, compatible with all Lutron
EcoSystem, GRAFIK Eye
® QSE and Quantum®
systems.
• Turns on to any dimmed level without ashing to
full brightness.
• Low harmonic distortion throughout the entire
dimming range maintains power quality.
• Protected from miswires of any input power to
control lead, or from lamp leads to each other
and/or ground.
• A rated lifetime of 50,000 hours.
• Instant light output at any level when turned on.
• UL recognized - for United States and Canada.
• For approved xtures please go to:
www.lutron.com/HilumeLED/xtures
Hi-lume LED, case type A
3.00 in (76 mm) W x 1.00 in (25 mm) H x
4.90 in (124 mm) L
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Hi-lume® LED Architectural Dimming
Hi-lume LED 2 12.11.09
Specifications
Performance
• Dimming Range: 100% to 1% measured
relative light output (RLO)
• Relative Humidity: maximum 90% non-condensing
• Operating Voltage: 120/277 V
at 50/60 Hz
• Power Factor: greater than .90 at 25 W
• Total Harmonic Distortion (THD): less than 20% at
25 W
• Inrush Current < 2 A
• Sound Rating: Inaudible in a 24 dB ambient
• A rated lifetime of 50,000 hours - maximum case
temperature: 73 ºC
Standards
• Class P thermally protected
• Meets FCC Part 15 Non-Consumer requirements
for EMI/RFI emissions in a typical grounded xture
• Manufacturing facilities employ ESD reduction
practices that comply with the requirements of
ANSI/ESD S20.20
• Lutron Quality Systems registered to ISO
9001.2000
• UL 8750 recognized
• cUL recognized for use in Canada
• Class 2 output
Driver Wiring & Mounting
• Driver is grounded by a mounting screw or by
terminal connection to the grounded xture
• Terminal blocks on the driver accept one 18 AWG
or 16 AWG solid wire per terminal
• Fixture must be grounded in accordance with local
and national electrical codes
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Hi-lume® LED Architectural Dimming
Hi-lume LED 3 12.11.09
0.70 Amp Driver
L3D25070AUNV1S*
Electrical Ratings (Typical)**
Model Input Line
Voltage
Input Line
Current
Input
Frequency
Output
Voltage
Output
Current
Output
Power
Class 2
L3D25070AUNV1S
120/277 V
0.27/0.13 A 50/60 Hz 10-36 V 0.70 A
+
5% 7-25 W Yes
* The “S” at the end of the ballast number indicates a studded option. Remove the “S” for a non-studded driver.
** At full light output.
Output Voltage vs. Output Current
Efficiency vs. Output PowerTHD vs. Output Power
THD (%)
Output Power (Watts)
Efficiency (%)
Output Power (Watts)
Power Factor vs. Output Power
Power Factor
Output Power (Watts)
Output Voltage (volts)
Output Current (Amps)
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Output Power (Watts)
Power Factor
120 V
277 V
0
10
20
30
40
50
60
70
80
90
100
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Output Power (Watts)
Efficiency (%)
120 V
277 V
10
12
14
16
18
20
22
24
26
28
30
32
34
36
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Output Current (Amps)
Output Voltage (volts)
120 V
277 V
120 V
3
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Hi-lume® LED Architectural Dimming
Hi-lume LED 4 12.11.09
1.05 Amp Driver
L3D25105AUNV1S*
Electrical Ratings (Typical)**
Model Input Line
Voltage
Input Line
Current
Input
Frequency
Output
Voltage
Output
Current
Output
Power
Class 2
L3D25105AUNV1S
120/277 V
0.27/0.13 A 50/60 Hz 7-24 V 1.05 A
+
5% 7-25 W Yes
* The “S” at the end of the ballast number indicates a studded option. Remove the “S” for a non-studded driver.
** At full light output.
Output Voltage vs. Output Current
Efficiency vs. Output PowerTHD vs. Output Power
THD (%)
Output Power (Watts)
Efficiency (%)
Output Power (Watts)
Power Factor vs. Output Power
Power Factor
Output Power (Watts)
Output Voltage (volts)
Output Current (Amps)
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
0.0 0.2 0.4 0.6 0.8 1.0 1.2
Output Current (Amps)
Output Voltage (volts)
120 V
277 V
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Output Power (Watts)
Power Factor
120 V
277 V
0
5
10
15
20
25
30
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Output Power (Watts)
THD (%)
120 V
277 V
0
10
20
30
40
50
60
70
80
90
100
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Output Power (Watts)
Efficiency (%)
120 V
277 V
4
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Hi-lume® LED Architectural Dimming
Hi-lume LED 5 12.11.09
1.40 Amp Driver
L3D25140AUNV1S*
Electrical Ratings (Typical)**
* The “S” at the end of the ballast number indicates a studded option. Remove the “S” for a non-studded driver.
** At full light output.
Model Input Line
Voltage
Input Line
Current
Input
Frequency
Output
Voltage
Output
Current
Output
Power
Class 2
L3D25140AUNV1S
120/277 V
0.27/0.13 A 50/60 Hz 7-18 V 1.40 A
+
5% 10-25 W Yes
Output Voltage vs. Output Current
Efficiency vs. Output PowerTHD vs. Output Power
THD (%)
Output Power (Watts)
Efficiency (%)
Output Power (Watts)
Power Factor vs. Output Power
Power Factor
Output Power (Watts)
Output Voltage (volts)
Output Current (Amps)
7
8
9
10
11
12
13
14
15
16
17
18
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
Output Current (Amps)
Output Voltage (volts)
120 V
277 V
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Output Power (Watts)
Power Factor
120 V
277 V
0
5
10
15
20
25
30
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Output Power (Watts)
THD (%)
120 V
277 V
0
10
20
30
40
50
60
70
80
90
100
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Output Power (Watts)
Efficiency (%)
120 V
277 V
5
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Hi-lume® LED Architectural Dimming
Hi-lume LED 6 12.11.09
2.10 Amp Driver
L3D25210AUNV1S*
Electrical Ratings (Typical)**
Model Input Line
Voltage
Input Line
Current
Input
Frequency
Output
Voltage
Output
Current
Output
Power
Class 2
L3D25210AUNV1S
120/277 V
0.27/0.13 A 50/60 Hz 7-12 V 2.10 A
+
5% 15-25 W Yes
* The “S” at the end of the ballast number indicates a studded option. Remove the “S” for a non-studded driver.
** At full light output.
Output Voltage vs. Output Current
Efficiency vs. Output PowerTHD vs. Output Power
THD (%)
Output Power (Watts)
Efficiency (%)
Output Power (Watts)
Power Factor vs. Output Power
Power Factor
Output Power (Watts)
Output Voltage (volts)
Output Current (Amps)
L3D25210AUNV1S
Iout vs Vout
7
7.5
8
8.5
9
9.5
10
10.5
11
11.5
12
0 0.5 1 1.5 2 2.5 3
Iout(Amps)
Vout(Volts)
120 V
277 V
L3D25210AUNV1S
Output Power vs THD(max)
0
5
10
15
20
25
30
15 16 17 18 19 20 21 22 23 24 25
Output Power(Watts)
THD(%)
277 V
120 V
L3D25210AUNV1S
Output Power vs Power Factor
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
15 16 17 18 19 20 21 22 23 24 25
Output Power(Watts)
Power Factor
120 V
277 V
L3D25210AUNV1S
Output Power vs Efficiency
0
10
20
30
40
50
60
70
80
90
100
15 16 17 18 19 20 21 22 23 24 25
Output Power(Watts)
Efficiency(%)
120 V
277 V
6
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Hi-lume® LED Architectural Dimming
Hi-lume LED 7 12.11.09
Case Dimensions
A 4.20 in (107 mm)
B 1.00 in (25 mm)
C 3.00 in (76 mm)
D 4.90 in (124 mm)
E 4.60 in (117 mm)
(mounting centers)
F 2.00 in (51 mm)
G 1.08 in (27 mm)
H 1.60 in (41 mm)
I 1.39 in (35 mm)
A
G
C
F
H
E
D
8-32 Threaded Stud
0.29 in (0.736 mm)
I
B
Wiring Diagram for 3-Wire Dimming
* The “S” at the end of the ballast model number indicates a studded option. Remove the “S” for a non-studded driver.
Hi-lume
LED
Hot
Neutral
Ground
To Line
Voltage
To EcoSystem
Bus
E1
E2
Ground
**
+V
-V
†
†
LED
light
engine
Hi-lume
LED
**
Dimmed Hot
Switched Hot
Neutral
Ground
4-pin
Lamp Holder
To
Dimming
Control
1
,
1
+V
Ground
-V
†
†
LED
light
engine
Wiring Diagram for EcoSystem® Digital Control
** Fixture must be grounded in accordance with local and national electrical codes.
† Maximum lamp-to-driver wire length is 3 ft (1 m).
*
7
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Hi-lume® LED Architectural Dimming
Hi-lume LED 8 12.11.09
Hi-lume LED
3-Wire LED Dimmer Wiring Diagram
Hi-lume LED can be controlled with Lutron
uorescent analog controls, including:
• Ariadni
® • Lyneo LXTM
• Diva® • Maestro®
• GRAFIK Eye® • Nova®
• GRAFIK Eye® QS • Nova T ®
• GRAFIK 5000TM • Skylark®
• GRAFIK 6000® • Vareo®
• GRAFIK 7000TM • Vierti®
3-wire control wiring
• Make sure that the supply breaker to Hi-lume LED
Driver and dimmer is OFF when wiring.
• Wire as shown
Line input: Connects to:
Hot Dimmer Black Wire
Neutral Dimmer White Wire
Dimmer wire: Connects to:
Yellow Driver Orange (DH)
Red Driver Black (HOT)
White Driver White (NEU)
Green Earth Ground and Driver Ground
Hi-lume LED driver terminals accept one
18 AWG or 16 AWG solid wire per terminal.
HOT DH NEU GND E1 E2
-V +V NC
HOT DH NEU GND E1 E2
-V +V NC
LUTRON
Ground*
Ground*
Ground*
Green
3-Wire Dimmer
Red
Yellow
Hot / Black
Neutral / White
Green
Orange
Black
White
* Fixture must be grounded in accordance with local and national electrical codes.
8
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Hi-lume® LED Architectural Dimming
Hi-lume LED 9 12.11.09
Hi-lume LED
EcoSystem
® Wiring Diagram
Hi-lume LED can be controlled digitally as part of
an EcoSystem
®, GRAFIK Eye® QSE and/or
Quantum
® system. Within these systems it is ad-
dressed and configured over the EcoSystem bus
wiring (E1 and E2).
• Connect the two conductors to the two Digital Driver
terminals E1 and E2 as shown.
• Sensors cannot directly connect to the Hi-lume LED
driver. The Hi-lume LED driver can integrate with
sensors when connected to EcoSystem ballasts and
EcoSystem power modules.
• Make sure that the supply breaker to the Hi-lume
LED Driver and EcoSystem Bus Supply is OFF
when wiring.
• E1 and E2 (EcoSystem bus wires) are polarity
insensitive and can be wired in any topology.
• An EcoSystem Bus Supply provides power for the
EcoSystem bus and supports system programming.
• The EcoSystem bus may be wired Class 1 or Class
2. Consult applicable electrical codes for proper
wiring practices.
Note: EcoSystem Bus length is limited by the wire
gauge used for E1 and E2 as follows:
Wire Gauge Bus Length (max)
12 AWG 2200 ft (670 m)
14 AWG 1400 ft (427 m)
16 AWG 900 ft (274 m)
The Hi-lume LED driver terminals and EcoSystem
Bus terminals accept one 18 AWG or 16 AWG solid
wire per terminal.
HOT DH NEU GND E1 E2
-V +V NC
HOT DH NEU GND E1 E2
-V +V NC
* Fixture must be grounded in accordance with local and national electrical codes.
Ground *
Ground *
E2
Driver Terminals
Driver Terminals
To the EcoSystem
Bus Supply and
up to 64 total
drivers or ballasts
E1
Hot
Neutral
Lighting
circuit fed
from
distribution
or switch
panel
9
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Hi-lume® LED Architectural Dimming
Hi-lume LED 10 12.11.09
ATTENTION
ELECTRICIANS
AND CONTRACTORS
Driver Leads
Lead lengths from driver to LED light engine must
not exceed 3 ft (1 m).
Driver Operating Temperature
Driver case temperature must not exceed 73 °C
at any point.
Wiring and Grounding
Driver and lighting xture must be grounded. Drivers
must be installed per national and local electrical
codes.
ATTENTION
FACILITIES MANAGERS
SERVICE
Replacement Parts
Use replacement parts with exact Lutron model
numbers. Consult Lutron if you have any
questions.
Further Information
For further information, please visit us at
www.lutron.com/hilumeLED or contact our 24-hour
Technical Support Center at 1-800-523-9466.
10
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Hi-lumeLED Spec Sub

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 11 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document