Lutron®—Insulating Honeycomb Shade Selection Guide
Important: If you plan on installing the shade in a place where you need to raise the entire shade above
an obstacle (such as above doors that open), please refer to our stacking guidelines (P/N 368-2548) or
contact customer service to determine how high to mount your shade.
Residence: ______________________ Room: ______________________ Window(s): __________________
Step 1 Option B: Outside Mount On Trim Measurements
Step 1 Option C: Outside Mount Above Trim Measurements
Width: The width of your shades is up to you.
For example, if you’d like to completely
cover the window, measure from edge
to edge of the frame.
Height: Measure from the top of the
trim to the windowsill.
Order width:
inches/mm
Order height:
inches/mm
Side
view
Order width: Order height:
inches/mm
(Smallest of the three measurements) (Largest of the three measurements)
inches/mm
Inside Mount Measurements
•
Depth of window must be at least 1½" (38.1 mm) to use inside mounting option.
•
Do not make any deductions from the width! Lutron will deduct
1
/8" (3.175 mm)
per side on inside mounted shades to allow room for proper operation.
•
Lutron will make NO additions or deductions to the height measurement.
inches/mm
A
inches/mm
D
inches/mm
B
inches/mm
E
inches/mm
C
inches/mm
F
(Circle one) (Circle one)
A
B
C
D E F
Side
view
Width:
Height:
Width: The width of your shades is
up to you. For example, if
you’d like to completely cover
the window, measure from
edge to edge of the frame.
Order width:
inches/mm
Order height:
inches/mm
Side
view
Step 1 Option A: Inside Mount Measurements
Height: Determine where you’re going to mount the shade.
Then measure from where the top of the headrail
would fall, down to the windowsill.
Note: The motorized bracket is 2
5
/8" (66.7 mm) high, however, it is
recommended to allow for at least 3
1
/8" (79.4 mm) of space above the
top edge of the window trim (manual shade brackets require you to
allow for 1
5
/8" (41.3 mm)).
