Job Name:
Job Number:
Model Numbers:
Page
SPECIFICA
TION SUBMITTAL
gr6hhp-2 01.10.06
Programming ToolsHand-Held Programmer
GRAFIK Systems
Key Design Features
• LCD display screen.
• 25 ft. (7m) cord with self-locking connector plugs into NTOMX-HHPJ
Hand-Held Programmer Jack.
• Hard-cover, foam-padded custom carrying case.
Preset Lighting Adjustments
• Select any area, scene, or zone
1,2
on the processor that the Hand-Held
Programmer is connected to physically.
• View any zone
1,2
– all the lights in the zone flash.
• Change zone intensities
1,2
from off to the maximum level in 1%
increments.
• Change zone
1,2
fade and fade delay times
1
in these ranges and
increments:
Time Ranges Increments
0 to 9.9 seconds 0.1 second
10 to 99 seconds 1.0 second
1.7 to 9.9 minutes 0.1 minute
10 to 99 minutes 1.0 minute
System Communications and Capacity
Works within 25 ft. (7m) of any NTOMX-HHPJ Hand-Held Programmer
Jack. Only one Hand-Held Programmer or PC User Interface may be in
use at a time. (PC takes priority over Hand-Held Programmer.)
Physical Design
• Color: Beige
• Height: 7.31” (186mm), Width: 5.38” (137mm), Depth: 2.13” (54mm)
Additional Notes
• Hand-Held Programmers can only support ASCI 7-bit characters (A-Z, a-
z, and 0-9) only
.
•
Hand-Held Pr
ogrammers do not support hierarchical spaces; they display
all spaces as a single list.
Specifications
1
Zones assigned to Sliders cannot be adjusted fr
om the Hand-Held Pr
ogrammer
.
2
Zones assigned to Lighting Zone Controllers or OMX-3600 controls cannot be
viewed or controlled by the Hand-Held Programmer.
