Fillable Fdbi Fdbi.qxp (Lutron Electronics, Inc.)

Fill Online, Printable, Fillable, Blank Fdbi Fdbi.qxp (Lutron Electronics, Inc.) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Fdbi Fdbi.qxp (Lutron Electronics, Inc.)

On average this form takes 7 minutes to complete

The Fdbi Fdbi.qxp (Lutron Electronics, Inc.) form is 4 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 28 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
fdbi-1 06.13.07
Power Interfaces
FDBI
®
FDBI Fluorescent Dimming Ballast Interface
Description
• Provides capability for GRAFIK Eye 3000 Series
Control Units and LP Dimming Panels to dim
fluorescent lights that have Lutron Hi-Lume
®
and Eco-10TM (Eco-Series) line-voltage control
Electronic Dimming Ballasts.
• Models available for 120 V , 220-240 V
(non-CE), or 100 V input power.
Works with:
• GRAFIK Eye 3000 Series Control Units
• LP Dimming Panels
• HomeWorks Remote Power Panels
• Neutral-referenced wallbox dimmers by Lutron.
Model Number
GRX-FDBI-16A-120
NGRX-FDBI-AU-WH
NGRX-FPB1V-JA-WH
Capacity
16 A
10 A
16 A
Input Power
120 V
220-240 V (non-CE)
100 V
Models and Capacities
1
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
fdbi-2 06.13.07
Power Interfaces
FDBI
®
Power
• Input power: 120 V , 220-240 V (non-CE), or
100 V .
All voltages 50/60 Hz, phase-to-neutral.
• Load (output) power: Phase independent of Control
Unit.
Sources/Load Types
Operates Lutron Hi-lume
® and Eco-10TM (Eco-Series)
line-voltage control Electronic Fluorescent Dimming
Ballasts with a smooth continuous Square Law dimming
curve.
Key Design Features
Patented RTISSTM circuitry compensates in real time for
incoming line voltage variations: No visible flicker with
+/-2% change in RMS voltage/cycle and +/-2% Hz
change in frequency/second.
Terminals
Accept up to two #12 AWG (2.5 mm
2
).
Environment
32 - 104 °F (0 - 40 °C). Relative humidity
less than 90% non-condensing.
Mounting
Surface or recess mount indoors only.
Specifications
2
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
fdbi-3 06.13.07
Power Interfaces
FDBI
®
Side View
Surface Mount without Faceplate
Recess Mount with Faceplate
2-Gang
U.S. Wallbox
4 9/16 in.
(116 mm)
11/16 in.
(17 mm)
1 7/8 in.
(48 mm)
4 in.
(100 mm)
• Recess or surface mount in 2-gang U.S.
wallbox 3.5 in. (89 mm) deep. Indoors only.
• FDBI Interface generates heat; mount only
where ambient temperature is 32 - 104 °F
(0 - 40 °C).
• Mount with arrows facing up to ensure
adequate cooling.
• Allow 4.5 in. (114 mm) above and below
unit and between faceplates when mount-
ing several in a vertical layout.
• For better heat dissipation, surface mount
without faceplate.
• Mount so line (mains) voltage wiring is at
least 6 feet (1.8 m) from sound or electron-
ic equipment and wiring.
• Mount Interface within 7° of true vertical.
Dimensions And Mounting
3
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
fdbi-4 06.13.07
Power Interfaces
FDBI
®
Neutral N
Zone In
Zone Out
Earth/Ground
Hot/Live
SW Hot
TO NEUTRAL
TO APPLICABLE ZONE
TO HOT/LIVE
Neutral N
Zone In
Zone Out
Earth/Ground
Hot/Live
SW Hot
TO NEUTRAL
TO APPLICABLE ZONE
TO HOT/LIVE
• Pull #12 AWG (2.5 mm
2
) Copper (Cu) wires (75 °C minimum) for
input power and load circuit.
• Strip 1/2 in. (12 mm) insulation from wires before connecting.
• Run separate neutral for load circuit - no common neutrals.
Neutral (N) terminal is for Control Unit, not the load neutral.
Multiple Power Feeds
The FDBI may be on the same circuit as the
Control Unit only if the total load does not
exceed the rating of the breaker.
Wiring
Single Power Feed
The load breaker/MCB may be on a different phase than the control breaker/MCB.
With Other Lutron Lighting Controls
To wire an FDBI Interface to a fluorescent dimmer:
• Run a Neutral wire from the control equipment to Neutral N on the FDBI.
• Run a dimmed hot wire from the control equipment to Zone In on the FDBI.
Neutral
Feed from
Distribution
Panel
Hot/Live
Dimming Ballast
Earth/Ground
Orange
Black
White
Rear View of FDBI
Load Neutral
GRAFIK Eye 3000
Series Control Unit
Orange
Black
White
Rear View of FDBI
Dimming Ballast
Earth/Ground
Load Neutral
GRAFIK Eye 3000
Series Control Unit
Neutral
Hot/Live
Neutral
Hot/Live
Feed 1 from
Distribution
Panel
Feed 2 from
Distribution
Panel
4
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Fdbi Fdbi.qxp (Lutron Electronics, Inc.)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 21 July 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document