R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
fomx-2 04.26.04
Wallstations
Single Button
GRAFIK Systems
FOMX-1B-WH
1-Button Wallstation
FOMX-1B-WH
Tap Button
Description
• Used to control one or more lighting zones.
• Simple wallstation with one tap button.
• Provides toggle functionality for any zone(s) in the
system.
• Shipped with screwless Fassada
TM Fashion
Wallplates, which snap on with no visible means of
attachment. Models are available that ship without
a wallplate.
• Offered in white (WH) only - white frame and white
button.
• Works with GRAFIK 5000
TM, GRAFIK 6000®,
GRAFIK 7000
TM, and Softswitch128TM systems.
1
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
fomx-3 04.26.04
Wallstations
Single Button
GRAFIK Systems
Power
Low-voltage type Class 2 (PELV).
Key Design Features
• Front accessible address switch allows change of
address without removing the unit from the wall.
(Address switch located behind the wallplate).
• Meets IEC 801-2. Tested to withstand 15kV
electro-static discharge without damage.
• Can be ganged in standard opening multigang
faceplates with other FOMX-1B wallstations.
System Communications
• Low-voltage type Class 2 (PELV) wiring connects
Wallstations to Processor Panel.
• Four connections at the Wallstation to the Control
Link for power and data.
Environment
32-104°F (0-40°C). Relative humidity less than 90%
non-condensing.
Specifications
Description
Model Number
FASSADATM Wallplate Ordering Information
1-gang wallplate
FW-1-WH
2-gang wallplate
FW-2-WH
3-gang wallplate
FW-3-WH
4-gang wallplate
FW-4-WH
2
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
fomx-4 04.26.04
Wallstations
Single Button
GRAFIK Systems
• Use low-voltage Class 2 (PELV) wiring to daisy-chain
Wallstations to the Processor Panel.
• Two #12 AWG (2.5mm
2
) conductors for common
and power.
• One shielded, twisted pair #22 AWG (0.6mm
2
) for
data link.
• Do not connect Drain/Shield to Ground (Earth) or
Wallstation. Connect the bare drain wires and cut off
the outside shield.
• Make connections inside the wallbox or in a
switchbox or junction box with a maximum wire
length of 8 feet (2.5m) from the link to the
Wallstation.
(1) twisted, shielded pair
#22 AWG (0.6mm
2
)
Drain/Shield
(2) #12 AWG
(2.5mm
2
)
(2) #12 AWG
(2.5mm
2
)
Flying leads from wallstation:
1: Black (Common)
2: Red (Power)
3: White/Black (MUX)
4: Purple (MUX)
Black
White/Black
Purple
(1) #18 AWG
(1.0mm
2
)
(1) #20 AWG (0.8mm
2
)
(1) #20 AWG (0.8mm
2
)
(1) twisted, shielded pair
#22 AWG (0.6mm
2
)
Low-Voltage Class 2 (PELV) Wiring
(1) #18 AWG
(1.0mm
2
)
Red
3