Fillable Form 369883 (Lutron Electronics, Inc.)

Fill Online, Printable, Fillable, Blank Form 369883 (Lutron Electronics, Inc.) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Form 369883 (Lutron Electronics, Inc.)

On average this form takes 25 minutes to complete

The Form 369883 (Lutron Electronics, Inc.) form is 20 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 98 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883f 1 07.27.18
The Hi-lume Premier 0.1% Constant Voltage Driver
(L3D0) is a high-performance LED driver capable of
controlling up to 96 W of 24 V- constant voltage
loads. This driver provides smooth and continuous
dimming down to 0.1% low-end. It is ideal for use with
strip lighting in applications such as coves, under or
over cabinet lighting and pathway lighting. The driver is
UL
® Listed with an integrated wiring compartment and
can be mounted up to 150 ft (45 m) away from the
load.
Features
•Continuous,icker-freedimmingfrom100%to0.1%
1
.
•Soft-on,Fade-to-Black operationforEcoSystem
controls: fades smoothly between 0% and 0.1% when
turnedonandoffforanincandescentlikeexperience.
2
•PWMdimmingmeetsIEEE1789overtheentire
dimming range.
•UL
®ListedforUnitedStatesandCanada(cULus®).
•NOMcertiedforMexico.
•FieldAdjustmentKnobofferscustomerlow-endlight
outputtuningforbetterxture-to-xturematching.
•Guaranteeddimmingperformancewhenusedwith
Lutron controls:
–HomeWorksQS,EnergiSavrNodeunitswith
EcoSystem controls,GRAFIKEyeQSwith
EcoSystem controls,PowPakwithEcoSystem
dimmingmodules,PowPakwithEcoSystem wireless
xturecontrols,andQuantumsystems,allowingfor
integrationintoaplannedorexistingEcoSystem
lighting control solution.
– Lutron 3-wire controls and interfaces.
•Protectedfrommiswiresofinputpower,upto277V~,
toEcoSystemcontrolinputs...
•Ratedlifetimeof50,000hoursat40°C(104°F)
ambienttemperatureandmaximumloading.
•FCCPart15
–ClassA(277V~)
–ClassB(120V~)
1
Lightoutputat0.1%dependsoninstallationandlightengineefcacy.
2
Soft-on,Fade-to-Blackdimmingtechnologyisnotavailablefor3-wirecontrols.
Hi-lume Premier 0.1% EcoSystem / 3-wire
Constant Voltage 24 V- LED Driver with
Soft-on, Fade-to-Black
•Inrushlimitingallowsfullloadingofcircuitbreakers
without nuisance tripping.
•100%end-of-lineperformancetestedataLutron
factory.
•RoHScompliant.
•Restoresallsettingsafterpowerfailure.
•BarrierprovidedforClass2separationinthewiring
compartment.
•Redundantconnectionsonlineandcontrolterminals
for easy daisy chain wiring.
•Redundantconnectionsonoutputterminalsallowfor
easy wiring of two LED load home runs.
•Class2outputdesignedtowithstandhotswap.
•Formoreinformationpleasevisit:www.lutron.com
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
5.5in(140mm)Wx2.0in(51mm)Hx10.5in(267mm)L
lutron.com
1
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883f 2 07.27.18
Specifications
Regulatory Approvals and Compliance
•LutronQualitySystemsregisteredtoISO9001.2015
•ManufacturingfacilitiesemployESDreduction
practices that comply with the requirements of
ANSI/ESDS20.20
•MeetsANSIC62.41categoryAsurgeprotection
standardsuptoandincluding4kV
•FCCPart15
–ClassA(277V~)
–ClassB(120V~)
•CANICES-005(A)(277 V~)
•CANICES-005(B)(120 V~)
•LEDdriversneedtomeetcertainperformancecriteria
in order for the completed luminaires to comply with
theENERGYSTARRLuminairesV2.0Specification.All
models meet these performance criteria throughout
their entire load compatibility regions. Consult
ApplicationNote#599“ENERGYSTARR Luminaires
V2.0 and Lutron Drivers” for availability dates of
compliant products.
•LEDdriversneedtomeetcertainperformance
criteria in order for the completed luminaires to
comply with Title 24 requirements as detailed in
CEC-400-2015-037-CMF.Allmodelsmeetboth
commercial (at 120 V~/277V~) and residential
(at 120V~) performance criteria throughout
their entire load operating regions. Consult
CEC-400-2015-032-CMFSection6.2.7forimportant
information on meeting start-up time requirements with
fade-in lighting.
•MeetsUL®8750/CSAC22.2No.250.13-14,“LightEmitting
Diode(LED)EquipmentForUseinLightingProducts”
•NOMcertied
•
Class 2 output; meets UL
®
1310/CSAC22.2No.223-M91
Performance
•DimmingRange:100%to0.1%
1
•LEDlightingturnsontoanydimmedlevelwithout
ashingtofullbrightness
•OperatingVoltage:120V~ to 277 V~at50/60Hz
•Ratedlifetimeof50,000hoursat40°C(104°F)
ambienttemperatureandmaximumloading
•Forratedwarranty,ambienttemperature(ta) not to
exceed40°C (104°F)(maximumratedtemperature)
2, 3
•Patentedthermalfoldbackprotection
•Non-volatilememoryrestoresalldriversettingsafter
power failure
•Typicalstandbypowerconsumption:0.25Wat
120V~ and 0.4 W at 277 V~
•Open-circuitprotectedoutput
•Short-circuitandoverload-protectedoutput
•Output:24V- constant voltage at high-end
•OutputLoadRange:2Wto96Wathigh-end
•PWMdimmingfrequency:meetsIEEE1789atall
dimlevels
•PowerFactor:>0.90atmaximumpower
•TotalHarmonicDistortion(THD):<20%at
maximumpower
•NEMA410–2011compliant
•InrushCurrentLimitingCircuitry:decreasescircuit
breakertripping,switcharcingandrelayfailure;allows
full loading of switch leg
•InrushCurrent:<2A
•Deviceturn-ontime:<100msfromelectronicoffand,
<500msfrompoweroff
•L3D0-96W24V-UdriverisprogrammedbyLutron
manufacturingandisNOTcongurablebytheLutron
QwikFigcongurationsystem
•NOMThermalClassication:ClassB
1
Lightoutputat0.1%dependsoninstallationandlightengineefcacy.
2
Tomaintainwarranty,installerisresponsibleforensuringthatthedriverambienttemperaturedoesnotexceed40ºC(104ºF).
3
Where ta is the temperature of the air directly surrounding the driver.
2
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883f 3 07.27.18
Specifications (continued)
Environmental
•Soundrated:ClassAinaudiblein24dBAambient
•RelativeHumidity:maximum90%non-condensing
•
MinimumOperatingAmbientTemperature:t
a
=0°C(32°F)
1
•Indooruseonly
•Ratedfordryanddamplocations
•MeetsNEC®requirementsforinstallationin“otherspaceused
for environmental air”
2
•MeetstheCanadianNationalBuildingCodePlenum
Requirementsforaconcealedspaceusedasaplenumwithina
oororroofassembly
•Maximumheatoutputofmodule:46BTU/hour
Driver Wiring and Mounting
Forbestinstallationpractices,pleaserefertoApplicationNote
#591atwww.lutron.com.
•Mountthedriverinapositionwhereitcanbeeasilylocatedand
accessed if service or troubleshooting is necessary.
•Driverisgroundedbyterminalconnection
•
Terminalblocksonthedriveracceptsolidorstrandedwireper
terminalfrom20AWGto12AWG(0.50mm
2
to 2.5 mm
2
).
•MaximumwirelengthbetweentheLEDdriverandthestartof
thelinearstripfordifferentwiresizesislistedbelow.Thetable
below can be used independently of the line voltage that is
powering the LED Driver.
Wire Gauge Maximum Lead Length
24AWG(0.20mm
2
)
3
6 ft (1.8 m)
22AWG(0.34mm
2
)
3
10 ft (3.0 m)
20AWG(0.50mm
2
) 15 ft (4.5 m)
18AWG(0.75mm
2
) 25 ft (7.62 m)
16AWG(1.0mm
2
) 40 ft (12.2 m)
14AWG(1.5mm
2
) 60 ft (18.3 m)
12AWG(2.5mm
2
) 100 ft (30.5 m)
10AWG(4.0mm
2
)
3
150 ft (45.7 m)
1
Where ta is the temperature of the air directly surrounding the driver.
2
Additionalconsiderationsmayberequiredbasedonstateandlocalcodesand
standards.
3
Tousewiregaugelargerorsmallerthanterminalblocks’ratedgaugeof20AWGto
12AWG(0.50mm
2
to 2.5 mm
2
), connect 1 ft (0.3 m) or less of rated wire from terminal
and connect with larger or smaller wire.
TerminalBlockDetails
LED
(-)
LED
(+)
E1/
DA1
E2/
DA2
L
DH N
D
3
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883f 4 07.27.18
Models Available
Model
Input
Voltage
(V~)
Input
Current
1
(A)
Typical
Power
Factor
1
Typical
THD
1
(%)
Output
Power
(W)
Output
Voltage
1
(V-)
3-Wire or
EcoSystem
Control
2
For 24 V-
Constant Voltage
LED Loads
L3D0-96W24V-U
120 0.92 0.99 8
2 – 96 24
277 0.40 0.94 13
2 – 96 24
1
Atmaximumoutputpower.
2
Forwiringoptions,seeWiring section, pages 9-11.
NOTE:
Specicationsaresubjecttochangewithoutnotice.
Output Voltage vs. Output Power
Output Power (W)
Output Power (W)Output Power (W)
Output Voltage (V)
THD
Efficiency
0
0
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
23.0
22.5
22.0
21.5
21.0
20.5
20.0
23.5
24.0
24.5
25.0
25.5
26.0
120 V~Key: 277 V~
120 V~Key: 277 V~120 V~Key: 277 V~
THD vs. Output PowerEfficiency vs. Output Power
10%
5%
0%
15%
20%
25%
30%
0 10 20 30 40 50 60 70 80 90 100
60
50
40
30
70
80
90
100
Output Power (W)
Power Factor
120 V~Key: 277 V~
Power Factor vs. Output Power
0 10 20 30 40 50 60 70 80 90 100
0.60
0.50
0.40
0.30
0.70
0.80
0.90
1.00
Shadedareameetstheperformancecriteriaofthe
ENERGYSTARRLuminairesV2.0Specification
4
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883f 5 07.27.18
50016452a
lutron.com
0
784276
166027
120 - 277 V 50 / 60 Hz 0,92 - 0,40 A 110 W Max
Soft-on, Fade-to-Black
TM
EcoSystem
TM
3-wire Constant Voltage LED Driver
LED Driver 4RM5
L3D0-96W24V-U
Allumage doux, fondu au noir
EcoSystem
TM
Pilote 3-fil tension constante pour DEL
USA / Canada: 1.844.LUTRON1 (1.844.588.7661)
Input | Entrée:
Output | Sortie:
24 V 4 A Max Class 2
B2
Warranty void if inner plastic cover is removed.
Garantie annulée si le couvercle plastique intérieur est ouvert.
Field Adjustment Knob
Bouton de Réglage pour utilisation en chantier
Hi-lume
®
Premier 0.1%
Suitable for damp locations.
Convient aux emplacements humides.
Use 20 - 12 AWG wire only.
Utiliser un fil de 0,50 - 2,5 mm² seulement.
WARNING
:
Shock hazard. May result in serious injury or death.
Disconnect power before opening top lid, servicing or installing.
AVERTISSEMENT
:
Danger d'électrocution. Peut causer de graves
lésions ou le décès de la personne. Couper l’alimentation du
disjoncteur avant de procéder à l’ouverture de couvercle supérieur,
au montage ou à l’entretien de l’installation.
Pats | Brevets: 7,911,156
Lid screws: 8-32 x 3/8” thread-rolling, serrated
Vis du couvercle: 8-32 x 3/8” roulage de filets, dentelées
1/4 in (6,5 mm)
Cu
Al
Enclosure Dimensions
Measurementsareshownas:in(mm)
Knockouts
•Sides
–4locations:1/2inor21mmtradesize
• Top
–2locations:1/2inor21mmtradesize
10.5 (267)
2.0 (51)
5.5 (140)
5
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883f 6 07.27.18
Mounting Options
1,2
1
Anyothermountingcongurationwillrequireadditionalmechanicalsupport.Improperinstallationmayresultinhazardstopersonnelorproperty.
2
Mountthedriverinapositionwhereitcanbeeasilylocatedandaccessedifserviceortroubleshootingisnecessary.
Mounting Surface
6
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883f 7 07.27.18
Barrier Installation and Driver Spacing Requirements
Measurementsareshownas:in(mm)
• Optionalbarriercanbeplacedeither
betweentheinputandEcoSystemcontrol
terminals (Option 1)whentheEcoSystem
linksarewiredasClass2orbetweenthe
EcoSystemcontrolandoutputterminals
(Option 2)whentheEcoSystemlinksare
wired as Class 1.
• For3-wirecontrol,barriercouldbeplacedin
either location.
• TheEcoSystemdigitallinkmaybewired
as Class 1 or Class 2. Please refer to
ApplicationNote#142atwww.lutron.com.
• Maintainaminimumof3.0in(76mm)between
any two Hi-lume Premier 0.1% drivers.
Option 1 Option 2
3.375 (86)
≥ 3.0 (76)
Barrier
≥ 3.0 (76)
Barrier
Barrier
Output
EcoSystem
Control
Input
Output Input
Output Input
EcoSystem
Control
EcoSystem
Control
7
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883f 8 07.27.18
Control Mounting Options (continued)
APowPakWirelessFixtureControlcanbemountedonthedriverusingthedriver'savailableknockouts.Additional
considerations may be required based on state and local codes and standards.
Suitable for damp locations.
Convient aux emplacements humides.
USA / Canada: 1.844.LUTRON1 (1.844.588.7661)
Pats. | Brevets: 7,911,156
L3D0-96W24V-U
4 A Max Class 2
Output | Sortie:
24 V-
0,92 - 0,40 A
Input | Entrée:
110 W Max50 / 60 Hz
120 - 277 V~
50016452a
lutron.com
Bouton de Réglage pour utilisation en chantier
Field Adjustment Knob
Use 20 - 12 AWG wire only.
Utiliser un fil 0,50 - 2,5 mm
2
seulement.
Warranty void if inner plastic cover is removed.
Garantie annulée si le couvercle plastique intérieur est ouvert.
B2
LISTED
LED Driver 4RM5
Hi-lume
®
Premier 0.1%
WARNING: Shock hazard. May result in serious injury or death.
Disconnect power before opening top lid, servicing or installing.
AVERTISSEMENT : Danger d'électrocution. Peut causer de graves
lésions ou le décès de la personne. Couper l’alimentation du
disjoncteur avant de procéder à l’ouverture de couvercle supérieur,
au montage ou à l’entretien de l’installation.
Lid screws: 8-32 x 3/8” thread-rolling, serrated
Vis du couvercle : 8-32 x 3/8” roulage de filets, dentelées
Cu
Al
1/4 in
(
6,5 mm
)
Soft-on, Fade-to-Black
™
EcoSystem
™
/ 3-wire Constant Voltage LED Driver
Allumage doux, fondu au noir
EcoSystem
™
pilote 3-fil tension constante pour DEL
1
Thewirelessxturecontrolwillneedtohaveitslow-endlevelreprogrammedtodimto0.1%output.Formoredetailonadjustingthelow-endlightlevel,
refertoApplicationNote#556atwww.lutron.com,call1.877.346.5338(U.S.A.andCanadaonly),oremailLEDs@lutron.com
Hi-lume Premier 0.1% Constant Voltage Driver
ModelL3D0-96W24V-U
PowPakDimmingModule
ModelRMJ-ECO32-DV-B
OR
PowPakFixtureControl
1
ModelFCJ-ECO,FCJS-ECO
Pico Wireless Control
ModelPJ2-3BRL-GWH-L01
8
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883f 9 07.27.18
Wiring
L3D Models: 3-Wire Controls (third wire required for control signal)
Wiring Diagram
Compatible Controls without Soft-on, Fade-to-Black dimming technology: Lutron 3-Wire Controls
5
Guaranteedperformancespecicationswiththecontrolslistedinthechartbelow.
Forassistanceselectingcontrols,contactourLEDCenterofExcellenceat1.877.346.5338(U.S.A.andCanada
only) or LEDs@lutron.com
Product
Model Number
Drivers per Control
2
Load Type
Low-end Trim
Setting
120 V~ 277 V~ 120 V~ 277 V~
NovaT* dimmer
NTF-10- NTF-10 -277-
1 –16 1 – 19 — —
NTF-103P- NTF-103P-277-
1 – 8 1 – 14 — —
Novadimmer
NF-10- NF-10-277- 1 – 16 1 – 19 — —
NF-103P- NF-103P-277-
1 – 8 1 – 14 — —
Skylarkdimmer
SF-10P- SF-12P-277- 1 – 8 1 – 14 — —
SF-103P- SF-12P-277-3-
1 – 8 1 – 14 — —
Diva dimmer
DVF-103P- DVF-103P-277-
1 – 8 1 – 14 — —
DVSCF-103P- DVSCF-103P-277-
1 – 8 1 – 14 — —
Ariadnidimmer
AYF-10 3P- AY F-10 3P-277- 1 – 8 1 – 14 — —
Maestrodimmer
MAF-6AM- MAF- 6AM-277- 1 – 6 1 – 14 — —
MSCF-6AM- MSCF- 6AM -277-
1 – 6 1 – 14 — —
MaestroWirelessdimmer
MRF2-F6AN-DV- 1 – 6 1 – 14 — —
RadioRA2dimmer RRD-F6AN-DV- 1 – 6 1 – 14
Dual voltage
3-wire dimmer
21%
4
HomeWorksQSdimmer HQRD-F6AN-DV- 1 – 6 1 – 14
Fluorescent3-wire
LED 3-wire
21%
4
Interfaces
3
PHPM-3F-120 - — 1 – 16 – — —
PHPM-3F-DV-
1 – 16 1 – 38 — —
1 – 16 1 – 38 — —
BCI-0-10
1 – 16 1 – 38 — —
GPdimmingpanels
Various 1 – 16 1 – 38 2-1 —
1
ForthemaximumwirelengthbetweentheLEDdriverandthestartofthelinearstrip,seechartsintheDriver Wiring and Mounting section.
2
Noderatingrequiredinmulti-gangapplicationsprovidedthatthexture-countdoesnotexceedthequantitylisted.
3
Pleaserefertointerfacespecicationsheetforcompatiblesystemlist.
4
Trim level allows the ability to get to 0.1% but might result in dead travel for 1%—4% on user interface for some installations. In this instance, 22% trim level
couldbeusedtoavoiddeadtravelbutmightresultin>0.1%dimlevel.
5
Soft-on,Fade-to-Blackdimmingtechnologyisnotavailablefor3-wirecontrols.
Note:ForinformationaboutLegacyproductuseinexistingcontrolapplications,contactLEDs@lutron.com
Lutron
3-Wire
Dimmer/
Module/Panel
Hi-lume
Premier
0.1 % Constant
Voltage
LED Driver
LED
Light
Engine
Dimmed Hot (DH)
L i n e / H o t
LED +
1
LED –
1
Neutral(N)
Neutral
Neutral
Ground
Ground
SwitchedLine/Hot(L)
To line
voltage
9
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883f 10 07.27.18
Wiring (continued)
L3D Models: EcoSystem Digital Controls
Compatible Controls with Soft-on, Fade-to-Black dimming technology: Lutron EcoSystem Digital Controls
Guaranteedperformancespecicationswiththecontrolslistedinthechartbelow.
Forassistanceselectingcontrols,contactourLEDCenterofExcellenceat1.877.346.5338(U.S.A.andCanada
only) or LEDs@lutron.com
Product
Model Number
Recommended
System Version
3
Drivers per Control
120 V~ 277 V~
PowPakDimmingModulewithEcoSystem
RMJ-ECO32-DV-B
URMJ-ECO32-DVB
5.9 or higher
32perEcoSystemlink
PowPak WirelessFixtureControlwithEcoSystem
2
FCJ-ECO
FCJS-ECO
0796554 or higher 3perEcoSystemlink
EnergiSavrNodeunitwithEcoSystem
QSN-1ECO-S,QSN-2ECO-S
QSN-2ECO-PS120
UQSN-1ECO-S,UQSN-2ECO-S
9.027 or higher 64perEcoSystemlink
GRAFIKEyeQSunitwithEcoSystem
QSGRJ-_E
QSGR-_E
— 9.009 or higher
64perEcoSystemlink
QuantumLightManagementHub QP2-_ P_C — 3.2 or higher
4
64perEcoSystemlink
HomeWorksQSwithEcoSystem
LQSE-2ECO-D
QSGRJ-_E
QSGR-_E
— 10 or higher
5
64perEcoSystemlink
1
ForthemaximumwirelengthbetweentheLEDdriverandthestartofthelinearstrip,seechartsintheDriver Wiring and Mounting section.
2
AlldevicesconnectedtoonePowPakWirelessFixtureControlwillbecontrolledtogether.Deviceswilldimtothesamelevelastheresultofacontrol
command.Thewirelessxturecontrolwillneedtohaveitslow-endlevelreprogrammedtodimto0.1%output.Formoredetailonadjustinglow-endlight
level,refertoApplicationNote#556atwww.lutron.com.
3
Forlowersystemversions,pleasevisitwww.lutron.com/LEDsystemchecktocheckifyoursystemrequireschanges.
4
Version 3.1 (or later) is required to dim lower than 1%.
5
Version 7.0 (or higher) is required to dim lower than 1%.
Hi-lume
Premier
0.1 % Constant
Voltage
LED Driver
ToEcoSystemDigitalLink
LED
Light
Engine
Line/Hot(L)
LED+
1
LED–
1
Neutral(N)
Ground
E1
E2
To line
voltage
10
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883f 11 07.27.18
Wiring (continued)
Continuous LED Light Run
In a continuous LED light run, it is best to connect the load wires in the middle of the LED light run. Please consult
load manufacturer best practices for any additional consideration in load installation.
When connecting several LED light homeruns, ensure that the wire lengths and wattages match as closely as
possible for best performance.
Hi-lume Premier
0.1 % Constant
Voltage LED Driver
LED
Light
Engines
LED +
LED –
Hi-lume Premier
0.1 % Constant
Voltage LED Driver
LED +
LED –
LED +
LED –
LED +
LED –
LED
Light
Engine
LED
Light
Engine
LED
Light
Engine
Forinstallationbestpractices,pleaserefertoApplicationNote#591atwww.lutron.com
11
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883f 12 07.27.18
EcoSystem Wiring
EcoSystem Digital Link Overview
•TheEcoSystemDigitalLinkwiring(E1andE2)
connects the digital ballasts and drivers together to
form a lighting control system.
•Sensorsdonotconnectdirectlytodrivers.Sensors
areintegratedthroughtheEcoSystemcontroller.
•E1andE2(EcoSystemDigitalLinkwires)are
polarity-insensitive and can be wired in any topology.
•PowerissuppliedtotheEcoSystemDigitalLinkfrom
the control system.
•Protectedfrommiswiresofinputpower,upto
277 V~
,toEcoSystemcontrolinputs.
EcoSystem Digital Link Wiring
•EcoSystemDigitalLinkterminalsaccept20AWG
to12AWG(0.50mm
2
to 2.5mm
2
) solid or stranded
copper wire per terminal.
•Makesurethatthesupplybreakertothedriversand
EcoSystemDigitalLinkSupplyisOFFwhenwiring.
•E1andE2terminalsofthedriverscanbedaisy
chained as shown to the right.
•UsingtwodifferentcolorsforE1andE2willreduce
confusion when wiring several drivers together.
•TheEcoSystemLinkmaybewiredClass1or
Class2(SeeLutronApplicationNote#142at
www.lutron.com for more details). Consult applicable
electrical codes for proper wiring practices. Ensure
that the barrier placement is consistent with this wiring
choice.
•Foremergencywiring,pleaserefertoLutron
ApplicationNote#106atwww.lutron.com.
Notes
•TheEcoSystemDigitalLinkSupplydoesnothave
tobelocatedattheendoftheDigitalLink.
•EcoSystemDigitalLinklengthislimitedbythewire
gauge used for E1 and E2 as follows:
Wire Gauge Digital Link Length (max)
12AWG 2200 ft
14AWG 1400 f t
16AWG 900 ft
18AWG 550 ft
20AWG 352 ft
Wire Size Digital Link Length (max)
2.5 mm
2
828 m
1.5 mm
2
517 m
1.0 mm
2
310 m
0.75 mm
2
207 m
0.50 mm
2
155 m
E1
E2
12
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883f 13 07.27.18
Field Adjustment Knob
TheFieldAdjustmentKnobislocatedonthesideoftheHi-lumePremier0.1%ConstantVoltageDriver(L3D0)
enclosure.Thisfeatureenablesthecustomertotunethelowestlightoutputachievedduringnormaloperation.An
exampleofthisscenarioisshownintheimagebelow.AdjustingtheFieldAdjustmentKnobofthelowerlight
outputdriverminimizesthelightoutputdifferenceandsetsthelow-endlightlevelat0.1%.Thisfeatureonly needs
to be used in cases of mismatched loads that are separately controlled by 2 or more units.
TheFieldAdjustmentKnobcannotxlightlevelmismatchamongloadsonthesamedriver.Forexample,two
homerunsofdifferentwattage.Forincreasingtheminimumlightoutputofallthedriversinaspace,pleaseuse
thecontrol'slow-endtrimfeature.UsingtheFieldAdjustmentKnobforthispurposewilldegradeOn/Offtransition
performance.
Figure 1: Cove Lighting with Mismatched Light Output at Low-End Due to Installation Variability
lutron.com
lutron.com
lutron.com
2 W Load
0.1% dim level
96 W Load
< 0.1% dim level
Figure 2: Cove Lighting After the Use of the Field Adjustment Knob Eliminates Mismatch without Costly Re-wiring
2 W Load
0.1% dim level
96 W Load
0.1% dim level
Steps:
1. Set the control to low-end and turn all knobs fully
counter-clockwise
2. Identify the driver with the lowest light output
3. Turn the knob clockwise until the light output
matches the brightest driver
4. Repeat steps 2-3 until all drivers match in low-end
light output
13
Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883f 14 07.27.18
Facilities Manager
Thisdevicecomplieswithpart15oftheFCCRules.
Operationissubjecttothefollowingtwoconditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
277 V~ NOTE: This equipment has been tested at
277 V~ and found to comply with the limits for a
ClassAdigitaldevice,pursuanttopart15oftheFCC
Rules.Theselimitsaredesignedtoprovidereasonable
protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operationofthisequipmentinaresidentialareais
likelytocauseharmfulinterferenceinwhichcasethe
user will be required to correct the interference at their
ownexpense.
120 V~ NOTE: This equipment has been tested at
120 V~ and found to comply with the limits for a Class
Bdigitaldevice,pursuanttopart15oftheFCCRules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
—Reorientorrelocatethereceivingantenna.
— Increase the separation between the equipment
and receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
—Consultthedealeroranexperiencedradio/TV
technician for help.
)Lutron,Lutron,Hi-lume,GRAFIKEye,PowPak,Quantum,HomeWorks,
Pico,NovaT*,Nova,Skylark,Diva,Ariadni,Maestro,MaestroWireless,
RadioRA,andEcoSystemaretrademarksofLutronElectronicsCo.,Inc.
registeredintheU.S.andothercountries.
Soft-on,Fade-to-Black,EnergiSavrNode,andQwigFigaretrademarks
of Lutron Electronics Co., Inc.
ENERGYSTARisaregisteredtrademarkoftheU.S.Environmental
ProtectionAgency
Service
Driver Warranty
Forwarrantyinformation,pleasevisit
www.lutron.com/driverwarranty
Replacement Parts
When ordering Lutron replacement parts, please
provide the full model number. Consult Lutron if you
have any questions.
Further Information
Forfurtherinformation,pleasevisitusat
www.lutron.com or contact our LED Control Center
ofExcellenceat1.877.346.5338(U.S.A.and
Canada only) or LEDs@lutron.com
14
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Form 369883 (Lutron Electronics, Inc.)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 19 July 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document