SPECIFICATION SUBMITTAL
Page
Job Name: Model Numbers:
Job Number:
Lutron Automated Roller Shades
085333b 1 08.29.16
Sivoia QS Triathlon WIDR Roller Shades
Lutron remote-controlled roller shades start, move, and stop
smoothly and quietly, providing privacy and light control at the
touch of a button.
Features
Battery-powered and wired power models
Battery-powered models feature 2-5 year battery life*
Ultra-quiet operation: 38 dBa measured 3 ft (1 m) from the drive
Precise drive is capable of stopping at 0.125 in (3 mm) intervals
throughout the entire travel of the shade
Triathlon technology maintains accurate hem bar alignment by
compensating for fabric weight and battery voltage
Easy installation and maintenance
Built in wireless communication using ClearConnect RF technology
Wireless control range: 30 ft (9 m)
* Battery performance details are available in your shade ordering tool.
Battery and Wire-Power Models
With Optional Fabric Wrapped Fascia
With Optional Architectural Fascia
Regulatory
cULus listed (E135084)
FCC (USA)
IC (Canada)
CFT (Mexico)
Ratings (Electronic Drive Unit)
Operating Voltage: 6-12V-
Operating Wattage: 5 W
Torque: 2.0 in•lb
Speed: 3.6 in/sec
Environment
Temperature: 32˚ F to 104˚ F (0˚ C to 40˚ C)
For indoor use only
Relative Humidity: <90% non-condensing
Compatible Controls
Pico wireless control
Lutron Shading Solutions 4-Group RF Remote Control
seeTouch RF keypads
GRAFIK Eye
QS
RadioRA 2
HomeWorks QS
Caséta Wireless Smart Bridge Pro
Specifications
O
Lutron, Sivoia, Triathlon, ClearConnect, Pico, seeTouch, GRAFIK Eye, RadioRA,
Caséta, and HomeWorks are trademarks of Lutron Electronics Co., Inc.,
registered in the U.S. and other countries.
1
3.00 in
(76 mm)
SHADE-WIDTH DEPENDENT
2.70 in
(69 mm)
4.36 in
(111 mm)
SHADE-WIDTH DEPENDENT
3.30 in
(84 mm)
SPECIFICATION SUBMITTAL
Page
Job Name: Model Numbers:
Job Number:
Lutron Automated Roller Shades
085333b 2 08.29.16
Back Cover:
Shade without Fascia:
Total projection varies with
shade height/fabric roll-up
Max = 4.000 in (102 mm)
SHADE-WIDTH-DEPENDENT
SHADE-WIDTH-DEPENDENT
2
SPECIFICATION SUBMITTAL
Page
Job Name: Model Numbers:
Job Number:
Lutron Automated Roller Shades
085333b 3 08.29.16
4.94 in
(125 mm)
4.50 in
(114 mm)
SHADE-WIDTH DEPENDENT
4.94 in
(125 mm)
4.50 in
(114 mm)
SHADE-WIDTH DEPENDENT
Shade with Optional Architectural Fascia:
Shade with Optional Fabric Wrapped Fascia:
SHADE-WIDTH-DEPENDENT
SHADE-WIDTH-DEPENDENT
3
INSIDE MOUNT
OUTSIDE MOUNT ON TRIM
OUTSIDE MOUNT ABOVE TRIM
INSIDE MOUNT
OUTSIDE MOUNT ON TRIM
OUTSIDE MOUNT ABOVE TRIM
INSIDE MOUNT
OUTSIDE MOUNT ON TRIM
OUTSIDE MOUNT ABOVE TRIM
SPECIFICATION SUBMITTAL
Page
Job Name: Model Numbers:
Job Number:
Lutron Automated Roller Shades
085333b 4 08.29.16
Mounting Options
Depending on the window dimensions, the shade can be mounted inside the window frame or outside the window frame.
INSIDE MOUNT
Width: Measure window opening width at top, center and
bottom; provide smallest measurement. Actual shade width
is calculated by Lutron based on window measurements
provided. Available: 20.5 in (546 mm) to 144 in (3658 mm)
Height: Distance from the top of the mounted Back Cover to
the shade's lower limit; typically at the window sill.
Recess: Without optional fascia - The window jamb must be
at least 4 in (102 mm) deep to fully recess the shade,
including the maximum fabric roll-up size. (See the previous
page for more information about shade profile dimensions.)
With optional fascia - The window jamb must be at least 4.5
in (114 mm) deep to fully recess the shade and the fascia.
OUTSIDE MOUNT ABOVE TRIM
Width: Any width from 20.5 in (546 mm) to 144 in (3658 mm).
Height: Distance from the top of the mounted Back Cover to
the shade's lower limit; typically at the window sill.
Clearance: Depending on the size of the shade and the
depth of the trim, or the roll direction of the shade, it may be
possible to mount the shade above the trim without spacing
the back cover off the wall.
In this arrangement, the top of the back cover must be a
minimum of 5
1
/4 in (133 mm) above the top of the trim, as
shown above.
NOTE: Optional fascia not available with reverse roll.
OUTSIDE MOUNT ON TRIM
Width: Any width from 20.5 in (546 mm) to 144 in (3658 mm).
Height: Distance from the top of the mounted Back Cover to
the shade's lower limit; typically at the window sill.
5.25 in
(133 mm)
min.
Wall
Regular
roll
Reverse
roll
Trim
4
Input Voltage: 120-240 V~
Max. input current: 1.5 A
Operating frequency: 50/60 Hz
Output Voltage: 12 V
Output Current: 5 A
ESD Protection: (+/-) 16 kV
Line voltage
Up to 10
power
outputs
Power panel*
10-output power supply,
CSPS-P1-10-6 available separately.
* Secondary wiring must be of type CL2, CL2P, CL2R, CL2X or other cable with equivalent or better electrical, mechanical, and
ammability ratings in accordance with local and national electric code.
SPECIFICATION SUBMITTAL
Page
Job Name: Model Numbers:
Job Number:
Lutron Automated Roller Shades
085333b 5 08.29.16
Plug-in power supply
Available separately.
12 in (305 mm) cord with
barrel connector.
(Shades ordered with wired
power include a compatible
15 ft (4.5 m) power wire.)
CSPS-P1-1-6-WH =
CSPS-P2-1-6-WH = CSPS-P3-1-6-WH =
Battery power
Batteries are not included.
D-Cell Alkaline batteries required.
Quantity varies with shade size and mounting confi gration.
Shade Width Batteries Required
20
1
2 in (521 mm) to 25
15
16 in (659 mm) 6 D-Cell Alkaline
26 in (660 mm) to 37
9
16 in (954 mm) 8 D-Cell Alkaline
with Battery Boost Option
37
5
8 in (956 mm) to 47
1
16 in (1195 mm) 8 D-Cell Alkaline 12 D-Cell Alkaline
47
1
8 in (1197 mm) to 144 in (3658 mm) 8 D-Cell Alkaline 16 D-Cell Alkaline
Power Options
NOTES: The width ranges and battery requirements shown above are for an outside-mount shade without fascia. Range thresholds
for other mounting/fascia combinations may vary by +/-
1
4 in (6 mm). If your inside-mount or fascia-equipped shade width is within
1
4 in (6 mm) of a threshold shown, you may contact Lutron Customer Service for assistance determining exact battery requirements.
Battery Boost option is available for shades wider than 37
5
8 in (956 mm). The Battery Boost feature adds a second battery holder for
extended battery life in larger shades, high-use applications, or locations where RF signal traf c is particularly high.
To maintain performance specifi cations in buildings with 20 or more Lutron Radio Powr Savr Sensors, Lutron recommends powering
shades with a wired power supply.
5