Fillable 369922 SALTO (Lutron Electronics, Inc.)

Fill Online, Printable, Fillable, Blank 369922 SALTO (Lutron Electronics, Inc.) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369922 SALTO (Lutron Electronics, Inc.)

On average this form takes 5 minutes to complete

The 369922 SALTO (Lutron Electronics, Inc.) form is 3 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 21 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LMR-SALTO-PR Software LicenseLutron
369922c 1 01.08.19
Features
Guest Presence Detection
The door’s state (open/closed) is used in conjunction
with in-room motion sensor(s) and control buttons to
detect if someone is present in the room.
Occupant Differentiation
When the door is unlocked with a valid key, a
differentiation is made between a first-time guest
entry, a guest entry, and a staff entry.
Energy Saving
When the door is opened/closed, the room is
scanned for motion and checked for button presses
to determine if it is still occupied.
Thirty minutes (programmable) after the door closes,
if no motion or button activity is detected, the room’s
thermostat, drapery, and lighting settle into an
energy-saving state.
Thermostat Programming
The room’s thermostat can be programmed to return
from the energy-saving mode to normal operation
when the door of an unoccupied (no person present)
room is opened.
The LMR-SALTO-PR interface software enables integration between Lutron myRoom plus systems and the
SALTOR online door lock system. Door lock events are sent from the SALTOR system to the myRoom plus system
to enable advanced control of the room’s thermostat, drapery, and lighting.
Normal Operation
If motion or button activity is detected in an
unoccupied room, the room thermostat can be
programmed to return from the energy-saving mode
to normal operation.
Turn on room lighting automatically when a guest
opens the door
Automatic lighting control can be achieved without a
door contact installed.
Activate a first-arrival “Welcome” setting in the
room for the guest
The guestroom’s thermostat, drapery, and lighting
can be preset to a “Welcome” setting, activated by
the check-in message received from the hotel’s
Property Management System (PMS). An additional
license is required, such as LMR-OPERA-PR for an
OperaT PMS.
LMR-SALTO-PR SALTOR Systems Door Lock
Interface Software License for Lutron myRoom plus
Summary of Guest Presence Features
Thermostat Lights Shades
Exiting a room using a SALTOR system can trigger a
programmed event to adjust:
Yes Yes Yes
Entering a room using a SALTOR system can trigger a
programmed event to adjust:
Yes Yes Yes
Entering a room using a SALTOR system can trigger
different events based on guest or staff entry to adjust:
Yes Yes Yes
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LMR-SALTO-PR Software LicenseLutron
369922c 2 01.08.19
Concept of Operation
• TheLutronmyRoomplusserverisinterfacedwiththe
SALTOR server via a server-to-server interface.
• TheSALTOR system wireless gateway, typically
located above an access panel in the corridor,
is connected to the hotel’s network so it can
communicate with the SALTOR system server.
Refer to the following numbered event sequence in
the diagram below.
1. The guestroom’s door lock communicates with the
SALTOR system wireless gateway.
2. The wireless gateway relays the message to the
SALTOR system server via the hotel network.
3. The server sends door-event messages to the
Lutron myRoom plus system server via the
SALTOR Event StreamT interface.
4. The myRoom plus server software interprets the
SALTO event message and then routes a Lutron
message via the hotel network to the myRoom
plus guestroom control unit (GCU-HOSP) located
in the guestroom where the door-event message
originated.
5. The myRoom plus GCU-HOSP controls the
room’s thermostat, drapery, and lighting as
programmed.
Typical System Diagram
Door Lock
Wireless message
Message sent over hotel network
Message sent over hotel networkMessage sent over hotel network
Lighting
Drapery
Thermostat
Door Lock Door Lock
SALTOR System
Wireless Gateway
Lutron
myRoom plus
Lutron
myRoom plus
Lutron
myRoom plus
Hotel Network: Wired Ethernet Cat 5/6 Cable
Hotel Room Hotel Room Hotel Room
Lutron myRoom plus
System Server
SALTOR System
Server
Server-to-server interface
2
43
1
5
®
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LMR-SALTO-PR Software LicenseLutron
369922c 3 01.08.19
SALTOR Systems Requirements
The Lutron myRoom plus system is compatible with
all wireless SALTO access control systems that
operate using either the SALTOR ProAccess SPACET,
SALTOR HAMST, or SALTOR ProAccessT software via
the SALTOR Event StreamT interface.
SALTOR is responsible for the complete design,
installation, start-up, and maintenance of all system
components necessary for their wireless online
door-lock system to operate. This includes, but is not
limited to, the following:
• Electronicdoorlockswiththerequiredonline
hardware installed.
• Wirelessgatewaysthatallowthedoorlocksto
communicate over the hotel network.
• CoordinatingtherequiredwiringforallSALTOR
equipment.
• SALTOR ProAccess SPACET version 1 or above,
SALTOR HAMST version 11 or above, or SALTOR
ProAccessT version 12 or above.
• Serverhardwareorenvironmentforhostingthe
SALTOR software.
• SALTOR Event StreamT interface version 1.3 or above
on the SALTOR server to allow communication to the
Lutron myRoom server.
Lutron System Requirements
Only the Lutron myRoom plus system is compatible
with the SALTOR door lock system.
The Lutron myRoom plus system BOM must include
the following:
• LMR-VSBO:myRoomserverbyothersor
LMR-CMP-R: myRoom plus server by Lutron.
• LMR-SALTO-PR:myRoomplus-SALTOR interface
software licenses; one license required per
guestroom.
• LMR-EO:myRoomplusnetworkingrequirements.
Network Requirements
To ensure acceptable end-to-end system response
time and a positive guest experience, the hotel
network must meet the following requirements:
• TheLutronserverandallGCU-HOSPunitsmust
sharethesamesubnetonadedicatedVLAN.
• TheSALTOR server and all SALTOR wireless gateways
mustsharethesamesubnetonadedicatedVLAN.
• TCPcommunicationmustbeallowedonthe
corresponding, configured port from the Lutron
myRoom plus server to the SALTOR server.
Commissioning Requirements
• LutronshallbeprovidedwiththeIPandportfrom
which the SALTOR server will be communicating.
• Lutronshallbeprovidedwiththeexact,
commissioned names for all SALTOR system door
locks.
• Roomautomationusingdoorlocksystem
integration requires a fully commissioned door lock
system, servers (Lutron and SALTOR), and network
infrastructure.
Mock-Up Demonstration Requirements
If integration with the SALTOR door locking system
must be demonstrated for a hotel mock-up room
review, it will require close coordination between the
local Lutron and SALTOR sales, project management,
and start-up teams. The SALTOR wireless gateway,
the SALTOR server, and the Lutron myRoom plus
server all need to be included in the mock-up.
)Lutron and Lutron are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries.
myRoom is a trademark of Lutron Electronics Co., Inc.
SALTO, ProAccess, ProAcess SPACE, Event Stream, and HAMS are trademarks of Salto Systems, S.L.
Opera is a trademark of MICROS Systems, Inc.
3
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369922 SALTO (Lutron Electronics, Inc.)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 19 July 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document