Fillable 369964 Lutron Tamper Resistant, Self-Testing GFCI Receptacles SPEC (369964)

Fill Online, Printable, Fillable, Blank 369964 Lutron Tamper Resistant, Self-Testing GFCI Receptacles SPEC (369964) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369964 Lutron Tamper Resistant, Self-Testing GFCI Receptacles SPEC (369964)

On average this form takes 9 minutes to complete

The 369964 Lutron Tamper Resistant, Self-Testing GFCI Receptacles SPEC (369964) form is 5 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 35 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron® GFCI – Tamper Resistant, Self-Testing Receptacles
369964a 1 08.13.15
Lutron® Tamper Resistant, Self-Testing
GFCI Receptacles
Features
• Continuous self-test functionality – disconnects power to
receptacle if critical components are damaged and GFCI
protection is lost – providing “continuous self-testing”
that initiates within 2.5 seconds and is a continuous
cycle every 30 seconds or less.
• Three provisions for providing protection:
- Continuous electronic sensing, testing and evaluation
utilizing diagnostic software located on the printed
circuit board.
- Traditional testing mode by manually operating the
“test and reset” buttons utilizing a supervisory circuit as
specified in UL 943 section 5.15.
- Auto-sensing mode for immediate interruption for a
ground fault condition for Class A protection
(4 – 6 mA).
• Manual Test – this design incorporates a full system test
function. The GFCI, when manually tested, induces a
simulated ground fault leakage current to the printed
circuit board. This in turn causes the mechanical system
to react based on the action of the solenoid. The entire
mechanical and electronic GFCI system is reviewed for
functionality.
• Reverse wire safety feature – if wired incorrectly there will
be no power to the face or to downstream receptacles
for added safety.
• Clear visual indication of GFCI status —
LED indicating lights:
- Green LED (power to the device)
- Red LED (trip condition/ground fault condition)
- Flashing Red LED (end of life)
• Permanently installed internal tamper-resistant shutter
mechanism capable of resisting insertion of foreign
elements into the device.
• Internal back wiring clamp and guide pocket — quick
and dependable termination.
• Receptacle face compatible with NEMA designer and
NovaT*
® designer-opening wallplates.
• Compliant with NEC
® 406.12 and NEC® 517-18(c).
Models Available:
15 A
CAR-15-G FST-XX 15 A 125 V~ 60 Hz
SCR-15-GFST-XX 15 A 125 V~ 60 Hz
NTR-15- GFST-XX 15 A 125 V~ 60 Hz
20 A
SCR-20-GFST-XX 20 A 125 V~ 60 Hz
NTR-20-GFST-XX 20 A 125 V~ 60 Hz
(XX in model number represents color/finish code)
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron® GFCI – Tamper Resistant, Self-Testing Receptacles
369964a 2 08.13.15
Specifications
Regulatory Approvals
• Meets UL 943 Class A GFCIs and UL 498 for
Receptacles
• Complies to NEC, CEC & OSHA, UL File E-41978,
CSA File LR-24886
• UL Listed
• CSA Certified
• NOM Certified
• UL 943 Dust Test: Meets performance requirement
section 6.20 UL 943 GFCI
Power
• 15 A & 20 A, 125 V~ (102 V~ – 132 V~) 60 Hz
• Exceeds immunity level of 0.5 V over a frequency
range of 150 kHz to 230 MHz
Electrical
• Trip Level: 4 – 6 mA
• Trip Time: .025 seconds (nominal)
• Frequency: 60 Hz
• Max Interruption: 10,000 A
Environmental
• Operating Temperature: -35 °C to 66 °C
(-30 °F to 150 °F)
• Maximum Humidity: 95%
Emissions
• Compliant for radiated emissions 30 – 1000 MHz
• Compliant for conducted emissions 150 kHz –
30 MHz
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron® GFCI – Tamper Resistant, Self-Testing Receptacles
369964a 3 08.13.15
Dimensions
Front View
NTR- models (with NovaT*® wallplate) CAR- and SCR- models (with Claro® wallplate) Bulk unit
Side View Rear View
all models all models
4.56 in
(116 m m)
4.69 in
(119 m m)
3.28 in
(83.3 mm)
2.75 in
(70 mm)
2.94 in
(75 mm)
1.75 in
(44.5 mm)
1.10 in
(27. 8 m m )
1.47 in
( 37. 3 m m)
2.78 in
(70.6 mm)
3
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron® GFCI – Tamper Resistant, Self-Testing Receptacles
369964a 4 08.13.15
A: One cable entering the box OR B: Two cables entering the box
LINE cable brings
power to the GFCI
Grounding connection
to box (if box has a
grounding terminal)
Wire
connector
LINE cable brings
power to the GFCI
Wire
connector
Grounding connection
to box (if box has a
grounding terminal)
Electrical
box
LOAD
cable feeds
power to other
receptacle(s)
About wire connections
Clockwise, 2/3 of the way
around the screw
Wire
1 in
Wire
5/8 in
Insert wire to the
bottom of hole and
tighten down screw
Side Wire
Back Wire
About wire connections
Clockwise, 2/3 of the way
around the screw
Wire
Wire
Insert wire to the
bottom of hole and
tighten down screw
Side Wire
Back Wire
Electrical box
Yellow sticker
remains in
place to cover
the LOAD
terminals
(16 mm)
(25.4 mm)
1 in
(25.4 mm)
5/8 in
(16 mm)
Wiring Diagrams (choose one or the other)
Mounting
TEST
TEST
RESET
RESET
4
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Lutron® GFCI – Tamper Resistant, Self-Testing Receptacles
369964a 5 08.13.15
Colors and Finishes
Gloss Finishes Satin Finishes
Taupe
TP
Turquoise
TQ
Plum
PL
Merlot
MR
Terracotta
TC
Sienna
SI
Midnight
MN
Hot
HT
Desert Stone
DS
Eggshell
ES
Biscuit
BI
Snow
SW
Palladium
PD
Greenbriar
GB
Bluestone
BG
Mocha Stone
MS
Goldstone
GS
Stone
ST
Limestone
LS
White
WH
Ivory
IV
Almond
AL
Light Almond
LA
Gray
GR
Brown
BR
Black
BL
• Due to printing limitations, colors
and finishes shown cannot be
guaranteed to perfectly match
actual product colors.
• Color chip keychains are available
for more precise color matching:
Gloss Finishes: DG-CK-1
Satin Finishes: SC-CK-1
5
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369964 Lutron Tamper Resistant, Self-Testing GFCI Receptacles SPEC (369964)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 9 May 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document