SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Diva® 0-10V Control Wallbox Controls
369-147 1 08.12.09
Diva® 0-10V Control
The designer dimmer that matches your
paddle switches.
Features
Large paddle switch with a captive linear-slide
dimmer for a standard designer wallplate opening.
Uses low-voltage wiring for easy installation in
any home.
• Coordinating Claro
® and Satin Colors® wallplates.
(available separately)
High-end and low-end trim user adjustable for
optimal performance.
Available Model Numbers:
DVTV-XX - Gloss Finish
DVSCTV-XX - Satin Colors
Select light
level with slider
Switch on to
selected light
level/off
Standard Wallplates
1-Gang CW-1-, SC-1-
2.94 in W (75 mm) x 4.69 in H (119 mm)
x 0.30”D (7.6 mm)
2-Gang CW-2-, SC-2-
4.75 in W (121 mm) x 4.69 in H (119 mm)
x 0.30 in D (7.6 mm)
3-Gang CW-3-, SC-3-
6.56 in W (167 mm) x 4.69 in H (119 mm)
x 0.30 in D (7.6 mm)
4-Gang CW-4-, SC-4-
8.37 in W (213 mm) x 4.69 in H (119 mm)
x 0.30 in D (7.6 mm)
5-Gang CW-5-, SC-5-
10.18 in W (259 mm) x 4.69 in H (119 mm)
x 0.30 in D (7.6 mm)
6-Gang CW-6-, SC-6-
12.00 in W (305 mm) x 4.69 in H (119 mm)
x 0.30 in D (7.6 mm)
The Diva 0-10V preset dimmer provides dimming
control of 0-10V LED drivers, fl uorescent ballasts and
HID ballasts.
1
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Diva® 0-10V Control Wallbox Controls
369-147 2 08.12.09
Specifi cations
Power
Control: 0-10 V
30 mA
Switch: 24 V
100 mA
Performance
• Power-failure memory.
Electrostatic discharge tested.
Enviroment
For Indoor Use Only.
Operating Temperatures 0 °C (32 °F) to 40 °C (104 °F).
Wiring Diagrams
Dimming With ON/OFF Control
Wiring Diagram Using Relay
0-10 V Ballast/Driver
White
White
Red
Red
Red /
White
Blue
Gray
GrayGray
RedRed
Purple
PurplePurple
WhiteBlue
BlackBlack
0-10 V Ballast/Driver
Neutral
Hot / Live
120 / 230 / 277 / 347 V~ 50 / 60 Hz
PP-120H /
230H /
277H /
347H
Class 2 Only
Black
Black
Dimming With ON / OFF Control For Drivers Which Support
Dim To OFF Capability
Power Wiring Not Shown—See Lighting Device For Wiring
0-10 V Ballast/Driver
Gray
Purple
Blue
Red/White
Red
0-10 V Ballast/Driver
Application Requirements
No derating required if ganged.
A physical barrier (partition) must exist when
ganging with line-voltage products.
Precise color matching.
Night Light not available.
Provides 0-10V sinking control for 0-10V fl uorescent
ballasts and LED drivers.
Compatible with all fl uorescent ballasts and LED
drivers compliant to IEC 60929 Annex E.2.
2
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Diva® 0-10V Control Wallbox Controls
369-147 3 08.12.09
Dimensions Standard Colors and Finishes
Gloss Finishes
Add color suf x to model # Example: DVTV-WH
WH White
IV Ivory
AL Almond
LA Light Almond
GR Gray
BR Brown
BL Black
Satin Colors
®
Add color suf x to model # Example: DVSCTV-SW
HT Hot
MR Merlot
PL Plum
TQ Turquoise
SG Sea Glass
TP Taupe
ES Eggshell
BI Biscuit
SW Snow
PD Palladium
MN Midnight
TC Terracotta
SI Sienna
GB Green Briar
BG Bluestone
MS Mocha Stone
GS Goldstone
DS Desert Stone
ST Stone
LS Limestone
4.69 in
(119 mm)
2.94 in
(75 mm)
2.75 in
(70 mm)
0.30 in
(7.6 mm)
1.31 in
(33 mm)
3