Fillable C5-XPJ-16A EcoSystem Switching Power Module for Non-Dim Loads SPEC (369409)

Fill Online, Printable, Fillable, Blank C5-XPJ-16A EcoSystem Switching Power Module for Non-Dim Loads SPEC (369409) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

C5-XPJ-16A EcoSystem Switching Power Module for Non-Dim Loads SPEC (369409)

On average this form takes 11 minutes to complete

The C5-XPJ-16A EcoSystem Switching Power Module for Non-Dim Loads SPEC (369409) form is 6 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 42 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem C5-XPJ-16A Switching Power Module
369409d 1 04.07.17
EcoSystem Switching Power Module
for Non-Dim Loads
Lutron EcoSystem Switching Power Module allows
integration of non-dim loads into a Lutron EcoSystem
Bus. The Power Module combines digital commands
and sensor data to control the load.
Features
•Capableofswitching16Aofhighin-rushlighting
load (LED, magnetic fluorescent ballast, electronic
fluorescent ballast, incandescent, magnetic low-
voltage, electronic low-voltage, neon / cold cathode
and motor loads)
•Provides20V-powerforandrespondstoone
occupantsensor,oneEcoSystem daylight sensor,
andoneEcoSystempersonalcontrolinput(infrared
receiver or wallstation)
•Communicatesstatusandsensorlevelsoverthe
EcoSystem Bus
•Universalvoltageinput:100to277V~50/60Hz
•Non-volatile(EEPROM)memorystoresspecic
systeminformationfor10yearsfrompowerdownto
powerrestored
•100%performancetestedatfactory
Note:FrequentswitchingofHIDloadsmayaffectthe
lifetimeofthelampsorballasts.Pleasecontactthe
lamporballastmanufacturersformoreinformation
aboutcompatibilitywithHIDloads,especiallywhen
usedwithoccupancysensors.
EcoSystem One-Line
1
2
3
4
5
6
7
8
Non-DimLoad
Wallstation
EcoSystem Bus
EcoSystem
Ballast
Lighting
Remote
Occupancy
Sensor
Daylight
Sensor
EcoSystem
Ballast
EcoSystem
Ballast
EcoSystem
Switching
Power Module
EcoSystem
BusSupply*
IRReceiver
To additional ballasts
andmodules(upto
64total)
*DoesnotcountasoneoftheballastsormodulesontheEcoSystemBus.ThebussupplycanbeanEnergiSavrNodeunitorcanbe
located in a Quantum hub.
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem C5-XPJ-16A Switching Power Module
369409d 2 04.07.17
Specifications
Regulatory Approvals
•UL
®916ListedandCSA184Certied
•MeetsANSIC62.41CategoryAsurgeprotection
standardsuptoandincluding6000V~
•ManufacturingfacilitiesemployESDreduction
practicesthatcomplywiththerequirementsof
ANSI/ESDS20.20
•LutronQualitySystemsregisteredto
ISO9001.2000
•NOM
•Complieswithrequirementsforuseinotherspaces
usedforenvironmentalair(plenums)per
NEC
®2014300.22(C)(3)
•MeetstheCanadianNationalBuildingCodeplenum
requirementsforaconcealedspaceusedasa
plenumwithinaoororroofassembly
•Forcommercialuse,ClassAonly
Power
•OperatingVoltage:100to277V~50/60Hz
•OutputRating:16ASoftswitchmaximumnon-dim
load
•IECPELV/NEC®Class2SensorPower:20V-
50mAmaximum
Switchable Load Types
•LED
•Magneticuorescentballast
•Electronicuorescentballast
•IncandescentandHalogen
•Magneticlow-voltagetransformer
•Electroniclow-voltagetransformer
•NeonorColdCathode
•MotorLoads
-1/4HPat100to120V~
-1/2HPat200to277V~
Note:Donotusetoswitchreceptacles.
Environment
•AmbientTemperatureOperatingRange:32ºFto
104ºF(0ºCto40ºC)
•Relativehumidity:lessthan90%non-condensing
•Forindooruseonly
Module Wiring (see Wiringpagesforwiringdiagrams)
•Terminalblocksacceptwiresofthefollowingsize:
EcoSystem
Bus(E1,E2):
-22AWGto12AWG(0.5mm
2
to2.5mm
2
) solid wire
IEC
P E LV / N E C ®Class2Sensors:
-22AWGto12AWG(0.5mm
2
to2.5mm
2
)
solid wire
•Wiringbetweenmoduleandloadis3conductors:
SwitchedHot
Neutral
Ground
•Wiringbetweenmoduleandsensorsshallnot
exceedmanufacturer’sspecications.
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem C5-XPJ-16A Switching Power Module
369409d 3 04.07.17
Dimensions
Alldimensionsshownasin(mm)
C5-XPJ-16A
C5-XPJ-16A
Junctionbox
CEILING
Mounting
•MounttheEcoSystemSwitchingModuleontoa
4inx4in(102mmx102mm)standard(1900)
junctionbox(notincluded,butavailable;
LutronP/N241496)
•Mountonaverticalorhorizontalsurface;allpower
wireconnectionswillbemadeinthejunctionbox;all
EcoSystembuswiring(NEC®Class1or
IEC
P E LV / N E C ® Class2)andsensorwiring
(IEC
P E LV / N E C ®Class2only)connectionswillbe
made within the front cover of the unit
•MountinalocationwherethePWRandSTAT
indicators are visible
•Alleld-installedIEC P E LV / N E C ®Class2wiring
mustbeseparatedfromlinevoltagewiringbyat
least0.25in(6.4mm)
•Somelocalelectricalcodesrequire
IECP E LV / N E C ®Class2wiringtobeseparately
routed in a metal conduit
Electrical Contractors and Engineers
B
A
WALL
7. 8
(200)
5.0
(130)
2.5
(64)
3
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem C5-XPJ-16A Switching Power Module
369409d 4 04.07.17
•Connecttheinputfeedwiresandtheoutputload
wires to the module as indicated in the wiring
diagrams below
Wiring
EcoSystem Power Module Line Voltage Wiring
Distribution
Panel
Non-DimLoads
Non-DimLoads
FixtureGround
FixtureGround
Green*
Green*
White*
White*
Black*
Black*
Green(ground)*
White(neutral)*
Red(switchedhot)*
Green*
White*
Black*
Ground
Neutral
Line/Hot
C5-XPJ-16A
*ColorsindicatethemoduleandLutronballastwirecolorsand/orLutronballastterminalcolors
EcoSystem Power Module
Green
White
Red
Black
4
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem C5-XPJ-16A Switching Power Module
369409d 5 04.07.17
Wiring (continued)
EcoSystem Bus Wiring
•WiretheEcoSystemBustotheE1andE2terminals
on the front of the module.
•WhentheEcoSystem BusiswiredasNEC®Class1,
thebuswiringmustentertheleftsideknockoutand
maintain0.25in(6mm)spacingfromthe
IEC
P E LV / N E C ® Class2sensorwiring.
•WhentheEcoSystem BusiswiredIEC P E LV / N E C ®
Class2,thebuswiringmayentereitherknockouton
the low voltage wiring area.
EcoSystem Bus Details
•E1andE2wiresarenotpolaritysensitive
•BuslengthislimitedbythewiregaugeusedforE1
andE2asfollows:
Wire Gauge (solid wire) Bus Length (max)
12AWG(4.0mm
2
) 2200ft(671m)
14AWG(2.5mm
2
) 1400ft(427m)
16AWG(1.5mm
2
) 900ft(274m)
18AWG(1.0mm
2
) 570ft(174m)
E1-Purple
E2-Purple/White
To additional EcoSystem
modules, ballasts, and the
EcoSystem Bus
wiringknockout
E1
E2
E1
E2
IECPELV/NEC®Class
2wiringknockout
NOTE: See Specificationspageforwiringspecifications
Lutron,Lutron,Quantum,Softswitch,andEcoSystemaretrademarksofLutronElectronicsCo.,Inc.registeredintheU.S.andothercountries.
EnergiSavrNodeisatrademarkofLutronElectronicsCo.,Inc.
5
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem C5-XPJ-16A Switching Power Module
369409d 6 04.07.17
Wiring to IEC PELV / NEC® Class 2 Sensors
•WirecolordesignationsoftheIEC P E LV / N E C ®Class
2Terminals:
Red= 20V-
Black= Common
White= IR(wallstation/IRreceiver)
Blue= OccupancySensor
Yellow= DaylightSensorSignal
•Wiringbetweenmoduleandsensorsshallnotexceed
manufacturer’sspecications.
•Makesurethatthesupplybreakertotheswitching
powermoduleisOFFwhenwiring.
Note:ThemoduleacceptsonlyoneIRInput.Useof
theIRoutputfromtheEcoSystem Daylight Sensor
precludestheuseofanIRreceiverorwallstation
with the module. When both a daylight sensor and
wallstation/IRreceiverarewiredtothesamemodule,
theIRwirefromthedaylightsensorshouldnotbe
connected.
Wiring (continued)
Low Voltage Wiring IEC PELV / NEC® Class 2 Sensors
EcoSystem Daylight Sensor
Wired to Module
OccupantSensorWiredtoModule
EcoSystem Daylight
Sensor and Wallstation
wired to the module
(IRwiredonlytokeypad)
IEC PELV/NEC®
Class2wiring
knockout
White
Red
Black
White
Red
Yellow
Black
Red
Blue
Black
NOTE: See Specificationspageforwiringspecifications
Yellow
6
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

C5-XPJ-16A EcoSystem Switching Power Module for Non-Dim Loads SPEC (369409)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 8 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document