Fillable 369675a ENG 369675 PowPak Dimming Module with EcoSystem for Japan

Fill Online, Printable, Fillable, Blank 369675a ENG 369675 PowPak Dimming Module with EcoSystem for Japan Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369675a ENG 369675 PowPak Dimming Module with EcoSystem for Japan

On average this form takes 12 minutes to complete

The 369675a ENG 369675 PowPak Dimming Module with EcoSystem for Japan form is 7 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 49 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
PowPak® Dimming Module Energi TriPak® Series Wireless Lighting Control
369-675b 1 09.05.12
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
PowPak® Dimming Module
with EcoSystem
® for Japan
The PowPak® Dimming Module with EcoSystem® is a
radio frequency (RF) control that operates up to
32EcoSystem
® LED drivers based on input from Pico®
controls and Radio Powr Savr
™
sensors. Configurable
for multiple zones in a single area, the Dimming Module
with EcoSystem
® is ideal for small areas such as
classrooms, conference rooms, and private offices.
Communication with RF input devices, such as Pico
®
controls and Radio Powr Savr
™
sensors, is accomplished
using Lutron Clear Connect
® RF Technology.
Features
•Controlsupto32EcoSystem
® LED drivers
•ReceivesinputfromuptoninePico
® controls, six
Radio Powr Savr
™
occupancy/vacancy sensors, and
one Radio Powr Savr
™
daylight sensor
•UtilizesLutronClearConnect
® RF Technology – refer to
model number chart below for frequency band data
•Mountstoajunctionboxthroughastandard21.7mm
knockout
Model Number Operating Voltage Frequency Band Region
RMP-ECO32-JA-B 100 V ~ 50/60 Hz 312.3 – 314.8 MHz Japan
RMP-ECO32-200-JA 200 V~ 50/60 Hz 312.3 – 314.8 MHz Japan
NOTE: Contact Lutron for frequency band compatibility for your geographic region if it is not indicated above.
1
PowPak® Dimming Module Energi TriPak® Series Wireless Lighting Control
369-675b 2 09.05.12
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Specifications
Power
•Operatingvoltage:
100 V ~ 50 / 60 Hz 40mA
System Communication
•OperatesusingClearConnect® RF Technology for
reliable wireless communication; refer to model
number chart on page 1 for frequency band details
•RFrangeis7m
Environment
•Ambientoperatingtemperature:0°Cto40°C
•0%to90%humidity,non-condensing
•Forindooruseonly
EcoSystem
® Link
•Communicateswithupto32EcoSystem
® enabled
LED drivers
•EcoSystem
® Digital Link can be wired Class1 or
Class2 for maximum wiring flexibility
•Terminalsaccept0.75 to 1.5 mm
2
(18 to 16 AWG)
solid wire
NOTE: The PowPak
® Dimming Module with EcoSystem®
does NOT support the C5-XPJ-16A switching module.
NOTE: Wired sensors connected to EcoSystem
®
devices are NOT supported.
Default Operation
•Associatedwirelessinputdevicescontrolall
connected EcoSystem
® LED drivers
•OccupancySensors:
–Occupied:100%;Unoccupied:0%(OFF)
•Pico
®Controls:
–On:100%;FavoriteLevel:50%;Off:0%(OFF)
•DaylightSensor:Decreaseselectriclightinresponse
to additional available daylight
Key Design Features
•LEDstatusindicatorsshowcommunicationstatusand
provide programming feedback
•Powerfailurememory:Ifpowerisinterrupted,
connected loads will return to the previous level prior
to interruption
•EcoSystem
® link miswire protection up to 347 V ~
•Daylightoverride:Pressingtheraisebuttononan
associated Pico
® will temporarily override daylighting
for the fixtures in that Pico
® group
– Daylighting will be re-enabled for that Pico
® group
whenoneofthefollowingoccurs:
•Twohourshavepassedsincetheoverride.*
•ON,OFForPresetbuttonhasbeenpressedona
Pico
® controlling that group.
•AllassociatedOccupancySensorshavereported
unoccupied.
* Eachtimeadaylightingoverrideoccursforany
Pico
® group, the two hour timer is reset.
2
PowPak® Dimming Module Energi TriPak® Series Wireless Lighting Control
369-675b 3 09.05.12
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
System Diagram
Test
Lutron® LED
Drivers
Lutron® LED
Drivers
Upto32
EcoSystem®
LED drivers
Radio Powr Savr
™
Occupancy Sensor (up to 6)
Radio Powr Savr
™
Daylight Sensor (up to 1)
Pico
® Control (up to 9)
EcoSystem
® digital link
Wiring Diagram
100 V~ 200 V~
HOT
NEUTRAL
GROUND
E1
E2
To LED Drivers
Junction Box
Green
White
Black
LIVE 1
LIVE 2
GROUND
E1
E2
To LED Drivers
Junction Box
Green
Red
Black
From
2-pole
circuit
breaker
[
3
PowPak® Dimming Module Energi TriPak® Series Wireless Lighting Control
369-675b 4 09.05.12
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wiring Diagram
Input Voltage
To LED drivers
Conduit
Nut
White
(Neutral)
Black
(Hot)
Green
(Ground)
E2
E1
NOTE: Use0.75to1.5mm
2
(18 to 16AWG)
solid wire.
Please use 1.6 mm
2
or 2.0 mm
2
diameter copper wire.
Strip off 10 mm of the insulated coating on the wire and
straighten the wire if it bends.
Shown,
actual size
1
2
3
10 mm
1
2
3
4
PowPak® Dimming Module Energi TriPak® Series Wireless Lighting Control
369-675b 5 09.05.12
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
PowPak®InstallationInsideJunctionBox
(Dimming Module RMP-ECO32-JA-B shown)
Antenna
BOX ABOX B
Insomeapplications,aPowPak®modulecanbeinstalledinsideajunctionbox.
A) Remove the label tab by tearing at the perforation.
B) Lift the flexible antenna on the PowPak® module from the cutout on the right side of the antenna trough.
C) Extend the antenna out from the left side of the PowPak® as indicated.
+
-
+
-
+
-
+
-
Remove label tab
at perforations
Lift out
antenna
here
A
B
C
Extend
antenna
here
Mounting within a Junction Box
5
PowPak® Dimming Module Energi TriPak® Series Wireless Lighting Control
369-675b 6 09.05.12
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Dimensions
Dimensionsareshownas:mm
Range Diagram
100.1
71.6 31.8
86.9
All Wireless Transmitters must be installed within
7 m of the PowPak® Dimming Module.
Test
7 m
Maximum
12 m
10 m
PowPak®
Dimming Module
Installincenterofroomto
maximize RF coverage.
Pico®
Wireless
Transmitter
•ContactLutronrstforapplicationsusingfoil-backedormetallicceilingtiles.
21.7 mm
diameter
Radio Powr Savr
™
Occupancy Sensor
6
PowPak® Dimming Module Energi TriPak® Series Wireless Lighting Control
369-675b 7 09.05.12
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Advanced Configurations
Pico® Wireless Controls
•UptoninePico
® devices, each with their own control
group
•Eachgroupcanincludeanyoftheconnecteddrivers
•FavoritelevelscanbesetforeachPico
® wireless control
Radio Powr Savr
™
Daylight Sensor
•Uptotwodaylightingrowscanbecongured
•TheRadioPowrSavr
™
daylight sensor group can
include up to 32 drivers
Minimum Light Level Setting (optional)
•Certainapplications,suchashallways,mayrequire
that the lights never turn off. For these areas, select
the10%minimumlightleveloption.
Window
Pico® group 1
Pico®
group 1
Pico®
group 2
Pico
®
group 3
Occupied
Unoccupied
Pico® group 2
Pico
® group 3
Window
Window
Off or at 10% Off or at 10%
On Unaffected
Window
Daylighting Row 1
Daylighting Row 2
Test
Test
Window
Pico® group 1
Pico®
group 1
Pico®
group 2
Pico
®
group 3
Occupied
Unoccupied
Pico® group 2
Pico
® group 3
Window
Window
Off or at 10% Off or at 10%
On Unaffected
Window
Daylighting Row 1
Daylighting Row 2
Test
Test
High-End Trim
•Themaximumlightoutputofconnecteddriverscan
bedecreasedbyupto50%forenergysavingsin
over-lit spaces
•High-EndTrimaffectsallconnecteddriversequally,
and can be configured from the dimming module or
from any associated Pico
®
Radio Powr Savr
™
Occupancy Sensors
•RadioPowrSavr
™
occupancy and vacancy sensors
control all connected drivers
•GroupedPico
®controlscanbeusedtoadjustthe
Occupied levels of drivers that they control from
1%to100%orcanmakethemunaffectedby
Occupancy events
•Vacancyevents(areabecomesunoccupied)turnall
driversofforto10%,ifminimumlightlevelisset
Window
Pico® group 1
Pico®
group 1
Pico
®
group 2
Pico
®
group 3
Occupied
Unoccupied
Pico® group 2
Pico
® group 3
Window
Window
Off or at 10% Off or at 10%
On Unaffected
Window
Daylighting Row 1
Daylighting Row 2
Test
Test
Window
Pico® group 1
Pico®
group 1
Pico
®
group 2
Pico
®
group 3
Occupied
Unoccupied
Pico® group 2
Pico
® group 3
Window
Window
Off or at 10% Off or at 10%
On Unaffected
Window
Daylighting Row 1
Daylighting Row 2
Test
Test
7
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369675a ENG 369675 PowPak Dimming Module with EcoSystem for Japan

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 20 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document