Fillable 369-382 ENG 369382 Int'l EcoSystem H Series

Fill Online, Printable, Fillable, Blank 369-382 ENG 369382 Int'l EcoSystem H Series Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369-382 ENG 369382 Int'l EcoSystem H Series

On average this form takes 21 minutes to complete

The 369-382 ENG 369382 Int'l EcoSystem H Series form is 18 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 84 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
Fluorescent Dimming Ballasts International EcoSystem® H-Series Architectural Dimming
369382d 1 03.21.13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem® H-Series Ballasts
EcoSystem® H-Series digitally addressable ballasts
provide a low-cost, flexible solution for any space in
any application. Architectural dimming to 1% meets
the needs of the most demanding applications.
Individual control with the EcoSystem
® Digital Link
eliminates the need to rewire, reduces design time,
and provides a scalable solution from a small area to
an entire building.
Features
• Continuous, flicker-free dimming from 100% to 1%
for T5, T5HO and T8 lamps
• 100% compatible with all EcoSystem
® controls
• CE-marked; ENEC, InMetro, and CCC Certified
• Registered under the Consumer Protection
Registration Scheme in Singapore
• S-Mark Certified for Argentina
• Compatible with GRAFIK Eye
® QS with EcoSystem®
control units, Energi Savr Node
TM with EcoSystem®
unit and Quantum
® software, allowing for integration
into an existing or planned EcoSystem
® lighting
control solution
• RoHS Compliant
• 100% performance tested at factory
• 100% burned in at factory
• Ballast is protected from miswires of any input
power to EcoSystem
® control lead, or from lamp
leads to each other and/or ground
• Programmed rapid start design preheats lamp
cathodes before applying full arc voltage to ensure
full-rated lamp life while dimming and cycling
• Lamps turn on to any dimmed level without going to
full brightness
• Low harmonic distortion throughout the entire
dimming range maintains power quality
• Frequency of operation ensures that ballast does
not interfere with infrared devices operating between
38kHz and 42kHz
EcoSystem
® H-Series, case type M
30 mm W x 25 mm H x 359 mm L
• Ultra-quiet operation
• End-of-lamp-life protection circuitry ensures safe
operation throughout entire lamp life
• Nonvolatile memory restores all ballast settings after
power failure
1
Fluorescent Dimming Ballasts International EcoSystem® H-Series Architectural Dimming
369382d 2 03.21.13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Specifications
Regulatory Approvals
• Manufacturing facilities employ ESD reduction
practices that comply with the requirements of
ANSI/ESD S20.20
• Registered under the Consumer Protection
Registration Scheme in Singapore
• S-Mark Certified for Argentina
• Lutron
® Quality Systems registered to
ISO9001:2008
IEC
• Safety: IEC 61347-1; IEC 61347-2-3
• Performance: IEC 60929
• EMC-Emissions: CISPR15
• EMC-Immunity: IEC 61547
• EMC-Harmonics: IEC 61000-3-2
CE-Marked; ENEC Certified
• Safety: EN 61347-1; EN 61347-2-3
• EMC-Emissions: EN 55015
• EMC-Immunity: EN 61547
• EMC-Harmonics: IEC 61000-3-2
• Energy Efficiency: EN 50294
InMetro Certified
• Safety: ABNT NBR 14417
• Performance: ABNT NBR 14418
CCC Certified
• Safety: GB 19510.4
• EMC-Emissions: GB 17743
• EMC-Harmonics: GB 17625.1
Environment
• Minimum lamp starting temperature: 10°C
• Relative humidity: less than 90% non-condensing
• Sound Rating: Class A
• Maximum ballast temperature: t
C
= 70°C
Performance
• Dimming Range: 100% to 1% measured relative light
output for T5, T5HO and T8
• Lamp Starting: programmed rapid start
• Lamp Current Crest Factor: less than 1,7
• Lamp Flicker: none visible
• Light Output Variation: constant ±2% light output for
line voltage variations of ±10%
• Lamp Life: average lamp life meets or exceeds
rating of lamp manufacturer
• Power Factor: greater than 0,95
• Standby Power: less than 0,50 W
• Typical Total Harmonic Distortion (THD) less than 10% *
• Frequency of Operation: greater than 42KHz
• Ballast Factor (BF): 1,0 for T5, T5HO and T8 lamps
Dimming Range for T5, T5HO and T8 lamps:
BF Dimming Range (Max/
Min)
Dimming
Ratio
1,0 1,00 / 0,01 100:1
Ballast Wiring & Mounting
• Ballast is earthed to the fixture via a mounting screw
• Ballast and fixture must be earthed
• Ballast mounts using two screws (or sheet metal
feature and one screw) within a fluorescent fixture
• Power and lamp wiring terminals accept one
0,75mm
2
to 1,5mm
2
(18 AWG to 16 AWG) solid
copper wire per terminal
Lamp Seasoning
Prior to dimming lamps, refer to the lamp
manufacturer’s lamp seasoning requirements
Warranty
For warranty information, please see:
www.lutron.com/TechnicalDocumentLibrary/
Ballast%20and%20Driver%20Warranty.pdf
* Typical THD for models EHDT514ME110 and EHDT521ME110 less than 15%.
2
Fluorescent Dimming Ballasts International EcoSystem® H-Series Architectural Dimming
369382d 3 03.21.13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem® H-Series ballasts for T5 Linear Lamps
For proper dimming, all lamps must comply to accepted standards, 14 W (60081-IEC-6520), 21 W (60081-IEC-6530) and 28 W (60081-IEC-6640)
Not for use with Reduced Wattage Lamps
Lamp
Type
Lamp
Watts
(length)
Lamps
per
Ballast
Case
Size
EcoSystem®
H-Series
Input
Voltage
(V~)
Input
Current
(A)
Ballast
Factor
(BF)
Input
Power
(W)
System
Lumens*
(lm)
System
Efficacy*
(lm/W)
Ballast
Efficacy
Factor
(BEF)
Relative
System
Efficacy
(RSE)
T5 Linear 14 W
(549 mm)
1 M EHD T514 ME 1 10 220
240
0,09
0,08
1,00
1,00
19,8
19,2
1 350
1 350
68
70
5,05
5,21
0,71
0,73
2 M EHD T514 ME 2 10 220
240
0,16
0,15
1,00
1,00
35,2
36,0
2 700
2 700
77
75
2,84
2,78
0,80
0,78
21 W
(848 mm)
1 M EHD T521 ME 1 10 220
240
0,12
0,11
1,00
1,00
26,4
26,4
2 100
2 100
80
80
3,79
3,79
0,80
0,80
2 M EHD T521 ME 2 10 220
240
0,22
0,20
1,00
1,00
48,4
48,0
4 200
4 200
87
88
2,07
2,08
0,87
0,88
28 W
(1 148 mm)
1 M EHD T528 ME 1 10 220
240
0,15
0,13
1,00
1,00
33,0
31,2
2 900
2 900
88
93
3,03
3,21
0,85
0,90
2 M EHD T528 ME 2 10 220
240
0,29
0,26
1,00
1,00
63,8
62,4
5 800
5 800
91
93
1,57
1,60
0,88
0,90
Models for Europe and Singapore (CE
†
, ENEC
†
Certification, Registered
under the Consumer Protection Registration Scheme in Singapore)
EcoSystem
® H-Series ballasts for T5HO Linear Lamps
For proper dimming, all lamps must comply to accepted standards, 24 W (60081-IEC-6620), 39 W (60081-IEC-6730) and 54 W (60081-IEC-6840)
Not for use with Reduced Wattage Lamps
Lamp
Type
Lamp
Watts
(length)
Lamps
per
Ballast
Case
Size
EcoSystem®
H-Series
Input
Voltage
(V~)
Input
Current
(A)
Ballast
Factor
(BF)
Input
Power
(W)
System
Lumens*
(lm)
System
Efficacy*
(lm/W)
Ballast
Efficacy
Factor
(BEF)
Relative
System
Efficacy
(RSE)
T5HO
Linear
24 W
(549 mm)
1 M EHD T524 ME 1 10 220
240
0,13
0,12
1,00
1,00
28,6
28,8
2 000
2 000
70
69
3,50
3,47
0,84
0,83
2 M EHD T524 ME 2 10 220
240
0,25
0,23
1,00
1,00
55,0
55,2
4 000
4 000
73
73
1,82
1,81
0,87
0,87
39 W
(848 mm)
1 M EHD T539 ME 1 10 220
240
0,20
0,18
1,00
1,00
44,0
43,2
3 500
3 500
80
81
2,27
2,31
0,89
0,90
2 M EHD T539 ME 2 10 220
240
0,37
0,34
1,00
1,00
81,4
81,6
7 000
7 000
86
86
1,23
1,23
0,96
0,96
54 W
(1 148 mm)
1 M EHD T554 ME 1 10 220
240
0,29
0,26
1,00
1,00
63,8
62,4
5 000
5 000
78
80
1,57
1,60
0,85
0,87
2 M EHD T554 ME 2 10 220
240
0,51
0,48
1,00
1,00
112,2
115,2
10 000
10 000
89
87
0,89
0,87
0,96
0,94
†
Certification is applicable to any country recognizing the certification body.
* Actual number may vary with lamp model. Please consult lamp manufacturer for lamp-specific data.
3
Fluorescent Dimming Ballasts International EcoSystem® H-Series Architectural Dimming
369382d 4 03.21.13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem® H-Series ballasts for T5 Linear Lamps
For proper dimming, all lamps must comply to accepted standards, 14 W (60081-IEC-6520), 21 W (60081-IEC-6530) and 28 W (60081-IEC-6640)
Not for use with Reduced Wattage Lamps
Lamp
Type
Lamp
Watts
(length)
Lamps
per
Ballast
Case
Size
EcoSystem®
H-Series
Input
Voltage
(V~)
Input
Current
(A)
Ballast
Factor
(BF)
Input
Power
(W)
System
Lumens*
(lm)
System
Efficacy*
(lm/W)
Ballast
Efficacy
Factor
(BEF)
Relative
System
Efficacy
(RSE)
T5 Linear 14 W
(549 mm)
1 M EHD T514 ME 1 10-R 220
240
0,09
0,08
1,00
1,00
19,8
19,2
1 350
1 350
68
70
5,05
5,21
0,71
0,73
2 M EHD T514 ME 2 10-R 220
240
0,16
0,15
1,00
1,00
35,2
36,0
2 700
2 700
77
75
2,84
2,78
0,80
0,78
28 W
(1 148 mm)
1 M EHD T528 ME 1 10-R 220
240
0,15
0,13
1,00
1,00
33,0
31,2
2 900
2 900
88
93
3,03
3,21
0,85
0,90
2 M EHD T528 ME 2 10-R 220
240
0,29
0,26
1,00
1,00
63,8
62,4
5 800
5 800
91
93
1,57
1,60
0,88
0,90
Models for Argentina (S-Mark
†
Certification)
EcoSystem
® H-Series ballasts for T5HO Linear Lamps
For proper dimming, all lamps must comply to accepted standards, 24 W (60081-IEC-6620), 39 W (60081-IEC-6730) and 54 W (60081-IEC-6840)
Not for use with Reduced Wattage Lamps
Lamp
Type
Lamp
Watts
(length)
Lamps
per
Ballast
Case
Size
EcoSystem®
H-Series
Input
Voltage
(V~)
Input
Current
(A)
Ballast
Factor
(BF)
Input
Power
(W)
System
Lumens*
(lm)
System
Efficacy*
(lm/W)
Ballast
Efficacy
Factor
(BEF)
Relative
System
Efficacy
(RSE)
T5HO
Linear
54 W
(1 148 mm)
1 M EHD T554 ME 1 10-R 220
240
0,29
0,26
1,00
1,00
63,8
62,4
5 000
5 000
78
80
1,57
1,60
0,85
0,87
2 M EHD T554 ME 2 10-R 220
240
0,51
0,48
1,00
1,00
112,2
115,2
10 000
10 000
89
87
0,89
0,87
0,96
0,94
†
Certification is applicable to any country recognizing the certification body.
* Actual number may vary with lamp model. Please consult lamp manufacturer for lamp-specific data.
4
Fluorescent Dimming Ballasts International EcoSystem® H-Series Architectural Dimming
369382d 5 03.21.13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem® H-Series ballasts for T5HO Linear Lamps
For proper dimming, all lamps must comply to accepted standards, 24 W (60081-IEC-6620), 39 W (60081-IEC-6730) and 54 W (60081-IEC-6840)
Not for use with Reduced Wattage Lamps
Lamp
Type
Lamp
Watts
(length)
Lamps
per
Ballast
Case
Size
EcoSystem
®
H-Series
Input
Voltage
(V~)
Input
Current
(A)
Ballast
Factor
(BF)
Input
Power
(W)
System
Lumens*
(lm)
System
Efficacy*
(lm/W)
Ballast
Efficacy
Factor
(BEF)
Relative
System
Efficacy
(RSE)
T5HO
Linear
24 W
(549 mm)
1 M EHD T524 ME 1 10-B 127
220
0,23
0,13
1,00
1,00
29,2
28,6
2 000
2 000
68
70
3,42
3,50
0,82
0,84
2 M EHD T524 ME 2 10-B 127
220
0,44
0,25
1,00
1,00
53,9
55,0
4 000
4 000
72
73
1,79
1,82
0,86
0,87
39 W
(848 mm)
1 M EHD T539 ME 1 10-B 127
220
0,35
0,20
1,00
1,00
44,5
44,0
3 500
3 500
79
80
2,25
2,27
0,88
0,89
2 M EHD T539 ME 2 10-B 127
220
0,66
0,37
1,00
1,00
83,8
81,4
7 000
7 000
84
86
1,19
1,23
0,93
0,96
54 W
(1 148 mm)
1 M EHD T554 ME 1 10-B 127
220
0,50
0,29
1,00
1,00
64,0
62,7
5 000
5 000
78
80
1,56
1,59
0,84
0,86
2 M EHD T554 ME 2 10-B 127
220
0,93
0,55
1,00
1,00
118,4
120,8
10 000
10 000
84
83
0,84
0,83
0,91
0,89
EcoSystem® H-Series ballasts for T5 Linear Lamps
For proper dimming, all lamps must comply to accepted standards, 14 W (60081-IEC-6520), 21 W (60081-IEC-6530) and 28 W (60081-IEC-6640)
Not for use with Reduced Wattage Lamps
Lamp
Type
Lamp
Watts
(length)
Lamps
per
Ballast
Case
Size
EcoSystem
®
H-Series
Input
Voltage
(V~)
Input
Current
(A)
Ballast
Factor
(BF)
Input
Power
(W)
System
Lumens*
(lm)
System
Efficacy*
(lm/W)
Ballast
Efficacy
Factor
(BEF)
Relative
System
Efficacy
(RSE)
T5 Linear 14 W
(549 mm)
1 M EHD T514 ME 1 10-B 127
220
0,15
0,09
1,00
1,00
19,6
19,8
1 350
1 350
69
68
5,12
5,05
0,72
0,71
2 M EHD T514 ME 2 10-B 127
220
0,28
0,16
1,00
1,00
35,0
35,4
2 700
2 700
77
76
2,86
2,82
0,80
0,79
21 W
(848 mm)
1 M EHD T521 ME 1 10-B 127
220
0,20
0,12
1,00
1,00
25,4
26,4
2 100
2 100
82
80
3,94
3,79
0,83
0,80
2 M EHD T521 ME 2 10-B 127
220
0,39
0,22
1,00
1,00
49,5
48,4
4 200
4 200
85
87
2,02
2,07
0,85
0,87
28 W
(1 148 mm)
1 M EHD T528 ME 1 10-B 127
220
0,26
0,15
1,00
1,00
33,5
33,7
2 900
2 900
86
86
2,98
2,97
0,84
0,83
2 M EHD T528 ME 2 10-B 127
220
0,50
0,29
1,00
1,00
63,6
63,4
5 800
5 800
91
92
1,57
1,58
0,88
0,88
Models for Brazil (InMetro
†
Certification)
†
Certification is applicable to any country recognizing the certification body.
* Actual number may vary with lamp model. Please consult lamp manufacturer for lamp-specific data.
Continued on next page...
5
Fluorescent Dimming Ballasts International EcoSystem® H-Series Architectural Dimming
369382d 6 03.21.13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem® H-Series ballasts for T8 Linear Lamps
For proper dimming, all lamps must comply to accepted standards, 32 W (NEMA LL9-2009)
Not for use with Reduced Wattage Lamps
Lamp
Type
Lamp
Watts
(length)
Lamps
per
Ballast
Case
Size
EcoSystem
®
H-Series
Input
Voltage
(V~)
Input
Current
(A)
Ballast
Factor
(BF)
Input
Power
(W)
System
Lumens*
(lm)
System
Efficacy*
(lm/W)
Ballast
Efficacy
Factor
(BEF)
Relative
System
Efficacy
(RSE)
T8 Linear 32 W
(1 220 mm)
1 M EHD T832 ME 1 10-B 127
220
0,28
0,16
1,00
1,00
35,7
35,2
3 000
3 000
84
85
2,80
2,84
0,90
0,91
2 M EHD T832 ME 2 10-B 127
220
0,53
0,31
1,00
1,00
67, 2
67, 8
6 000
6 000
89
89
1,49
1,48
0,95
0,94
Models for Brazil (InMetro
†
Certification) (continued)
†
Certification is applicable to any country recognizing the certification body.
* Actual number may vary with lamp model. Please consult lamp manufacturer for lamp-specific data.
6
Fluorescent Dimming Ballasts International EcoSystem® H-Series Architectural Dimming
369382d 7 03.21.13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Models for China (CCC
†
Certification)
EcoSystem
® H-Series ballasts for T5HO Linear Lamps
For proper dimming, all lamps must comply to accepted standards, 54 W (60081-IEC-6840)
Not for use with Reduced Wattage Lamps
Lamp
Type
Lamp
Watts
(length)
Lamps
per
Ballast
Case
Size
EcoSystem®
H-Series
Input
Voltage
(V~)
Input
Current
(A)
Ballast
Factor
(BF)
Input
Power
(W)
System
Lumens*
(lm)
System
Efficacy*
(lm/W)
Ballast
Efficacy
Factor
(BEF)
Relative
System
Efficacy
(RSE)
T5HO
Linear
54 W
(1 148mm)
1 M EHD T554 ME 1 10-C 220
240
0,29
0,26
1,00
1,00
63,8
62,4
5 000
5 000
78
80
1,57
1,60
0,85
0,87
2 M EHD T554 ME 2 10-C 220
240
0,51
0,48
1,00
1,00
112,2
115,2
10 000
10 000
89
87
0,89
0,87
0,96
0,94
†
Certification is applicable to any country recognizing the certification body.
* Actual number may vary with lamp model. Please consult lamp manufacturer for lamp-specific data.
EcoSystem® H-Series ballasts for T5 Linear Lamps
For proper dimming, all lamps must comply to accepted standards, 14 W (60081-IEC-6520), 21 W (60081-IEC-6530) and 28 W (60081-IEC-6640)
Not for use with Reduced Wattage Lamps
Lamp
Type
Lamp
Watts
(length)
Lamps
per
Ballast
Case
Size
EcoSystem
®
H-Series
Input
Voltage
(V~)
Input
Current
(A)
Ballast
Factor
(BF)
Input
Power
(W)
System
Lumens*
(lm)
System
Efficacy*
(lm/W)
Ballast
Efficacy
Factor
(BEF)
Relative
System
Efficacy
(RSE)
T5 Linear 14 W
(549 mm)
1 M EHD T514 ME 1 10-C 220
240
0,09
0,08
1,00
1,00
19,8
19,2
1 350
1 350
68
70
5,05
5,21
0,71
0,73
2 M EHD T514 ME 2 10-C 220
240
0,16
0,15
1,00
1,00
35,2
36,0
2 700
2 700
77
75
2,84
2,78
0,80
0,78
28 W
(1 148 mm)
1 M EHD T528 ME 1 10-C 220
240
0,15
0,13
1,00
1,00
33,0
31,2
2 900
2 900
88
93
3,03
3,21
0,85
0,90
2 M EHD T528 ME 2 10-C 220
240
0,29
0,26
1,00
1,00
63,8
62,4
5 800
5 800
91
93
1,57
1,60
0,88
0,90
7
Fluorescent Dimming Ballasts International EcoSystem® H-Series Architectural Dimming
369382d 8 03.21.13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Case Dimensions
M
A 359 mm
B 347 mm
(mounting centers)
C 30 mm
D 25 mm
D
B
A
C
8
Fluorescent Dimming Ballasts International EcoSystem® H-Series Architectural Dimming
369382d 9 03.21.13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem® H-Series Wiring Diagrams
EcoSystem® Digital Link Overview
• The EcoSystem
® Digital Link wiring (E1 and E2)
connects the digital ballasts together to form a lighting
control system.
• Each EcoSystem
® Digital Link supports up to 64digital
ballasts, 64occupancy sensors, 16daylight sensors,
and 64 wallstations or IR receivers. Refer to each
control specification for specifics on maximum number
of controls per link.
• E1 and E2 (EcoSystem
® digital link wires) are polarity
insensitive and can be wired in any topology.
• An EcoSystem
® Energi Savr NodeTM module,
GRAFIKEye
®QS with EcoSystem® control unit, or
Quantum
® system provides power for the EcoSystem®
Digital Link and supports system programming.
• All EcoSystem
® Digital Link programming is completed by
using the Energi Savr App for Apple iPad, iPod Touch
or iPhone mobile digital devices, GRAFIK Eye
®QS with
EcoSystem
®, or Quantum® systems.
EcoSystem
® Digital Link Wiring
• Ballast EcoSystem
® Digital Link terminals accept one
0,75mm
2
to 1,5mm
2
(18 AWG to 16 AWG) solid copper
wire per terminal.
• Make sure that the supply breaker to the Digital Ballast
and EcoSystem
® Digital Link Supply is OFF when
wiring.
• Connect the two conductors to the two Digital Ballast
terminals E1 and E2 as shown.
• Using two different colors for E1 and E2 will reduce
confusion when wiring several ballasts together.
E1
E2
N
L
Digital
Link
E1
E2
N
L
Digital
Link
MAINS
MAINS
Ballast Terminals
Ballast Terminals
To the EcoSystem
® Digital Link Supply and up to
64total ballasts
Notes
• The EcoSystem
® Digital Link Supply does not have
to be located at the end of the Digital Link.
• EcoSystem
® Digital Link length is limited by the wire
gauge used for E1 and E2 as follows:
Wire Size Digital Link Length
(max)
4,0 mm
2
825 m
2,5 mm
2
515 m
1,5 mm
2
310 m
1,0 mm
2
205 m
0,75 mm
2
155 m
12 AWG 2 200 ft
14 AWG 1 400 ft
16 AWG 900 ft
18 AWG 550 ft
Apple, iPad, iPod Touch, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
9
Fluorescent Dimming Ballasts International EcoSystem® H-Series Architectural Dimming
369382d 10 03.21.13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wiring to One Lamp (M case shown)
NOTICE
• Maximum ballast to lamp socket lead length is 2 m.
• Wire colors shown correspond to the terminal color on the ballast, but may vary depending upon fixture
construction.
BLU
BLU
RED
RED
BLU
BLU
RED
RED
YEL
YEL
Blue
Red
Wiring to Two Lamps (M case shown)
Blue
Yellow
Red
EcoSystem® H-Series Ballast Wiring Diagrams — T5, T5HO and T8 linear lamps
10
Fluorescent Dimming Ballasts International EcoSystem® H-Series Architectural Dimming
369382d 11 03.21.13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem® Power Wiring Diagram
E1
E2
N
L
Digital
Link
MAINS
1
Ballast is earthed via the case.
2
Color code shown for the identification of line and neutral conductors are in compliance with IEC/EN/BSEN 60446, and
BS7671, color may vary based on local codes and standards.
3
Must not be wired to a switching device or system functionality will be lost.
Neutral
2, 3
Live
2, 3
E1
2
E2
2
Earth
1
EcoSystemR
H-Series
Ballast
11
Fluorescent Dimming Ballasts International EcoSystem® H-Series Architectural Dimming
369382d 12 03.21.13
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
ATTENTION ELECTRICIANS
AND CONTRACTORS
Ballast/Socket Leads
Lead lengths from ballast to socket must not exceed
2m for T5, T5HO and T8 linear lamps.
Lamp Sockets
Lutron requires that sockets MUST comply with
IEC60400. Prior to installation sockets must be
inspected for marks to ensure compliance with
IEC60400. Two examples of these marks are
E and
Q
. Use only rapid start sockets. DO NOT use instant
start sockets (see LutronR Application Note#122
[P/N 048122] for more information).
Lamp Mounting
For proper lamp performance, lamps must be mounted
at the correct height from the earthed metal surface.
Having a fluorescent lamp too close to the earthed
metal will make the minimum intensity too low and
reduce lamp life. Having a fluorescent lamp too far
away from the earthed metal will make the lamp flicker
or not turn on at all. Refer to the table below for lamp
mounting height requirements.
Lamp Mounting Height Requirements
Lamp Type Lamp Mounting Height
T8 Linear 3,2 to 19,1 mm
T5 Linear 1,6 to 9,5 mm
IMPORTANT: Lamps must never touch ground plane
and should be placed without obstruction.
Ballast Operating Temperature
Ballast t
C
must not exceed 70°C.
Cold Air Flow
Ensure that no cold air (from HVAC system, etc) is
blowing across the lamps. Cooling the lamp may cause
performance issues.
Wiring and Grounding
Ballast and lighting fixture must be effectively grounded.
Ballasts must be installed per national and local
electrical codes.
ATTENTION
FACILITIES MANAGERS
PERFORMANCE
Lamp Seasoning
Prior to dimming lamps, refer to the lamp manufacturer’s
lamp seasoning requirements.
SERVICE
Replacement Ballasts
Use Lutron
® replacement ballasts with exact model
numbers. Consult Lutron if you have any questions.
Technical Assistance
For questions concerning the installation or operation of
this product, call the Lutron Technical Support Center.
Please provide exact model number when calling.
Brazil + 55.11.3257.674 5
Monday–Friday 8:30 to 17:30 BRT
Central/South America: +1.610.282.6701
China 10.800.712.1536 (Beijing)
10.800.120.1536 (Shanghai)
800.901.849 (Hong Kong)
Europe +44.(0)20.7680.4481
Monday–Friday 9:00 to 19:00 GMT
Singapore: 800.120.4491
Other countries: +1.610.282.3800
24 hours per day, 7 days per week
For further information, please visit:
www.lutron.com/ballasts
Lamp
Lamp Socket
(side view)
Grounded Metal
Mounting Height
Ballast
12
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369-382 ENG 369382 Int'l EcoSystem H Series

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 20 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document