Fillable 369-549b English PowPak™ Relay Module

Fill Online, Printable, Fillable, Blank 369-549b English PowPak™ Relay Module Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369-549b English PowPak™ Relay Module

On average this form takes 11 minutes to complete

The 369-549b English PowPak™ Relay Module form is 6 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 42 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
PowPak
™
Relay Module Energi TriPak
™
Series Wireless Lighting Control
369-549b 1 01.23.12
PowPak
™
Relay Module
The PowPak
™
Relay Module is a radio frequency (RF) device
capable of controlling up to 5A of general-purpose load based
on input from Pico
® controls and Radio Powr Savr
™
occupancy
and daylight sensors. An optional, low-voltage dry contact
closure output is available to communicate occupancy status to
3rd-party systems such as HVAC controllers.
Communication with RF input devices, such as Pico
® controls
and Radio Powr Savr
™
sensors, is accomplished using Lutron
Clear Connect
™
RF Technology.
Features
•Capableofswitching5Aofgeneral-purposeloads
•Optionallow-voltagedrycontactclosureoutputprovides
integration to building management systems, HVAC, VAV, etc.
•Variousoperatingvoltagesavailable—refertomodelnumber
chart below for details on voltage requirements
•ReceiveswirelessinputsfromuptoninePico® controls, six
Radio Powr Savr
™
occupancy/vacancy sensors, and one Radio
Powr Savr
™
daylight sensor
•UtilizesLutronClearConnect
™
RFTechnology—refertomodel
number chart below for frequency band data
•Mountstoajunctionboxthroughastandardhalf-inch
(NPTtradesize)knockout
•Complieswithrequirementsforuseinacompartment
handling environmental air (plenum) per NEC
® 2011 300.22(C)(3)


Description Model Number Operating
Voltage
Frequency Band Region
PowPak
™
Relay Module RMJ-5R-DV-B 120/277 V~ 431.0–437.0MHz U.S.A.,Canada,
Mexico
RMQ-5R-DV-B 220 -240 V ~
433.05–434.79MHz Hong Kong
RMM-5R-DV-B 220 -240 V ~
868.125–868.475MHz
China and
Singapore
PowPak
™
Relay Module
withOccupancy-Status
CCO
RMJ-5RCCO1-DV-B 120/277 V~
431.0–437.0MHz U.S.A.,Canada,
Mexico
RMQ-5RCCO1-DV-B 220 -240 V ~
433.05–434.79MHz Hong Kong
RMM-5RCCO1-DV-B 220 -240 V ~
868.125–868.475MHz
China and
Singapore
NOTE: Contact Lutron for frequency band compatibility for your geographic region if it is not indicated above.
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
PowPak
™
Relay Module Energi TriPak
™
Series Wireless Lighting Control
369-549b 2 01.23.12
Specifications
Regulatory Approvals
RMJ- models only
•ULListed
•UL2043PlenumRated
•FCCapproved.ComplieswiththelimitsforaClassB
device, pursuant to Part 15 of the FCC rules.
•CSAandIC
•COFETEL
•NOM
Power
•Operatingvoltage:
RMJ- models 120 / 277 V ~
50 / 60Hz
RMQ- models 220-240 V ~
50 / 60Hz
RMM- models 220-240 V ~
50 / 60Hz
System Communication
•OperatesusingClearConnect
™
RF Technology
for reliable wireless communication; refer to model
number chart on page 1 for frequency band details
•RFrangeis30ft(10m)
Environment
•Ambientoperatingtemperature:32°Fto131°F
(0°Cto55°C)
•0%to90%humidity,non-condensing
•Forindooruseonly
Load
•Maximumload:5Ageneralpurpose.Nominimum
load requirements.
•Loadtypesinclude(butarenotlimitedto):
–Incandescent
– MLV
– ELV
– Resistive
–Inductive
– Magnetic fluorescent
– Electronic fluorescent
•Motorrating:
RMJ- models 1/6 HP (120V~), 1/3 HP (277V~)
RMQ- models 1/2 HP (220-240V~)
RMM- models 1/2 HP (220-240V~)
•Loadrelayisnon-latching
Key Design Features
•LEDstatusindicatorshowscurrentloadstatusand
provides programming feedback
•Powerfailurememory:Ifpowerisinterrupted,
connected loads will return to the previous level prior
to interruption
•DaylightingcanbeoverriddenbypressingtheON
button on any associated Pico®
– Daylighting will be re-enabled after 2 hours or after
the area becomes unoccupied
Contact Closure Output (CCO version only)
•Providesoccupancystatusto3rd-partyequipment
such as building management systems, HVAC, and
VAV controllers
•Providesbothnormallyopen(NO)andnormally
closed (NC) dry contacts
•Maintainedoutputtype
•CCOterminalsaccept20to16AWG(0.5 to 1.5 mm
2
)
solid or stranded wire
•Outputislatching
•Notforvoltagesgreaterthan24V
•TheCCOisnotratedtocontrolunclamped,
inductiveloads.Inductiveloadsinclude,butarenot
limited to, relays, solenoids, and motors. To control
these types of equipment, a flyback diode must be
used (DC voltages only). See diagram below. For
more information, please see Application Note #434
(p/n 048434).
Switching
Voltage
0-24 V-
0-24 V~
24 V-
max.
Inductive
Load
CCO
Output
NO
NC
COM
Flyback
Diode
(required for
inductive
loads)
Resistive
Load
1.0 A
0.5 A
R
+
-
Switching
Voltage
0-24 V-
0-24 V~
24 V-
max.
Inductive
Load
CCO
Output
NO
NC
COM
Flyback
Diode
(required for
inductive
loads)
Resistive
Load
1.0 A
0.5 A
R
+
-
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
PowPak
™
Relay Module Energi TriPak
™
Series Wireless Lighting Control
369-549b 3 01.23.12
Test
System Diagram
Radio Powr Savr
™
OccupancySensor(upto6)
Radio Powr Savr
™
Daylight Sensor (up to 1)
Pico® Control (up to 9)
To 3rd-Party
Equipment
To power source
and load
Wiring Diagram
HOT
NEUTRAL
SWITCHED HOT
LOAD
COM
NO
NC
To 3rd-Party
Equipment
Occupancy-Status CCO
(RM__-5RCCO1-DV-B only)
Junction Box
Black
Red
White
3
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
PowPak
™
Relay Module Energi TriPak
™
Series Wireless Lighting Control
369-549b 4 01.23.12
Wiring Diagram
Input Voltage
Conduit Nut
White
(Neutral)
Black
(Hot)
Red
(Switched Hot)
NOTE:WhenwiringCCOto3rd-party
systems,use20to16AWG(0.5to1.5mm
2
)
solid or stranded wire.
To 3rd Party Equipment
To Load
NO
(NormallyOpen)
NC
(Normally Closed)
COM
(Common)
PowPak
™
InstallationInsideJunctionBox
(Dimming Module RMJ-ECO32-DV-B shown)
Antenna
BOXABOXB
Insomeapplications,aPowPak
™
modulecanbeinstalledinsidea4inx4in(102mmx102mm)junctionbox.For
information about how to perform this installation, please see ApplicationNote #423 (p/n 048423).
CCOoperationaffectedonlybyassociatedoccupancyorvacancysensors.
Room Occupied: NO=CloseNC=Open
Room Unoccupied: NO=OpenNC=Close
4
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
PowPak
™
Relay Module Energi TriPak
™
Series Wireless Lighting Control
369-549b 5 01.23.12
Dimensions
Dimensionsareshownas:in(mm)
Range Diagram
•ContactLutronrstforapplicationsusingfoil-backedormetallicceilingtiles.
1.25
(31.8)
2.82
(71.6)
3.42
(86.9)
3.94
(100.1)
All Wireless Transmitters must be installed within
30 ft (10 m) of the PowPakTM Relay Module.
30 ft (10 m)
Maximum
40 ft (12 m)
30 ft (10 m)
PowPak
™
Relay Module
Installincenterofroomto
maximizeRFcoverage.
Pico®
Wireless
Transmitter
Half-inch
NPTTradeSize
Radio Powr Savr
™
Occupancy Sensor
5
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
PowPak
™
Relay Module Energi TriPak
™
Series Wireless Lighting Control
369-549b 6 01.23.12
Default Operation
Transmitting Device Transmitted Command Load
Relay Default Action
CCO Default Action
Pico
® On Close No Action
Off Open No Action
Raise No Action No Action
Lower No Action No Action
Preset Close No Action
Radio Powr Savr
™
OccupancySensor
Occupied Close NO=Close,NC=Open
Unoccupied Open NO=Open,NC=Close
Radio Powr Savr
™
Vacancy Sensor
Occupied No Action NO=Close,NC=Open
Unoccupied Open NO=Open,NC=Close
Radio Powr Savr
™
Daylight Sensor
Ambient Light Below
Target Level
Close No Action
Ambient Light Above
Target Level
Open No Action
6
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369-549b English PowPak Relay Module

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 6 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document