R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
omxdw-2 03.23.04
Wallstations
Architrave Door Jamb Style
GRAFIK Systems
OMX-7B-DW-__
7-Button ARCHITRAVETM
Door Jamb Wallstation
Color and Finish Codes
Description
• Fits into door jamb - occupants can adjust
lighting as they enter a room.
• Scene selection buttons activate up to five
scenes.
• Status LEDs indicate which scene is selected.
• Off button turns all lights off.
• Raise and lower buttons brighten or dim all
lighting in the selected scene.
• May be custom-configured for other functions.
• Works with GRAFIK 5000/6000/7000 Systems.
• Mounts in Lutron-supplied wallbox P/N 241-399
Finish and Engraving Options
• Available with engraving to meet specific project
needs.
• Green LEDs are standard. Amber LEDs are
optional.
LEDs
Off or additional scene
Raise
Scene selection buttons
Lower
1
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
omxdw-4 03.23.04
Wallstations
Architrave Door Jamb Style
GRAFIK Systems
1 3/4"
(44mm)
1 1/2"
(38mm)
1/8"
(3mm)
4 1/2"
(144mm)
1 2 3 4
1 2 3 4 5 6
Dimensions
Power
Low-voltage type Class 2 (PELV).
Operating voltage: 32 V Direct Current.
Key Design Features
• Meets IEC 801-2. Tested to withstand 15kV
electro-static discharge without damage or
memory loss.
• Faceplate snaps on with no visible means of
attachment.
System Communications and Capacity
• Low-voltage type Class 2 (PELV) wiring
connects Wallstations to Control Units
and other components.
• Up to 32 Wallstations, Control Units, and/or
Control Interfaces may be connected per
Class 2 (PELV) wiring link.
Terminals
Accept up to two #18 AWG (1.0mm
2
)
typical.
Environment
32-104°F (0-40°C). Relative humidity less
than 90% non-condensing.
Side View
Back View
Color and Finish Codes
Standard Finishes
Ship in 48 hours
White WH
Bright Brass BB
Matte Finishes
Ship in 48 hours
Ivory IV
Beige BE
Gray GR
Brown BR
Black BL
Metal Finishes
Ship in 4 to 6 weeks
Bright Chrome BC
Satin Brass SB
Satin Chrome SC
Satin Nickel SN
Antique Brass QB
Antique Bronze QZ
Anodized Aluminum Finishes
Ship in 4 to 6 weeks
Clear CLA
Black BLA
Brass BRA
Bronze BZA
Also available:
-Custom Controls
-Color Matching
-Engraving
Ship in 4 to 6 weeks. Pricing
may vary depending on finish.
Faceplate
Lutron-supplied Wallbox
P/N 241-399
Class 2 (PELV) Wiring
DIP Switches
1-4 used to set address
5 and 6 select function
Terminals for
Class 2 (PELV) Wiring
Mounting
Specifications - 2B and 7B
Front View
2
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
omxdw-6 03.23.04
Wallstations
Architrave Door Jamb Style
GRAFIK Systems
Low-voltage Class 2 (PELV) Wiring
• Use low-voltage Class 2 (PELV) wiring to daisy-chain Wallstations
to the Processor Panel.
• Make connections inside the wallbox or in a switch/junction box
with a maximum wire length of 8 feet (2.5m) from the link to the
Wallstation.
• Two #12 AWG (2.5mm
2
) conductors for common (terminal 1)
and 32VDC (terminal 2). These will not fit in terminals. Connect
as shown.
• One shielded, twisted pair #18 AWG (1.0mm
2
) for data link
(terminals 3 and 4).
• Connect Drain/Shield as shown. Do not connect to Ground
(Earth) or Wallstation. Connect the bare drain wires and cut off
the outside shield.
Note: Some Wallstations have a “D” terminal for Drain. The
Drain/Shield wire may be connected to this terminal.
Wallstation Rear View
Wallstation Installation
Note: Use appropriate wire connecting devices
as specified by local codes.
123456
4
3
2
1
Data Link
(1) Shielded, twisted
pair #18 AWG (1.0mm
2
)
3: MUX
4: MUX
D: Drain/Shield
(2) #12 AWG
(2.5mm
2
)
(1) #18 AWG
(1.0mm
2
)
(2) #12 AWG
(2.5mm
2
)
Class 2/PELV
Control Wiring
1: Common
2: 32VDC
3