Preset Dimming Controls
OMX-4600
4600-2 01.05.06
Model Numbers:
Page
SPECIFICATION SUBMITTAL
GRAFIK Systems
Job Name:
Job Number:
Key Design Features
• Meets IEC 801-2. Tested to withstand 15kV
electrostatic discharge without damage or
memory loss.
• Power failure memory automatically restores
lighting to the scene selected prior to power
interruption.
• Faceplate snaps on with no visible means of
attachment.
System Communications and Capacities
• Low-voltage type Class 2 (PELV) wiring connects
Control Units to other system components.
• The OMX-4600 Control Unit counts as one of 32
maximum Wallstations and/or Control Interfaces
allowed on a Class 2 (PELV) Control Station
Device Link.
Environment
• 32-104°F (0-40°C). Relative humidity less than
90% non-condensing.
Power
• Low-voltage type Class 2 (PELV)
Operating voltage: 32 V Direct Current.
Lighting Sources/Load Types
Controls lighting sources with a smooth, continuous
Square Law dimming curve or on a full conduction
non-dim basis via GP and LP Dimming Panels and
XP Softswitch
TM Panels.
Preset Control
• 4 preset lighting scenes and off are accessible from
the Control Unit front panel.
• Additional scenes are stored in Processor Panel.
These scenes are accessible via Wallstations,
Control Interfaces, and/or PC.
• Light levels fade smoothly between scenes. Fade
time can be set differently for each scene, between
0-59 sec. or 1-60 min. Fade time from Off is
capped at 5 sec. Fade time can be set differently
for each zone through the Processor.
Specifications
