Model Numbers:
Page
SPECIFICATION SUBMITTAL
Job Name:
Job Number:
Key Design Features
• Meets IEC 801-2. Tested to withstand 15kV
electrostatic discharge without damage or
memory loss.
• Power failure memory automatically restores
lighting to the scene selected prior to power
interruption.
• Faceplate snaps on with no visible means of
attachment.
System Communications and Capacities
• Low-voltage type Class 2 (PELV) wiring connects
Control Units, Wallstations, and Control Interfaces.
• Up to 8 Control Units may be linked to control up
to 64 zones.
• Up to 16 total Wallstations and Control Interfaces
may be added for a total of 24 control points.
Environment
• 32-104°F (0-40°C). Relative humidity less than
90% non-condensing.
Power
• Low-voltage type Class 2 (PELV)
Operating voltage: 24 V Direct Current.
Lighting Sources/Load Types
Controls lighting sources with a smooth, continuous
Square Law dimming curve or on a full conduction
non-dim basis via GP and LP Dimming Panels and
XP Softswitch
TM Panels.
Preset Control
• 4 preset lighting scenes and off are accessible from
the Control Unit front panel.
• 12 additional scenes are stored in the Control Unit.
These scenes are accessible via Wallstations and/or
Control Interfaces.
• Light levels fade smoothly between scenes. Fade
time can be set differently for each scene, between
0-59 sec. or 1-60 min. Fade time from Off is
capped at 5 sec.
Specifications
