Fillable GRX PWM GRX PWM GRX PWM.qxp (Lutron Electronics, Inc.)

Fill Online, Printable, Fillable, Blank GRX PWM GRX PWM GRX PWM.qxp (Lutron Electronics, Inc.) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

GRX PWM GRX PWM GRX PWM.qxp (Lutron Electronics, Inc.)

On average this form takes 9 minutes to complete

The GRX PWM GRX PWM GRX PWM.qxp (Lutron Electronics, Inc.) form is 5 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 35 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
pwm-1 05.30.06
Power Interfaces
GRX-PWM
Switching Systems
GRX-PWM Pulse Width Modulation Interface
Description
• Provides capability for a GRAFIK Eye 3000 Series control
unit, GP, or LP Panel to switch and dim fluorescent lights
that have pulse width modulating (PWM) dimming ballasts.
• Switches and dims any PWM fluorescent dimming ballast
powered by 100-277 V that conforms to JISC8120-2.
• Switches up to 16 A of fluorescent, incandescent, low-
voltage, metal halide neon/cold cathode load.
• Switches motors up to 1/4 HP @ 100/120 V , 1/2 HP @
200-277 V
• Up to five PWM interfaces may be connected to one
GRAFIK Eye 3000 control unit zone. This allows one zone to
control up to five 16 A circuits of electronic dimming ballasts
or five motors.
• Switches 100-277 V 50/60 Hz power to loads.
• Requires 100/120 V 50/60 Hz power for internal
operations.
COOPERSBURG, PA 18036 U.S.A .
G 8 BR
144-317 GRX-TVI 1-9
12 V PWM INTERFACE CONTROL
Control Input:
100-240 V 50/60Hz
Switched Output: 100-240
GRX-PWM
Incandescent 16A
Fluorescent 16A
Low-voltage 16A
Metal Halide 16A
Neon/Cold Cathode 16A
Motor 1 /4 HP@120V
1/2 HP@277V
®
Control
GRX-PWM Input Rating
I
H
2
0.02A
I
DH
2
0.1A
Load T ype Switched
Ratings
0-12V Output Rating
Max. 0.4A Class 2
Coopersburg, PA 18036 U.S.A.
GRX-PWM
Incandescent
Fluorescent
Low Voltage
Metal Halide
Neon/Cold Cathode
Motor
16 A
16 A
16 A
16 A
16 A
1/4 HP @ 120 V
1/2 HP @ 277 V
Load Type Switched
GRX-PWM Output Rating
0.02 A
0.1 A
0-12 V Output Rating
Max. 0.4 A Class 2
I
H
2
I
DH
2
Control
079-1275
CB
P10
Type 1 Enclosure
Ind. Cont. Eq.
Listed 243C
50/60 Hz
0-12 V PWM INTERFACE CONTROL
Switched Output:
Control Input:
100-127 V
100-277 V
50/60 Hz
Control
GRX-PWM Input Rating
1
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
pwm-2 05.30.06
Power Interfaces
GRX-PWM
Switching Systems
Standards
• UL listed
Power
• Load (output) power (phase independent of lighting):
100-277 V
• Input voltage rating (phase independent of lighting
control): 100/120 V , 50/60 Hz
• Switched voltage rating: 100-277 V , 50/60 Hz
•H
2 terminal input rating: 200 mA
•DH
2
terminal input rating: 100 mA
• 12 V PWM output rating: 400 mA - sources
current only
Zone Capacity
• Up to five PWM interfaces per control unit zone.
Key Design Features
• Complies with Standard UL 508.
• Provides a PELV (Class 2: USA) isolated 12 V at
1 kHz with 400 mA max drive capability PWM out-
put signal that conforms to IEC60929 and JIS
C8120-2.
• Accepts a phase-control constant-gate drive fluores-
cent input signal (100-120 V 50/60 Hz)
Physical Design
• Wall-mounted, NEMA-Type 1 enclosure, IP-20
protection; #16 U.S. Gauge Steel. Indoors only.
• Weight: 4.25 lbs (2 kg)
Mounting
• Surface mount between 16 in. (40 cm) studs
Environment
• 32-104 °F (0-40 °C). Relative humidity less than
90% non-condensing.
Specifications
SSwwiittcchheedd HHoott
CCuurrrreenntt
110000--227777 VV
SSoouurrccee//LLooaadd TTyyppee
Fluorescent
Incandescent
Low-Voltage
Metal Halide
Neon/Cold Cathode
16 A
16 A
16 A
16 A
16 A
Motors 1/4 HP @ 100-120 V
1/2 HP @ 200-277 V
2
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
pwm-3 05.30.06
Power Interfaces
GRX-PWM
Switching Systems
Dimensions and Mounting
• Mount only where ambient temperature is 32-104 °F ( 0-40 °C); less than 90% non-condensing relative
humidity.
• Allow 4.5 in. (114 mm) between interfaces when mounting several in a vertical layout.
• Mount so that line (mains) voltage wiring is at least 6 feet (1.8 m) from sound or electronic equipment and
wiring.
• Mount within 7° of true vertical.
• Internal relays click while in operation; mount where audible noise is acceptable.
All dimensions in inches (mm).
F
our
M
oun
ti
ng
H
o
l
es
Diameter - 0.25 in. (6mm)
F
our
S
crews
Secure Cover
6.10 in.
(
155 mm
)
3.30 in.
(84 mm)
12.50 in.
(318 mm)
11.75 in.
(298 mm)
4.0 in.
(102 mm)
COOPERSBURG, PA 18036 U.S.A .
G 8 BR
144-317 GRX-TVI 1-9
12 V PWM INTERFACE CONTROL
Control Input:
100-240 V 50/60Hz
Switched Output: 100-240
GRX-PWM
Incandescent 16A
Fluorescent 16A
Low-voltage 16A
Metal Halide 16A
Neon/Cold Cathode 16A
Motor 1 /4 HP@120V
1/2 HP@277V
®
Control
GRX-PWM Input Rating
I
H
2
0.02A
I
DH
2
0.1A
Load T ype Switched
Ratings
0-12V Output Rating
Max. 0.4A Class 2
4 mounting holes
Diameter: 0.25 in. (6 mm)
4 screws secure
cover
12.5 in.
(318 mm)
3.30 in.
(84
mm)
3.35 in.
(85 mm)
1.3 in.
(34 mm)
1.6 in.
(41 mm)
6.10 in.
(155 mm)
4.0 in.
(102 mm)
11.75 in.
(298 mm)
WWAALLLL
Coopersburg, PA 18036 U.S.A.
GRX-PWM
Incandescent
Fluorescent
Low Voltage
Metal Halide
Neon/Cold Cathode
Motor
16 A
16 A
16 A
16 A
16 A
1/4 HP @ 120 V
1/2 HP @ 277 V
Load Type Switched
GRX-PWM Output Rating
0.02 A
0.1 A
0-12 V Output Rating
Max. 0.4 A Class 2
I
H
2
I
DH
2
Control
079-1275
CB
P10
Type 1 Enclosure
Ind. Cont. Eq.
Listed 243C
50/60 Hz
0-12 V PWM INTERFACE CONTROL
Switched Output:
Control Input:
100-127 V
100-277 V
50/60 Hz
Control
GRX-PWM Input Rating
3
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
pwm-4 05.30.06
Power Interfaces
GRX-PWM
Switching Systems
• Each terminal can accept up to two #12 AWG (2.5 mm
2
)
conductors.
•H1 is the Hot feed to power the load.
•H
2 (on the control circuit terminals) supplies operating
power for the PWM interface.
• Wire control circuit terminals correctly:
— Leave second terminal empty.
— Do not connect 200-277 V to H2 terminal.
— Make sure H
2 is on the same phase as DH2
(Dimmed
Hot) from the lighting control.
• Run separate neutrals for load circuit - no common
neutrals.
• Panels can have different phases and/or voltages.
Wiring From Two Distribution Panels or Circuit Breakers
100-
127V
220-
240V
N2
DL2/DH2
L1/H1
N
1
N
1
SL1/SH1 + –
Max 0.3A
0-10V
Control Inputs Load Switched
L2/H2
100-
277V
EAR TH/GROUND
CONNECTIONS
L2/H2 100-120V
N2
DL2/D H2
L1/H 1
N1
N1
SL1/SH 1
0-10 Volt
NEUTRA L
L2/H 2 220-240V
N
LUTRO N
N
Earth/Ground
DDiissttrriibbuuttiioonn
PPaanneell
PWM Ballast
PWM Ballast
Dimmed Hot
Neutral
Neutral
Neutral
Hot
Switched Hot
Hot
Use 20 A
maximum circuit
breaker/MCB
To additional ballasts (50 max.)
PPWWMM CCoonnttrrooll SSiiggnnaall WWiirreess
- DO NOT
CONNECT TO LINE VOLTAGE.
Lutron is not liable for damage due to
miswiring.
Earth/Ground
Earth/Ground
Earth/Ground
connections
Earth/Ground
DDiissttrriibbuuttiioonn
PPaanneell
Neutral
Hot
GGRRXX--33000000
GGRRXX--PPWWMM
LLiinnee VVoollttaaggee::
110000--227777 VV
100/120
V
100-277 V
H2 is the Hot feed
that powers the internal
circuitry of the GRX-PWM. Use
H
2
oonnllyy
if your line voltage is
100/120 V .
H
2 N2 DH2
12 V
PWM
H1 N1 N1 SH1
-
+
SH1
N1
-
+
SH1
N1
WWiirriinngg DDiiaaggrraamm AA:: 110000--227777 VV GGRRXX--PPWWMM:: 22 DDiissttrriibbuuttiioonn PPaanneellss
4
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
pwm-5 05.30.06
Power Interfaces
GRX-PWM
Switching Systems
• Each terminal can accept up to two #12 AWG (2.5 mm
2
)
conductors.
•H1 is the Hot feed to power the load.
•H
2 (on the control circuit terminals) supplies operating
power for the PWM interface.
• Wire control circuit terminals correctly:
— Leave second terminal empty.
— Do not connect 200-277 V
• Run separate neutrals for load circuit - no common
neutrals.
• Use this wiring only if maximum circuit breaker/MCB rating
will not be exceeded.
Wiring From One Distribution Panels or Circuit Breaker
100-
127V
220-
240V
N2
DL2/DH2
L1/H1
N
1
N
1
SL1/SH1 + –
Max 0.3A
0-10V
Control Input s Load Switched
L2/H2
100-
277V
EAR TH/GROUND
CONNECTIONS
L2/H2 100-120V
N
2
DL2/D H 2
L1/H 1
N1
N1
SL1/SH 1
0-10 Volt
NEUTRAL
L2/H 2 220-240V
N
LUTRO N
WWiirriinngg DDiiaaggrraamm BB:: 110000//112200 VV GGRRXX--PPWWMM:: 11 DDiissttrriibbuuttiioonn PPaanneell
Earth/Ground
GGRRXX--33000000
DDiissttrriibbuuttiioonn
PPaanneell
PWM Ballast
PWM Ballast
Dimmed Hot
Neutral
Neutral
Neutral
Hot
Switched Hot
Hot
Use 20 A
maximum circuit
breaker/MCB
To additional ballasts (50 max.)
GGRRXX--PPWWMM
PPWWMM CCoonnttrrooll SSiiggnnaall WWiirreess::
DO NOT
CONNECT TO LINE VOLTAGE.
Lutron is not liable for damage due to
miswiring.
Earth/Ground
Earth/Ground
Earth/Ground
connections
LLiinnee VVoollttaaggee::
110000//112200 VV
H2 is the Hot feed
that powers the internal
circuitry of the GRX-PWM. Use
H
2
oonnllyy
if your line voltage is
100/120 V .
-
+
SH
1
N
1
-
+
SH
1
N1
H2 N2 DH2
12 V
PWM
H1 N1 N1 SH1
100/120
V
H
1 is the Switched Hot feed to the
load. Use a separate lead to H
1 if
your line voltage is 100-277 V .
5
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

GRX PWM GRX PWM GRX PWM.qxp (Lutron Electronics, Inc.)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 19 July 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document