March 2020
CITY OF FAYETTEVILLE, ARKANSAS
FINAL PLAT
Please fill out the Energov page completely, supplying all necessary information and documentation to support your request.
Your application will not be placed on the Planning Commission agenda until this information is furnished.
FPL Checklist:
Attach the following items to this application:
(1)
A final plat application will not be accepted until the final inspection has taken place, or at least been
scheduled, with the City Engineering Division.
(2)
Payment in full of applicable fees for processing the application:
FPL
Non-residential
$800.00
Residential (10 or less residential units)
$200.00
Residential (25 or less residential units)
$400.00
Residential (26 or more residential units)
$800.00
(3)
One (1) digital copy of correspondence in the form of a written letter to Planning Staff describing the scope,
nature and intent of the proposal.
(4)
One (1) digital copy in PDF format of the proposed FPL site, landscaping, utility, tree preservation plans,
signed application, and all other items submitted with this project. These plans should include all required
information for a FPL listed on the Plat Requirements checklist in Section 166.02 of the Fayetteville Unified
Development Code. These requirements are listed on the Plat Requirements checklist pages in this
application.
(5)
One (1) digital copy of the Completed Application signed by current property owner of record or written
verification signed by such owner designating a project representative.
FINAL PLAT - PLAT REQUIREMENTS CHECKLIST
(Fayetteville UDC Section 166.02)
1
Name, address, zoning and property lines of all property owners adjacent to the exterior boundaries of the
project.
2
Name, address, telephone numbers of owner(s), developer(s) and project representatives.
3
North arrow, scale (graphic and written), date of preparation, zoning classification, and proposed use.
4
Title block located in the lower right hand corner indicating the name and type of project, scale, firm or
individual preparing drawing, date and revisions.
5
Provide a complete and accurate legend.
6
A vicinity map of the project with a radius of 1.5 miles from the project. This map shall include any Master
Street Plan streets as well as the 100 year flood plain boundary.
7
Street right-of-way lines clearly labeled. The drawing shall depict any future R.O.W. needs as determined by
the AHTD and Master Street Plan. Future R.O.W. as well as existing R.O.W. and center lines should be
shown and dimensioned.
8
The location of all existing structures.
9
Written legal descriptions including area in square feet or acres that read clockwise (Note: If the project is
contained in more than one tract, the legal for each individual tract and a total tract description must be
provided.)
March 2020
10
Boundary survey of the property shown on the plat. The surveyor shall seal, sign and date the survey. The
survey shall be tied to state plane coordinates.
11
Provide a benchmark, clearly defined with an accuracy of 1/100’. This benchmark must be tied to USC & GS
Datum. Benchmarks include but are not limited to the following: fire hydrant, man hole, etc.
12
Point-of-beginning from a permanent well-defined reference point. This P.O.B. shall be clearly labeled on the
drawing.
13
Each plat shall have 2 points described in State Planes Coordinates, Arkansas, North, North American Datum,
1983 (NAD 83).
14
Curve data for any street which forms a project boundary.
15
Show 100-yr floodplain and/or floodway and based flood elevations. Reference the FIRM panel number and
effective date.
16
Note regarding wetlands, if applicable. Note if Army Corps of Engineers determination is in progress.
17
Delineate trees to be retained on-site and the measures to be implemented for their protection.
18
Clearly depict the limits of soil disturbance to include all areas to be graded both on and off-site.
19
Show proposed location of all utilities.
20
Landscape proposals for parking lots, street tree planting, and/or tree replacement requirements shall include
proposed plant species and size. Existing and proposed utility lines shall be shown on the plan. State the
method for irrigating the plant material on the plan. When an ordinance requires shrubs or other screening
material, show the layout of planting beds.
21
Show on the drawing all known on-site and off-site existing utilities and easements (dimensioned) and
provide the structure’s locations, types, and condition and note them as “existing” on the plat.
22
Existing easements shall show the name of the easement holder, purpose of the easement, and the book and
page number for the easement. If an easement is blanket or indeterminate in nature, a note to this effect shall
be placed on the plat or plan.
23
Water systems, on or near the site:
a. Provide pipe locations, types, and sizes; and service location.
b. Note the static pressure and flow of the nearest hydrant if requested.
c. Show location of proposed fire hydrants and meters.
24
Underground or surface utility transmission lines: (Note: This category includes, but is not limited to
Telephone, Electrical, Natural Gas, and TV Cable):
a. Locations of all related structures (pedestals, poles, etc.)
b. Locations of all lines (note whether the line is below or above ground).
c. A note shall be placed where streets will be placed under the existing overhead facilities and the
approximate change in grade for the proposed street.
25
State the width, location, and purpose of all proposed easements or rights of way for utilities, drainage,
sewers, flood control, ingress/egress or other public purposes within and adjacent to the project.
26
The location, widths, grades, and names of all existing and proposed streets (avoid using first names of people
for new streets), alleys, paths, and other rights-of- way, whether public or private, within and adjacent to the
project; private easements within and adjacent to the project; and the radius of each centerline curve. Private
streets shall be clearly indicated and named. Names of streets and addresses should be approved by the 911
Coordinator.
27
A layout of adjoining property (within 300') in sufficient detail to show the effect of proposed and existing
streets (including those on the master street plan), adjoining lots, and off-site easements. This information can
be obtained form the Master Street Plan, Aerial Photos, and the City Plat Pages located in the Planning Office
if requested.
28
The location of all existing and proposed street lights (at every intersection, cul-de-sac & every 300' and
associated easements to serve each light).
29
The lot layout, the dimensions of each lot, number of each lot, total area in square footage or acreage to the
nearest one-hundredth (1/100th) acre of each lot, and the approximate finish grade where pads are proposed
for building sites. Lots shall be numbered consecutively for all phases. The total number of lots shall be
indicated on the plat.
30
For phased development, a plat showing all phases is required.
March 2020
31
The location of known existing or abandoned water wells, sumps, cesspools, springs, water impoundments,
and underground structures within the project.
32
The location of known existing or proposed ground leases or access agreements, if known. (e.g. shared
parking lots, drives, areas of land that will be leased)
33
The boundaries, acreage, and the use of existing and proposed public areas in and adjacent to the project. If
land is to be offered for dedication for park and recreation purposes it shall be designated.
34
Location of buffer strips, fences or screen walls, where required (check Unified Development Code for
specific requirements).
35
Indicate location and type of garbage service. Dimension turnaround area at dumpster location.
36
A description of commonly held areas, if applicable.
37
Draft of covenants, conditions, and restrictions, if any.
38
A written description of requested waivers or variances.
39
Show required building setbacks. Provide a note on the plat of the current setback requirements for the
subdivision. A variance is necessary from the Board of Adjustment for proposed setbacks less than those set
forth in the zoning district.
40
Any other data or reports as deemed necessary for project review by the Zoning and Development
Administrator, City Engineer or Planning Commission.
41
Signature block to certify approval of streets, drainage and utility easements.
42
Signature block to certify approval of water and sewer system.
43
Signature block to certify approval of building setback dimensions.
44
Signature block to certify approval for recording.
45
Signature block to certify approval of Tree Preservation and Protection.
46
Signature block to certify approval of park land dedication or money in lieu.
47
Signature block to certify approval of utility easements.
48
Signature block to certify approval of ownership, title and dedication.
49
Signature block to certify approval of survey and accuracy.
The Zoning & Development Administrator and City Engineer may waive any of these application
requirements when, in their discretion, any such requirement is not necessary due to the nature of the
proposed project, or other circumstances justify such waiver. A pre-application conference may be arranged
and is encouraged to review the proposed project and discuss the checklist requirements.
(Note: As this request goes through the review process, revised copies of the project plans will be required
(see 'materials required for submittal' notice.)
Consent of Owner Form
PROPERTY OWNER(S) / AUTHORIZED AGENT: By signing below, I/we certify under penalty of perjury
that I am/we are the owner(s) of the property that is the subject of this application and that I/we have
authorized this application and consent to its filing.
PLEASE NOTE:
Property Owners: Attach additional info/documentation if necessary.
Authorized Agents: If signing on behalf of a Property Owner, a letter from each Property Owner must be
provided indicating that the agent is authorized to act on their behalf.
____________________________________________________________________________________
Associated Project (required field)
Property Owner 1:
x ________________________________________
Name of person signing [printed] Entity/Company signator legally owns or represents
__________________________________________ ________________________________________
Contact Email Contact Phone
____________________________________________________________________________________
Mailing Address
________________________________________________________________ ________________
Property Owner Signature Date
Property Owner 2: (if needed)
x ________________________________________
Name of person signing [printed] Entity/Company signator legally owns or represents
__________________________________________ ________________________________________
Contact Email Contact Phone
____________________________________________________________________________________
Mailing Address
________________________________________________________________ ________________
Property Owner Signature Date
Property Owner 3: (if needed)
x ________________________________________
Name of person signing [printed] Entity/Company signator legally owns or represents
__________________________________________ ________________________________________
Contact Email Contact Phone
____________________________________________________________________________________
Mailing Address
________________________________________________________________ ________________
Property Owner Signature Date
Property Owner 4: (if needed)
x ________________________________________
Name of person signing [printed] Entity/Company signator legally owns or represents
__________________________________________ ________________________________________
Contact Email Contact Phone
____________________________________________________________________________________
Mailing Address
________________________________________________________________ ________________
Property Owner Signature Date
click to sign
signature
click to edit
click to sign
signature
click to edit
click to sign
signature
click to edit
click to sign
signature
click to edit