Fill - Free fillable 369776 MRF2 Retrofit Packages Spec Submittal Part #369776a PDF form

369776a 1 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Energi TriPakR Basic Packages

The Energi TriPakR Basic Package incorporates

Maestro

R load controls and wireless sensors which

provides a system that delivers energy savings,

convenience, and ease of installation.

Maestro Wireless

R switches use LutronR patented

Clear Connect

R RF Technology, which enables

wireless communication with Radio Powr SavrT

sensors for light control.

Features

• The Energi TriPak

R Basic package provides switching

and occupancy/vacancy sensing of multiple load

types.

• Lutron

R patented Clear ConnectR RF Technology

works through walls and floors.

• Controls include Front Accessible Service Switch

(FASST) for safe lamp replacement.

• Two-wire installation for any retrofit application.

• Power failure memory: If power is interrupted, the

control will return to its previously set level prior to

interruption.

Receiving Devices

Maestro WirelessR Control

Transmitting Devices

Radio Powr SavrT Sensors

RF Switch

Ceiling-Mounted Occupancy

and Vacancy Sensor

Wall, Corner, or

Hall Mounted

Occupancy and

Vacancy Sensor

Model Numbers

MRF2-1S8A-1OC (1) 8 A Switch

(1) Radio Powr SavrT ceiling sensor

MRF2-1S8A-1OH (1) 8 A Switch

(1) Radio Powr SavrT hallway sensor

MRF2-1S8A-1OK (1) 8 A Switch

(1) Radio Powr SavrT corner sensor

MRF2-1S8A-1OW (1) 8 A Switch

(1) Radio Powr SavrT wall sensor

MRF2-1S8A-1VC (1) 8 A Switch

(1) Radio Powr SavrT ceiling

vacancy sensor

MRF2-2S8A-1OW (2) 8 A Switches

(1) Radio Powr SavrT wall sensor

369776a 2 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Maestro WirelessR Switch

Model Number

Switch

Lighting and motor loads

MRF2-8S-DV-XX 8 A Lighting, 3 A Fan (1/10 HP

motor, 120 V~ only), Spec

Grade Electronic Switch

120–277 V~, NO NEUTRAL

WIRE REQUIRED

Companion Controls

ClaroR Gloss Finishes

MA-AS-XX Companion Switch 120 V~

MA-AS-277-XX Companion Switch 277 V~

Satin ColorsR Satin Finishes

MSC-AS-XX Companion Switch 120 V~

MSC-AS-277-XX Companion Switch 277 V~

“XX” in the model number represents color/finish code.

Switch

Companion Switch

Switch Load Type and Capacity

No Neutral Required

Control Voltage Load Type Minimum

Load

Maximum Load

Not

Ganged

End of

Gang

Middle of

Gang

MRF2-8S-DV

1,2

120–277 V~

Incandescent/

Halogen

25 W 8 A 8 A / 7 A

7 A

120–277 V~

Fluorescent/

LED/CFL

40 W

(LUT-MLC)

8 A 8 A / 7 A

7 A

120 V~

Fan

Motor

0.4 A

1/10 HP

3 A

1/10 HP

3 A

1/10 HP

3 A

Switch Load Type: MRF2-8S-DV is designed for use with permanently installed lighting loads and with fan motor loads up to 1/10 HP (3 A, 120 V~ only).

Switch Load Type: MRF2-8S-DV are designed for use with permanently installed lighting loads.

Maximum load for double gang application is 8 A. Triple gang application derates maximum load to 7 A.

The LUT-MLC (included) ensures proper function with certain fluorescent, CFL, and LED load types.

MRF2-8S-DV-XX MA-AS-XX

369776a 3 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Specifications

Regulatory Approvals

• ULR Listed.

• CSA Certified.

• FCC Approved. Complies with the limits for a

Class B digital device, pursuant to Part 15 of the

FCC Rules.

• Industry Canada Certified.

Power

Operating voltage:

120 – 277 V~ 50/60 Hz

Key Design Features

Switch

• On a single-tap, lights turn ON or OFF.

All RF Local Controls

• Tested to withstand electrostatic discharge without

damage or memory loss, in accordance with IEC

61000-4-2.

• Tested to withstand surge voltages without damage

or loss of operation, in accordance with IEEE

C62.41-1991 Recommended Practice on Surge

Voltages in Low-Voltage AC Power Circuits.

• Controls always operate locally and do not require

system control.

• Power failure memory: should power be interrupted,

the control will return to its previously set level prior

to the interruption when power is restored.

• Uses conventional Single-pole, 3-way and 4-way

wiring.

• Multiple location control from Switch and up to 9

Companion Switches.

• Use LutronR Designer (ClaroR and Satin ColorsR)

wallplates or designer-style wallplates from other

manufacturers. Wallplates are sold separately.

• Lutron ClaroR

and Satin ColorsR wallplates snap on

with no visible means of attachment.

• Requires a 1-gang U.S. wallbox. 3

⁄2 in (89 mm) deep

recommended, 2

⁄4 in (57 mm) deep minimum.

• Green indicator light.

System Communications and Capacity

• Maestro WirelessR controls communicate with the

PicoR wireless controls and Radio Power SavrT

sensors through radio frequency (RF).

• Maestro WirelessR local controls must be located

within 60 ft (18 m) line of sight or 30 ft (9 m)

through walls, of Radio Power SavrT sensors.

• Maestro WirelessR local controls must be located

within 60 ft (18 m) line of sight or 30 ft (9 m)

through walls, of a Pico

R wireless control.

• Up to 10 sensors or PicoR wireless controls can

be assigned to each switch.

• Sensors can be assigned to multiple switches.

Environment

• Ambient operating temperature: 32 °F to 104 °F

(0 °C to 40 °C), 0%-90% humidity, non-

condensing. Indoor use only.

369776a 4 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Mounting

Wallbox

Control

Adapter

Mounting

Screws

Control

Mounting

Screws

Wallplate / Adapter purchased

separately.

Operation

IMPORTANT NOTICE:

FASST - Front Accessible Service Switch - to service load, remove power by pulling the FASST switch out

completely on either the Switch or Companion Switch. After servicing load, push the FASST switch back in fully to

restore power to the control.

Tapswitch

Tap on / off

FASST

Front

Accessible

Service

Switch

Status LED

Indicates load status; glows softly as

night light when light is off

Dimensions

Front View

Side View

5/16 in

(8 mm)

⁄8 in

(30 mm)

⁄16 in

(119 mm)

⁄16 in

(75 mm)

369776a 5 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Single Location Installation

MRF2-8S-DV

Brass

Black

Blue - unused, tighten

Optional

Green

Ground

Hot/Live

Neutral

Switch

Wiring Diagrams

Multi-Location Installation

MRF2-8S-DV

with MA-AS / MA-AS-277 or MSC-AS / MSC-AS-277

Brass

Black

Blue

Green

Ground

Brass

Black

Blue

Green

Ground

Brass

Black

Blue

Green

Ground

Hot/Live

Neutral

Companion Switch Companion Switch

Load

120 V—277 V~ 50/60 Hz

LUT-MLC*

When using controls in single location installations, tighten the blue terminal without any wires attached. DO NOT connect the blue terminal to any other wiring or

to ground.

Up to 9 MaestroR Companion Switches may be connected to the Maestro WirelessR Switch. Total blue terminal wire length may be up to 250 ft (76 m).

Requires MA-AS / MSC-AS for 120 V~ applications, and MA-AS-277 / MSC-AS-277 for 277 V~ applications.

Optional

A LUT-MLC ensures proper function when ﬂ uorescent, CFL, or LED

loads are used. Install the LUT-MLC inside a load fixture or in a

separate J-box of the circuit.

LUT-MLC*

369776a 6 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Colors and Finishes

Gloss Finishes Satin Finishes

Metal Finish

(wallplate only)

Stainless Steel

Taupe

Turquoise

Plum

Merlot

Terracotta

Sienna

Midnight

Hot

Desert Stone

Due to printing limitations, colors

and ﬁ nishes shown cannot be

guaranteed to perfectly match

actual product colors.

Eggshell

Biscuit

Snow

Palladium

Greenbriar

Bluestone

Mocha

Stone

Goldstone

Stone

Limestone

White

Ivory

Almond

Light

Almond

Gray

Brown

Black

When using Stainless Steel wallplates, it

is recommended to order the controls in

Black (BL) or Midnight (MN).

369776a 7 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Radio Powr SavrT Wireless

Occupancy / Vacancy Ceiling Sensor

LutronR Radio Powr SavrT occupancy/vacancy sensors

are wireless, battery-powered passive infrared (PIR)

sensors that automatically control lights via RF

communication to compatible dimming and switching

devices. These sensors detect the heat from people

moving within an area to determine when the space is

occupied. The sensors then wirelessly transmit the

appropriate commands to the associated dimming and

switching devices to turn the lights on or

off automatically. They combine both convenience and

exceptional energy savings potential along with ease

of installation.

Features

• Wireless occupancy sensor has 3 settings available:

Auto-On/Auto-Off, Auto-On Low-Light/Auto-Off, and

Manual-On/Auto-Off

• Auto-On Low-Light feature will only turn lights on

automatically if there is less than approximately 10 Lux

(1 fc) of ambient light

• Vacancy only model available to meet California (U.S.A.) Title

24 requirements

• Uses Clear Connect

R technology

• Passive infrared motion detection with exclusive LutronR

XCTTM Technology for ﬁ ne motion detection

• 360˚ coverage ranges from 324 ft

(30.2 m

) to 676 ft

(62.4 m

), depending on mounting height. See range

diagrams for more details.

• Simple and intuitive adjustments available for Timeout,

Auto-On, and Activity settings

• Supports advanced occupancy features, such as

dependent occupancy groups and customizable

occupied/unoccupied presets in some systems

• Multiple sensors can be added for extended coverage

—

refer to product speciﬁ cation submittal of receiving device

to determine system limits

• Lens illuminates during test mode to verify ideal locations

• Multiple ceiling-mount methods available for different

ceiling materials

• Front accessible test buttons make programming easy

• 10-year battery life design

• RoHS compliant

369776a 8 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Speciﬁ cations

Regulatory

• LutronR Quality Systems Registered to ISO 9001:2008

Standards Approved

• FCC certiﬁ ed

• IC certiﬁ ed

• Meets CA (U.S.A.) Energy Commission Title 24

requirements

• COFETEL

• ANATEL

• SUTEL

Power/Performance

• Operating voltage: 3 V -

• Operating current: 14 μA nominal

• Requires one CR 123 lithium battery

• 10-year battery life

• Non-volatile memory (saved changes are stored during

power loss)

Environment

• Temperature: 32 ˚F to 104 ˚F (0 ˚C to 40 ˚C)

• For indoor use only

Range

Local load controls must be located within 60 ft (18 m)

line of sight, or 30 ft (9 m), through walls, of a sensor.

Sensor Coverage Test

• Front accessible test button

• Lens illuminates orange in response to motion during test

mode and is visible from 60 ft (18 m)

Wireless Communication Test

• Front accessible test button

• Turn associated loads on and off

Timeout Options

• 1 minute *

• 5 minutes

• 15 minutes – default setting

• 30 minutes

Auto-On Options (Occupancy Versions Only)

• “Enabled” – Sensor turns lights ON and OFF

automatically – default setting.

• “Low Light” – Sensor turns lights ON automatically only

in low ambient light conditions. Sensor turns lights OFF

automatically.

• “Disabled” ** – Lights must be turned ON manually from

dimming or switching device. Sensor turns lights OFF

automatically.

Activity Options

• Low Activity ( ) – default setting

• Medium Activity ( )

• High Activity (

)

* Intended for use in high-activity, brieﬂ y occupied areas only

** There is a 15-second grace period that begins when the lights are

automatically turned off, during which the lights will automatically turn

back on in response to motion. This grace period is provided as a safety

and convenience feature in the event the lights turn off while the room is

still occupied, so that the user does not need to manually turn the lights

back on. After 15 seconds, the grace period expires and the lights must

be manually turned on.

369776a 9 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Installation Overview

Sensor Setup

• Sensor setup is available as a service by Lutron. For more information see the Sensor Layout and Tuning service document

(LutronR P/N 3601235).

Sensor Placement

• The ability of the sensor to detect motion requires line of sight of room occupants. The sensor must have an unobstructed

view of the room.

DO NOT mount behind or near tall cabinets, shelves, hanging ﬁ xtures, ceiling fans, etc. The sensor cannot

see through glass objects such as patio or shower doors.

• Hot objects and moving air currents can affect the performance of the sensor. To ensure proper operation, the sensor should

be mounted at least 4 ft (1.2 m) away from HVAC vents and light bulbs that are below the ceiling line.

• The performance of the sensor depends on a temperature differential between the ambient room temperature and that of

room occupants. Warmer rooms may reduce the ability of the sensor to detect occupants.

Mounting

Temporary mounting is optional to test sensor coverage and wireless communication before permanently installing the sensor.

Drop Ceiling (Compressed Fiber Ceiling Tile)

The mounting wire is provided for both temporary and permanent mounting of the sensor to ceiling tiles. It is designed to

allow temporary mounting, testing, and repositioning (if necessary) of the sensor without damaging a ceiling tile. Once the

ﬁ nal position of the sensor has been chosen, the mounting wire should be twisted together to permanently secure the

sensor in place.

Solid Ceiling (Drywall, Plaster, Concrete, or Wood)

• Temporary mounting: Ten (10) temporary mounting strips can be purchased in the kit L-CMDPIRKIT for temporarily mounting

and testing the sensor.

• Permanent mounting: Screws and anchors (for drywall or plaster) provided to mount the sensor.

Recess Mount

• Do not recess mount sensor in a metal surface.

• Recess mounting ring requires an opening of 3 in (76 mm) in diameter.

• Recess mounting ring secures internally to ceiling. Sensor twists into

the recess mounting ring and sits ﬂ ush with ceiling (see image to right).

• Recess mounting ring purchased as a separate kit: L-CRMK-WH.

369776a 10 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Dimensions

3.57 in

(90.7 mm)

2.85 in

(72.4 mm)

1.13 in

(28.7 mm)

0.40 in *

(10.2 mm)

0.60 in

(15.2 mm)

1.00 in

(25.4 mm)

* With the recess mounting kit 0.46 (11.7 mm) is below the plane of the ceiling.

369776a 11 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

* 12 ft (3.7 m) is the recommended maximum mounting height

Range Diagrams

8 ft

(2.4 m)

Ceiling

height

9 ft

(2.7 m)

9 ft

(2.7 m)

0 ft

(0 m)

12 ft

(3.7 m)

6 ft

(1.8 m)

3 ft

(0.9 m)

15 ft

(4.6 m)

15 ft

(4.6 m)

3 ft

(0.9 m)

6 ft

(1.8 m)

12 ft

(3.7 m)

Radius of Coverage at Floor

Sensor

Floor

Ceiling

Occupant

18 ft x 18 ft (5.5 m x 5.5 m) Maximum

room dimensions for complete coverage

when mounted on an 8 ft (2.4 m) ceiling

13 ft (4.0 m) Radius of coverage at ﬂ oor

when mounted on an 8 ft (2.4 m) ceiling

Sensor Coverage Chart (for sensor mounted in center of room)

Ceiling Height Maximum Room Dimensions for Complete Floor

Coverage*

8 ft (2.4 m) 18 ft x 18 ft (5.5 m × 5.5 m) 324 ft

(30.2 m

)

9 ft (2.7 m) 20 ft x 20 ft (6.1 m × 6.1 m) 400 ft

(37.2 m

)

10 ft (3.0 m) 22 ft x 22 ft (6.7 m × 6.7 m) 484 ft

(44.9 m

)

12 ft (3.7 m) 26 ft x 26 ft (7.9 m × 7.9 m) 676 ft

(62.4 m

)

369776a 12 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Lens Masking

Whenever possible, the sensor should be installed in a location where it cannot view areas outside the intended space,

such as hallways or adjacent rooms. If this situation cannot be avoided, portions of the lens may be masked to block the

view of the sensor into undesired areas. Ten (10) PIR Lens Masks can be purchased in the kit L-CMDPIRKIT.

Lens sections

shown in white are

masked with labels

Lens sections

shown in gray

have not been

masked

PIR Lens Mask

sold separately

(L-CMDPIRKIT)

Hallway falls

within Sensor’s

coverage area.

369776a 13 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Wireless Wall-Mount Sensor

LutronR wall-mounted occupancy and vacancy sensors are

wireless battery-powered passive infrared (PIR) sensors that

automatically control lights via RF communication to

compatible dimming or switching devices. These sensors

detect the heat from people moving within an area to

determine when the space is occupied. The sensors then

wirelessly transmit the appropriate commands to the

associated dimming or switching devices to turn the lights on

or off automatically. They combine both convenience and

exceptional energy savings along with ease of installation.

Features

• Wireless occupancy/vacancy sensor has 2 settings available:

Auto-On/Auto-Off, and Manual-On/Auto-Off

• Vacancy model meets California Title 24 requirements

• Passive infrared motion detection with exclusive LutronR XCTT

Technology for ﬁ ne motion detection

• 180˚ ﬁ eld of view model:

Minor motion = 1500 ft

(139.4 m

)

Major motion = 3000 ft

(278.7 m

)

• 90˚ ﬁ eld of view model:

Minor motion = 1225 ft

(113.8 m

)

Major motion = 2500 ft

(232.3 m

)

• Hallway model with long, narrow ﬁ eld of view:

Major motion = coverage of up to 150 ft (45.7 m)

• Simple and intuitive adjustments available for Timeout, Activity,

and Auto-On settings

• Accessible test buttons make setup easy

• Lens illuminates during test mode to verify ideal locations

• Multiple sensors can be added for extended coverage—refer to

product speciﬁ cation submittal of receiving device to determine

system limits

• 10-year battery life design

• RoHS compliant

Compatible RF Devices

• For use with LutronR products only

• Communicates to various wireless LutronR Clear ConnectR

systems*

* Contact Lutron Customer Service at www.lutron.com for

frequency/channel code compatibility with your particular

geographic region, and for integrating with other LutronR

lighting and shading products.

369776a 14 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Speciﬁ cations

Regulatory

• Lutron Quality Systems Registered to

ISO 9001:2008

Regulatory Approvals

• cULus Listed

• FCC certiﬁ ed

• IC certiﬁ ed

• COFETEL certiﬁ ed

• ANATEL certiﬁ ed

• SUTEL certiﬁ ed

• Meets CA (U.S.A.) Energy Commission Title 24

requirements

Power/Performance

• Operating voltage: 3 V

• Operating current: 14 μA nominal

• Requires one CR 123 lithium battery

• 10-year battery life design

• Non-volatile memory (saved changes are stored

during power loss)

Environment

• Temperature: 32 ˚F to 104 ˚F (0 ˚C to 40 ˚C)

• For indoor use only

RF Range

Distance between local load controls and sensor

should not exceed 60 ft (18 m) line of sight or 30 ft

(9 m) through walls.

Sensor Coverage Test

• Dedicated test button

• Lens illuminates orange in response to motion

during test mode

Wireless Communication Test

• Dedicated test button

• Turn associated loads on and off

Timeout Options

• 1 minute *

• 5 minutes

• 15 minutes – default setting

• 30 minutes

Auto-On Options (Occupancy Versions Only)

• “Enabled” – Sensor turns lights ON and OFF

automatically – default setting.

• “Disabled” ** – Lights must be turned ON manually

from dimming or switching device. Sensor turns

lights OFF automatically.

Sensitivity Options

• Low Activity (

) – default setting

• Medium Activity (

)

• High Activity (

)

* Intended for use in high-activity, brieﬂ y occupied areas only

** There is a 15-second grace period that begins when the lights are

automatically turned off, during which the lights will automatically turn

back on in response to motion. This grace period is provided as a safety

and convenience feature in the event the lights turn off while the room is

still occupied, so that the user does not need to manually turn the lights

back on. After 15 seconds, the grace period expires and the lights must

be manually turned on.

369776a 15 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Dimensions

4.35 in

(110 mm)

1.35 in

(34 mm)

1.8 in

(46 mm)

369776a 16 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Coverage Diagrams

180° Wall-Mount Sensors

(Models: LRFX-OWLB-P-WH and LRFX-VWLB-P-WH)

* Sensor mounting shown at 7 ft (2.1 m). Mounting height should be between 6 ft and 8 ft (1.6 m and 2.4 m).

Horizontal Beam Diagram

Vertical Beam Diagram *

0 ft

(0 m)

7 ft

(2.1 m)

0 ft

(0 m)

60 ft

(18.3 m)

20 ft

(6.1 m)

10 ft

(3.0 m)

30 ft

(9.1 m)

40 ft

(12.2 m)

50 ft

(15.2 m)

0 ft

(0 m)

20 ft

(6.1 m)

10 ft

(3.0 m)

25 ft

(7.6 m)

20 ft

(6.1 m)

10 ft

(3.0 m)

25 ft

(7.6 m)

0 ft

(0 m)

60 ft

(18.3 m)

20 ft

(6.1 m)

10 ft

(3.0 m)

30 ft

(9.1 m)

40 ft

(12.2 m)

50 ft

(15.2 m)

Compliant to NEMA WD7 test grid shown below

Tested Coverage Area

Major Motion 3000 ft

(278.7 m

) coverage

Minor Motion 1500 ft

(139.4 m

) coverage

25 ft

(7.6 m)

15 ft

(4.6 m)

50 ft

(15.2 m)

60 ft

(18.3 m)

369776a 17 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Coverage Diagrams

90° Corner-Mount Sensors

(Models: LRFX-OKLB-P-WH and LRFX-VKLB-P-WH)

* Sensor mounting shown at 7 ft (2.1 m). Mounting height should be between 6 ft and 8 ft (1.6 m and 2.4 m).

50 ft (15.2 m)

35 ft (10.7 m)

0 ft

(0 m)

7 ft

(2.1 m)

0 ft

(0 m)

20 ft

(6.1 m)

10 ft

(3.0 m)

30 ft

(9.1 m)

40 ft

(12.2 m)

56 ft

(17.1 m)

Horizontal Beam Diagram

Vertical Beam Diagram *

Compliant to NEMA WD7 test grid shown below

Tested Coverage Area

Major Motion 2500 ft

(232.3 m

) coverage

Minor Motion 1225 ft

(113.8 m

) coverage

50 ft

(15.2 m)

35 ft

(10.7 m)

35 ft

(10.7 m)

50 ft

(15.2 m)

369776a 18 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Coverage Diagrams

Hallway Sensors

(Models: LRFX-OHLB-P-WH and LRFX-VHLB-P-WH)

• Designed to mount at the end of a hallway with a clear view down the length of a hall.

• Detection at longer distances is best when motion occurs at right angles to the sensor.

• Multiple sensors can be used to extend coverage.

* Sensor mounting shown at 7 ft (2.1 m). Mounting height should be between 6 ft and 8 ft (1.8 m and 2.4 m) and centered within hallway.

Width of Hall Length of Hall

6 ft (1.8 m) or less 50 ft (15.2 m)

8 ft (2.4 m) 100 ft (30.5 m)

10 ft (3.0 m) or more 150 ft (45.7 m)

Maximum Recommended Hallway Length

5 ft

(1.5 m)

0 ft

(0 m)

5 ft

(1.5 m)

0 ft

(0 m)

25 ft

(7.6 m)

50 ft

(15.2 m)

75 ft

(22.9 m)

100 ft

(30.5 m)

150 ft

(45.7 m)

125 ft

(38.1 m)

0 ft

(0 m)

25 ft

(7.6 m)

50 ft

(15.2 m)

75 ft

(22.9 m)

100 ft

(30.5 m)

150 ft

(45.7 m)

125 ft

(38.1 m)

0 ft

(0 m)

7 ft

(2.1 m)

Top View

Side View

369776a 19 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Installation Overview

Sensor Placement

• The mounting height of the sensor should be between 6 ft and 8 ft (1.6 m and 2.4 m)

• For smaller rooms less than 12 ft x 12 ft (3.7 m x 3.7 m), detection may be improved by mounting the sensor at

6 ft (1.8 m) from the ﬂ oor.

• The ability to detect motion requires that the sensor have line-of-sight of all room occupants. The sensor must

have an unobstructed view of the room. DO NOT mount behind or near tall cabinets, shelves, hanging ﬁ xtures,

etc. The sensor cannot detect occupants through glass objects such as patio or shower doors.

• Hot objects and moving air currents can affect the performance of the sensor. To ensure proper operation, the

sensor should be mounted at least 4 ft (1.2 m) away from light bulbs and HVAC vents.

• The performance of the sensor depends on a temperature differential between the ambient room temperature

and that of room occupants. Warmer rooms may reduce the sensor’s ability to detect occupants.

• Distance between local load controls and sensor should not exceed 60 ft (18 m) line of sight or 30 ft (9 m)

through walls.

369776a 20 08.12.13

Energi TriPakR Energy Retrofit Packages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Mounting

• 180˚ and hallway sensors mount directly to wall with mounting bracket (included). See ﬁ gure below.

• 90˚ sensors mount directly in corner or on wall offset away from corner with mounting bracket (included).

See ﬁ gure below.

• Temporary mounting is recommended to test sensor coverage and wireless communication before permanently

installing the sensor.

• Temporary mounting: A 3MT CommandT adhesive strip is provided for temporarily mounting and testing

the sensor. This strip is designed for easy, damage-free removal and is not reusable.

• Permanent mounting: Mounting bracket, screws and anchors are provided to mount sensor.

• Flexible Armature Mounting Kit - P/N LRF2-MTG-KIT-CPN5991 (sold separately): A ﬂ exible sensor mounting

bracket which allows sensor to be mounted at right angles and at greater heights to increas coverage area.

3M and Command are trademarks of 3M Company.

180˚ Wall-Mount Sensor & Hallway Sensor

90˚ Corner-Mount Sensor

Download
Save PDF to desktop

Email
Email completed PDF

Send for Signing
Email for others to sign

Print
Print document

NAME

369776 MRF2 Retrofit Packages Spec Submittal Part 369776a

View Audit Log
Print With Audit Log
Duplicate Document

Fill Online, Printable, Fillable, Blank 369776 MRF2 Retrofit Packages Spec Submittal Part #369776a Form

Related forms

Fillable 369776 MRF2 Retrofit Packages Spec Submittal Part #369776a

Fill Online, Printable, Fillable, Blank 369776 MRF2 Retrofit Packages Spec Submittal Part #369776a Form

Related forms

First 20 documents completely FREE!