Fillable Horizontal Sheer Blind Selection Guide Form

Fill Online, Printable, Fillable, Blank Horizontal Sheer Blind Selection Guide Form Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Horizontal Sheer Blind Selection Guide Form

On average this form takes 7 minutes to complete

The Horizontal Sheer Blind Selection Guide Form form is 3 pages long and contains:

  • 0 signatures
  • 21 check-boxes
  • 18 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
Lutron®—Horizontal Sheer Blind Selection Guide
Residence: ______________________ Area: _______________________ Window(s): __________________
Step 1 Select Tube/Vane Size
Step 2 Select Mounting Option
2" Vane / 1
5
/8" tube
3" Vane / 2
1
/2" tube
Smallest width:
inches/mm
inches/mm
A
inches/mm
D
inches/mm
B
inches/mm
E
inches/mm
C
inches/mm
F
Width: Height:
Smallest height:
inches/mm
FED
A
B
C
•
To use inside mount, the window depth must be at least: 2 1/4” (57 mm) for both 2” and 3” vane
•
To be fully recessed, the window depth must be at least: 3 5/8” (92 mm) for 2” vane, 4 1/4” (108 mm)
for 3” vane
•
Do not make any deductions from the width. Lutron will deduct 1/16” (2 mm) per side on inside mounted
shades to allow room for proper operation.
•
Width limitations: 2” vane (24”-96”); 3” vane (24”-114”)
•
Lutron will make NO additions or deductions to the height measurement.
IMPORTANT
Horizontal sheer blinds are built to a single, specific height. The blind
is tilted to the View position when fully extended. Please verify exact
shade height that is required for your application to the nearest 1/16
inch. The height measurement includes the top assembly and bottom
bar, so the dimension provided should reflect the height needed from
the top of the assembly in its mounted position to the fully lowered
bottom bar location (at the window sill, floor, etc). When in the Closed
position, the blind maintains a gap of 3/8” between the bottom of the
blind and the window sill, floor, etc.
Step 2 Option A: Inside Mount Measurements
Optional Top Treatment
Fabric-wrapped fascia
pg. 1
Step 2 Option B: Outside Mount On Trim Measurements
Step 2 Option C: Outside Mount Above Trim Measurements
Width: The width of your shades is up to you. For example,
if you’d like to completely cover the window, measure
from edge to edge of the frame.
Height: Measure from the top of the
trim to the windowsill.
Order width:
inches/mm
Order height:
inches/mm
Width: The width of your shades is
up to you. For example, if
you’d like to completely cover
the window, measure from
edge to edge of the frame.
Order width:
inches/mm
Order height:
inches/mm
Height: Determine where you’re going to mount the shade.
Then, measure from where the top of the mounting
bracket will be located* down to the windowsill.
*
Note: The top of the installed mounting bracket must be at least 5 in
(127 mm) above the top edge of the window trim
Step 3 Select Fabric
Fabric and Color Name (Note: See Fashion Fabrics binder or www.lutron.com/fabrics)
_______________________________________________________________________________________
Fabric Model Number ____________________________________________________________________
Side
view
Side
view
pg. 2
Step 4 Select Top Back Cover Color
White (default)
Black
Clear Anodized
Taupe
Bronze
Light Ivory
Slate Grey
The selection here will determine the color of your top-back cover. Choose any color other than white will
result in an increased charge.
pg. 3
Please note: Product options may vary depending on application and intended use. For more
technical information, reference the Lutron shading solutions product guide (P/N 367-1455) located at
www.lutron.com or work with your Lutron qualified installer. Product availability is subject to change.
Please contact your local Lutron sales representative for more information on ordering product.
Please visit www.lutron.com/fabrics for more information or download the Lutron Design Collections
app at the Apple
® store.
www.lutron.com
World Headquarters 1.610.282.3800
I
24/7 Technical Support 1.800.523.9466
I
Customer Service 1.888.LUTRON1 (1.888.588.7661)
© 01/2017 Lutron Electronics Co., Inc.
I
P/N 368-3304 REV C
Step 5 Select Hardware Color (for fabric-wrapped fascia only)
Lutron-recommended color
(pre-selected to coordinate with fabric color)
Clear Anodized
White
Black
Custom Color ___________________________________
Bronze
Taupe
Light Ivory
Slate Grey
The selection here will determine the color of your fabric-wrapped fascia endcaps.
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Horizontal Sheer Blind Selection Guide Form

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 2 May 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document