Fillable 369655 LOS-CIR Series Occupancy Sensor Spec Submittal 369655c

Fill Online, Printable, Fillable, Blank 369655 LOS-CIR Series Occupancy Sensor Spec Submittal 369655c Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369655 LOS-CIR Series Occupancy Sensor Spec Submittal 369655c

On average this form takes 12 minutes to complete

The 369655 LOS-CIR Series Occupancy Sensor Spec Submittal 369655c form is 7 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 49 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Sensors LOS-CIR Series Occupancy Sensors
369655c 1 02.07.13
Infrared Ceiling Mount Sensor
The LOS-CIR Series passive infrared ceiling-mount
sensors can integrate into LutronR systems or function
as stand-alone controls using a LutronR power pack.
The sensor uses a small semiconductor heat detector
that resides behind a multi-zone optical lens. The
detector is sensitive to the heat emitted by the human
body. In order to trigger the sensor, the source of heat
must move from one range of detection to another.
Non-moving hot objects will not cause the lights to
turn on.
Features
• Intelligent, continually adapting Passive Infrared (PIR)
sensor
• Passive Infrared (PIR) sensing
• Reliable motion detection with high error immunity
• Snap-locks to ceiling-mounted cover plate
• Non-Volatile Memory: settings saved in protected
memory are not lost during power outages
• 450 ft( to 1500 ft( (42 m( to 140 m() coverage when
mounted on an 8 ft to 12 ft (2.4 m to 3.7 m) ceiling
• Affords choice of turning lights off or dimming to a
preset level in the unoccupied state when integrated
with a LutronR system.
Models Available
Model Color Coverage Field of View
LOS-CIR-450-WH White 450 ft( (42m() 360°
LOS-CIR-1500-WH White 1500 ft( (140m() 360°
Self-Adaptive Feature
The LOS-CIR Series sensors provide reliable detection
with high error immunity. The internal microprocessor
analyzes the information from the PIR technology and
determines the optimum setting to use in order to
properly cover the space.
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Sensors LOS-CIR Series Occupancy Sensors
369655c 2 02.07.13
Dimensions
Front View
4.5 in
(114 mm)
1.4 in
(38 mm)
Side View
Specifications
Regulatory Approvals
• ULR and cULR listed
Power
• Operating voltage: 20 – 24 V-, IEC PELV/NECR
Class2
• Operating current: 33 mA nominal
• Control output: 20 – 24 V- active high logic control
signal with short-circuit protection, open collector
when unoccupied
Environment
• Temperature: 32 °F to 104 °F (0 °C to 40 °C)
• Relative humidity: less than 95%, non-condensing
• For indoor use only
Timer Adjustment
• Automatic mode: Continually adapting sensor
automatically adjusts settings to the space
• Manual mode: 8 to 30 minutes
• Test mode: 8 seconds
LED Lamp
• Red: infrared motion detected
Housing
• Rugged, high-impact, injection-molded plastic
• Color-coded leads 6 in (15 cm)
Adaptive Functions
• Installation: 60 minutes
• Learning: 4 weeks for response to error conditions, air
current adaptation, and timer optimization
• Post-learning occupancy periods
—24 hour circadian occupancy periods learned
—Weekly occupancy periods learned
• Adjustments in post-learning period
— Generally occupied periods
(threshold = high-sensitivity mode)
— Generally unoccupied periods
(threshold = miser mode)
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Sensors LOS-CIR Series Occupancy Sensors
369655c 3 02.07.13
Power packs may be required when interfaced to LutronR lighting control systems. If more than 1 occupancy
sensor is connected to the same input, a power pack is required. A maximum of 3 occupancy sensors can be
connected to the same input. If more than 3 sensors are required per input, use one of the following models:
LOS-CDT-500R-WH, LOS-CDT-1000R-WH, or LOS-CDT-2000R-WH.
Power Supply Options
LutronR Lighting Control System Power Pack Required?
Digital microWATTT No
EcoSystemR No
Energi Savr NodeT No*
GRAFIK 5000T/6000R/7000T No, when used with seeTouchR wallstations with occupancy sensor
connections.
GRAFIK EyeR 3000/4000 Yes
GRAFIK EyeR QS No*
HomeWorksR Yes
HomeWorksR QS No*
LCP128T No, when used with seeTouchR wallstations with occupancy sensor
connections.
microWATTR No
QuantumR No*
RadioRAR Yes
RadioRAR 2 Yes
Softswitch128R No, when used with seeTouchR wallstations with occupancy sensor
connections.
Wiring: System Control
* Some system components do not supply external power for occupancy sensors. Refer to individual product
specifications for more information.
3
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Sensors LOS-CIR Series Occupancy Sensors
369655c 4 02.07.13
Neutral
Power
Pack
Lighting
Load
NOTE: Maximum 3 occupancy sensors.
Red (+20 – 24 V-)
Blue (signal)
Black
(common)
Black
White
Red
Red
1 to 3 Sensors with Power Pack
Switching Multiple Loads with Auxiliary Power Packs
Line
Neutral
Line
Lighting
Load
Lighting
Load
Power
Pack
Auxiliary
Power
Pack
Red
Red
Red (+20 – 24 V-)
Blue (signal)
Black
(common)
NOTE: Maximum of 3 devices total (occupancy sensors and auxiliary power packs) can be connected to a power pack.
Black
White
Red
Red
120 / 277 / 347 V~ 60 Hz;
230 V~ 50 / 60 Hz
120 / 277 / 347V~ 60 Hz
230 V~ 50 / 60 Hz
Wiring: Stand-Alone Control
4
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Sensors LOS-CIR Series Occupancy Sensors
369655c 5 02.07.13
Major motion detection
Minor motion detection
6.5 ft
(1.9 m)
12 ft
(3.7 m)
LOS-CIR-1500
LOS-CIR-450
Installation
Sensor Placement
Range Diagrams
• The occupancy sensor must have an unobstructed view of the room. Do not mount behind or near tall cabinets,
shelves, indirect hanging fixtures, etc.
• Do not place sensor within 4 ft (1.2 m) of air vents, air handlers, windows, fans, etc., as this may cause false
triggering.
• Closely follow the diagrams shown concerning major and minor motion coverage. The sensor can detect major
motion (e.g. person taking a half-step) at a greater distance than it can detect minor motion (e.g. writing at a
desk or reading a book).
• May not detect occupancy with no significant difference between ambient and body temperatures.
Sensor Setup
• Sensor setup is available as a service by Lutron. For more information see the Sensor Layout and Tuning
service document (LutronR P/N 3601235).
12 ft
(3.7 m)
22 ft
(6.7 m)
5
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Sensors LOS-CIR Series Occupancy Sensors
369655c 6 02.07.13
Using the Infrared Mask
Center Ceiling Mount
(Mask blocks sensor seeing
out doorway into hall)
Corner Ceiling Mount
(No mask needed)
Conference
Room Mask
180° Mask Full Mask
Rectangular
Areas
Over the Door Specific Areas
You Wish to
Mask
Typical Mask Patterns
Mounting
Normal Mounting
Twist and lock threaded mounting post onto cover
plate. Drill through ceiling tile with assembly, using
cutter end of the threaded mounting post. Secure
with washer and nut.
Cutter
end
Mounting to Non-Standard Ceiling or Fixture
Mount twist-lock cover plate using mounting screws,
nuts, and washers (included). Drill/punch wire routing
hole through ceiling tile at center of cover plate.
Mounting Plate Dimensions
4.2 in
(106.6 mm)
2.5 in
(63 mm)
0.52 in
(13.3 mm)
13/16 in (21 mm)
Wire Lengths
Number of Sensors 1 2 3 1 2 1
Number of Auxiliary
Power Packs
0 0 0 1 1 2
22 AWG 750 ft 375 ft 250 ft 375 ft 250 ft 250 ft
0.5 mm( 365 m 180 m 120 m 90 m 120 m 120 m
20 AWG 1200 ft 600 ft 400 ft 600 ft 400 ft 400 ft
0.75 mm( 730 m 365 m 240 m 365 m 240 m 365 m
18 AWG 2400 ft 1200 ft 800 ft 1200 ft 800 ft 800 ft
6
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Sensors LOS-CIR Series Occupancy Sensors
369655c 7 02.07.13
ON
ON
A
1
2
3
4
B
1
2
3
4
Black:
Timer
8 min
Red:
Infrared
sensitivity
75% default
Off (Default) On
Automatic (Normal) Manual on / off (Override)
Auto Threshold Adjustment High Sensitivity (Low turn-on threshold)
Lights indicate motion Disable LED Indicator
Retain Settings (Normal) Erase all learned settings; Restart Learning (Toggle On)
Sensor Adjustments
Timer Test Mode
Factory Settings
1. Remove the retainer cover.
2. Rotate the black timer adjustment knob to about
midway (12 o’clock).
3. Return setting to minimum setting (full CCW).
NOTE: The timer will remain in the 8 second test mode
for 1 hour, then automatically reset to 8minutes.
4. To manually take the timer out of the 8 second test
mode, turn the timer adjustment approximately 1/16in
(1.5 mm) clockwise to make the setting slightly above
minimum (just above the 8 minute setting).
Factory Settings 12 o’clock
Full CCW
Auto/Manual
Threshold
LED Motion Indicator
Reset Learned Settings
Strong Airflow Compensation
Over Doorway Installation
Timer Adjust
Auto Sensitivity
ONOFF
ONOFF
ONOFF
ONOFF
A
1
2
3
4
B
1
2
3
4
Override Settings
Off (Default) On
Disable Compensation (Normal) Enable Compensation
No (Normal) Yes (Use increased turn-on threshold)
Adjust Timer Automatically Use Manual Setting (No adjustment)
Adjust Sensitivity Automatically Adjust Sensitivity Manually
7
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369655 LOS-CIR Series Occupancy Sensor Spec Submittal 369655c

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 30 May 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document