Fillable 3691125 ENG Caseta Wireless Motion Sensor SPEC (3691125)

Fill Online, Printable, Fillable, Blank 3691125 ENG Caseta Wireless Motion Sensor SPEC (3691125) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

3691125 ENG Caseta Wireless Motion Sensor SPEC (3691125)

On average this form takes 11 minutes to complete

The 3691125 ENG Caseta Wireless Motion Sensor SPEC (3691125) form is 6 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 42 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Caséta Wireless Motion Sensor
3691125b 1 03.09.20
Caséta Wireless Motion Sensor
Lutron Caséta motion sensors are wireless, battery-
powered, passive infrared (PIR) sensors that automatically
control lights via RF communication to compatible dimming
or switching devices. These sensors detect the heat from
people moving within an area to determine when the space
is occupied. The sensors then wirelessly transmit the
appropriate commands to the associated dimming or
switching devices to turn the lights on or off automatically.
They combine both convenience and exceptional energy
savings along with ease of installation.
Features
• Wireless motion sensor has two settings available: Auto-
On/Auto-Off, and Manual-On/Auto-Off
• Vacancy model meets CA Title 24 requirements
• Passive infrared motion detection with exclusive Lutron XCT
Technology for fine motion detection
• 180° field of view:
– Minor motion = 15 x 2 x 35 = 1050 ft
2
(97.5 m
2
)
– Major motion = 20 x 2 x 45 = 1800 ft
2
(167.2 m
2
)
• Simple and intuitive adjustments available for Timeout,
Activity, and Auto-On settings
• Accessible test buttons make setup easy
• Lens illuminates during test mode to verify ideal locations
• Multiple sensors can be added for extended coverage; refer
to product specification submittal of receiving device to
determine system limits
• 10-year battery life design
• RoHS compliant
Compatible RF Devices
• For use with Lutron Caséta products only
Models Available
• PD-OSENS
• PD-VSENS
Sensor Type
O = Occupancy/Vacancy (Auto-On/Auto-Off)
V = Vacancy (Manual-On/Auto-Off)
1
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Caséta Wireless Motion Sensor
3691125b 2 03.09.20
RF Range
• Distance between local load controls and sensor should
not exceed 60 ft (18 m) line-of-sight or 30 ft (9 m)
through walls.
Sensor Coverage Test
• Dedicated test button
• Lens illuminates orange in response to motion during
test mode
Wireless Communication Test
• Dedicated test button
• Turn associated loads on and off
Timeout Options
• 1 minute
• 5 minutes
• 15 minutes (default setting)
• 30 minutes
Auto-On Options (Occupancy Versions Only)
• Enabled: Sensor turns lights ON and OFF automatically
(default setting)
• Disabled*: Lights must be turned ON manually from
dimming or switching device. Sensor turns lights OFF
automatically
• Pets: Pets transmit heat and may activate sensor. It is
recommended to disable Auto-On.
• Bedroom: If placing sensor in bedroom, it is
recommended to disable Auto-On.
• Off While Occupied: When the load control is manually
turned OFF, the sensor will not turn the lights back ON
automatically while the room is occupied. Once the room
is vacated, the sensor returns back to normal operation
after the timeout period has expired.
Example: Watching a movie.
Sensitivity Options
• Low Activity: (default setting)
• Medium Activity:
• High Activity:
* There is a 15-second grace period that begins when the lights are
automatically turned off, during which the lights will automatically turn
back on in response to motion. This grace period is provided as a safety
and convenience feature in the event the lights turn off while the room is
still occupied, so that the user does not need to manually turn the lights
back on. After 15 seconds, the grace period expires and the lights must
be manually turned on.
Specifications
Regulatory Approvals
• cULusR listed
• FCC
• IC
• IFT
• Meets CA (U.S.A.) Energy Commission
Title 24 requirements
Power/Performance
• Operating voltage: 3 V-
• Operating current: 14 μA nominal
• Requires one CR 123 lithium battery
• 10-year battery-life design
• Non-volatile memory (saved changes are stored during
power loss)
Environment
• Temperature: 32 °F to 104 °F (0 °C to 40 °C)
• For indoor use only
• Relative humidity: less than 90% non-condensing
Note: For unconditioned environments where the air
temperature may approach the temperature of the
occupants, additional sensors will be needed to achieve
the same coverage. This is true of any sensor that relies
exclusively on passive infrared technology.
Warranty
• 1-Year Limited Warranty. For additional Warranty
information, please visit www.casetawireless.com/warranty
2
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Caséta Wireless Motion Sensor
3691125b 3 03.09.20
Installation Overview
Sensor Setup
• For more information, please see the Caséta Motion
Sensor Quick-Start Guide (P/N 0301931) at
www.lutron.com.
Sensor Placement
• The mounting height of the sensor should be between
6 ft and 8 ft (1.6 m and 2.4 m).
• For smaller rooms, detection may be improved by placing
the sensor between 3 ft and 6 ft (0.91 m and 1.8 m) from
the floor.
• The ability to detect motion requires that the sensor have
line-of-sight of all room occupants. The sensor must have
an unobstructed view of the room. DO NOT place behind
or near tall cabinets, shelves, hanging fixtures, or anything
that may obstruct the sensor’s view. The sensor cannot
detect occupants through glass objects such as patio or
shower doors.
• Hot objects and moving air currents can affect the
performance of the sensor. To ensure proper operation,
the sensor should be mounted at least 4 ft (1.2 m) away
from light bulbs and HVAC vents.
• The performance of the sensor depends on a temperature
differential between the ambient room temperature and
that of room occupants. Warmer rooms may reduce the
sensor’s ability to detect occupants.
• Distance between local load controls and sensor should
not exceed 60 ft (18 m) line-of-sight or 30 ft (9 m)
through walls.
3
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Caséta Wireless Motion Sensor
3691125b 4 03.09.20
Figure A. Flat Wall-Mount
Mounting Bracket
Figure B. Corner-Mount
Mounting Bracket
Mounting
• The flat wall-mount, mounts directly to wall with mounting
bracket (included). See Figure A.
• The corner-mount can be used to mount in a corner or on
a wall offset from a corner (included). See FigureB.
– Temporary mounting is recommended to test sensor
coverage and wireless communication before
permanently installing the sensor.
∙
Temporary mounting: A 3MT CommandT adhesive
strip is provided for temporarily mounting and
testing the sensor. This strip is designed for easy,
damage-free removal and is not reusable.
∙
Permanent mounting: Mounting bracket, screws,
and anchors are provided to mount the sensor.
4
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Caséta Wireless Motion Sensor
3691125b 5 03.09.20
Dimensions
4.35 in
(110 m m)
1.8 in
(46 mm)
1.35 in
(34 mm)
5
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Caséta Wireless Motion Sensor
3691125b 6 03.09.20
Sensor Coverage
Tested Coverage Area
Major motion coverage: 20 X 2 X 45 = 1800 ft
2
(167. 2 m
2
)
Minor motion coverage: 15 X 2 X 35 = 1050 ft
2
(97.5 m
2
)
)Lutron, Lutron, Caséta and XCT are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries.
All other product names, logos, and brands are property of their respective owners.
35 ft
(10.7 m)
45 ft
(15.2 m)
20 ft
(6.1 m)
15 ft
(4.6 m)
0 10 ft
(3.0 m)
20 ft
(6.1 m)
30 ft
(9.1 m)
40 ft
(12.2 m)
50 ft
(15.2 m)
Vertical Beam Diagram*
7 ft
(2.1 m)
0
* Sensor mounting shown at 7 ft (2.1 m). Mounting height should be between 6 ft and 8 ft (1.6 m and 2.4 m).
6
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

3691125 ENG Caseta Wireless Motion Sensor SPEC (3691125)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 30 May 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document