Fillable 369886 ENG QS Link Power Supply SPEC (369886)

Fill Online, Printable, Fillable, Blank 369886 ENG QS Link Power Supply SPEC (369886) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369886 ENG QS Link Power Supply SPEC (369886)

On average this form takes 9 minutes to complete

The 369886 ENG QS Link Power Supply SPEC (369886) form is 5 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 35 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
QS System QS Supply
369886e 1 04.10.20
QSPS-DH-1-75
L(+) N(-)
100 - 277 V
Input / Entrada / Entrée
24 V
Output / Salida / Sortie
22.5 - 25 V
QSPS-DH-1-75
QS Link Power Supply
The QSPS-DH-1-75 QS link power supply provides up
to 75Power Draw Units (PDUs) on a QS link. The
QSPS-DH-1-75 powers additional compatible
accessories and devices, allowing them to be added
to a QSsystem.
Specifications
Model Number
• QSPS-DH-1-75
Input Power
• Nominal input voltage: 100–277 V~
• Frequency: 50/60 Hz
• Current consumption, fully loaded (typical):
0.5 A (277 V~)
0.7 A (230 V~)
1.0 A (120 V~)
1.3 A (100 V~)
Power Supply Output
• Nominal output voltage and tolerance:
24 V- / ±1%, 75 Power Draw Units (PDUs)*
• 2.5 A SELV / PELV / NEC® Class 2
• Power Draw Units (PDUs): Supplies 75 PDUs
maximum*
Note: This power supply is NOT rated for use with
motorized shades/window treatments.
Environment
• Ambient operating temperature : 32°F to 131°F
(0°C to 55°C).
• Ambient operating humidity: 0%to90% humidity,
non-condensing. Indoor use only.
• Unit generates heat, maximum 28 BTU / hr
• 60 °C maximum calibration point temperature.
For more information, see
www.lutron.com/TechnicalDocumentLibrary/048466.pdf
Mounting
• Mount using 1.38 in (35mm) DIN rail in accordance
with EN 60715
Dimensions
• 3.54in (90mm) × 3.54in (90mm) × 2.40in (61mm)
Regulatory Approvals
• UL
• cUL
• CE compliant
• NOM compliant
Efficiency
• Meets the U.S. Department of Energy level VI
efficiency standard
Warranty
• www.lutron.com/TechnicalDocumentLibrary/
3601201A_Commercial_Limited_Warranty.pdf
* Use above this maximum will reduce the lifetime of the supply and void all Lutron warranties. For more information about Power Draw Units (PDUs), please refer to
www.lutron.com/TechnicalDocumentLibrary/369405%20pdu%20spec%20submittal.pdf
1
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
QS System QSPS-DH-1-75 QS Supply
369886e 2 04.10.20
Dimensions
Dimensions shown as: in (mm)
Mounting
• Surface mount using screws, or mount on DIN rail
• Use an IP20 (minimum) rated consumer panel or breaker panel with integrated DIN
• The device must be mounted horizontally (connection terminal blocks on top).
DIN Rail Mounting:
Snap onto DIN rail.
To remove, pull out tabs with
screwdriver and lift off.
Surface Mounting:
Pull out tabs with screwdriver.
Screw through tabs to secure.
103298_en_02 PHOENIX CONTACT 8
L(+) N(–)
100 – 277 V
Input / Entrada / Entrée
24 V
Output / Salida / Sortie
22.5 – 25 V
103298_en_02 PHOENIX CONTACT 8
L(+) N(–)
100 – 277 V
Input / Entrada / Entrée
24 V
Output / Salida / Sortie
22.5 – 25 V
* Required clearance above and below the power supply.
Calibration
Point
3.54
(90)
5.90
(150)
1.18
(30)*
3.54
(90)
1.18
(30)*
2.40
(61)
1.73
(44)
1.97
(50)
2.17
(55)
2
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
QS System QSPS-DH-1-75 QS Supply
369886e 3 04.10.20
L(+) N(-)
100 - 277 V
Input / Entrada / Entrée
24 V
Output / Salida / Sortie
22.5 - 25 V
Wiring
• Wire in accordance with national and local electrical codes
• Each terminal accepts one 24 AWG to 12 AWG
(0.2 mm
2
to 2.5 mm
2
) wire, with 1/4 in (6.5 mm) stripped bare
• Maximum torque: 5.0 in-lb to 7.0 in-lb (0.6 N•m to 0.8 N•m)
Line / Hot (L) and Neutral (N)
from distribution panel
+ 24 V- to terminal 2 of devices on the QS link. Do not
connect to terminal 2 of other power sources on the
QS link
– Common to terminal 1 of all devices on the QS link,
including other power sources
L N
+
+
–
–
QS Link Wiring Length Wire Gauge Lutron Cable Part Number
Less than 500 ft (153 m) Power (terminals 1 and 2)
1 pair 18 AWG (1.0 mm
2
)
GRX-CBL-346S (non-plenum)
GRX-PCBL-346S (plenum)
Data (terminals 3 and 4)
1 twisted, shielded pair 22 AWG (0.5 mm
2
)
Up to 2000 ft (610 m) Power (terminals 1 and 2)
1 pair 12 AWG (4.0 mm
2
)
GRX-CBL-46L (non-plenum)
GRX-PCBL-46L (plenum)
Data (terminals 3 and 4)
1 twisted, shielded pair 22 AWG (0.5 mm
2
)
Output voltage adjustment knob
(factory preset to 24 V- further adjustment not required)
3
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
QS System QS Supply
369886e 4 04.10.20
QSPS-DH-1-75
QS Link Power Distribution
On the QS link, there are devices that supply power and devices that consume power. Each device has a specific
number of Power Draw Units (PDUs) it either supplies or consumes. A Power Group consists of one device that
supplies power and one or more devices that consume power; each Power Group may have only one
power-supplying device. Refer to the Power Draw Units (PDUs) on the QS Link Specification Submittal (Lutron P/N
369405) at www.lutron.com for more information regarding PDUs.
Within Power Groups on the QS link, connect all 4 terminals (1, 2, 3, and 4), shown by the letter A in the diagram.
Between devices on the QS link that supply power, connect only terminals 1, 3, and 4 (NOT terminal 2), shown by
the letter B on the diagram. See Wiring section on the previous page for details on wiring the QSPS-DH-1-75
power supply to the QS link.
L(+) N(–)
120 – 277 V
Input / Entrada / Entrée
24 V
Output / Salida / Sortie
22.5 – 25 V
LUTRON
GRAFIK Eye QS
Control Unit
Energi Savr Node
QS Unit
QSE-CI-NWK-E
QSE-IO
seeTouch QS
Keypad
seeTouch QS
Keypad
seeTouch QS
Keypad
seeTouch QS
Keypad
seeTouch QS
Keypad
seeTouch QS
Keypad
QS Sensor Module and
Occupancy Sensor
Power Group 1
Power Group 2
Power Group 3
Example: Power Group Wiring
QS Power Supply Power Group Wiring Detail
Between power supplying devices:
Connect only terminal 1 (common; “−” terminal
on the QSPS-DH-1-75). See previous page.
Between Power Group 3 devices and QSPS-DH-1-75:
Connect terminals 1 (common) and 2 (power).
Between Power Group 3 devices powered by the
QSPS-DH-1-75, and other power group devices:
Connect terminals 1, 3 and 4 (communication/data).
A
A
A
B
B
B
Terminals 1, 2, 3, and 4 connect devices
within a power group.
Terminals 1, 3, and 4 connect between
Power Groups. Terminal 2 is NOT
connected between Power Groups.
A
1
2
3
4
1
2
3
4
−
+
1 3 4
QSPS-DH-1-75
Power
Consuming
Device
QSPS-DH-1-75
4
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
QS System QSPS-DH-1-75 QS Supply
369886e 5 04.10.20
Power Supply Breaker Feed
QSPS-DH-1-75 power supplies have a large capacitive inrush when first powered. A dedicated breaker feed with
no more than the indicated number of power supplies is required to avoid nuisance tripping.
Voltage Breaker Size/Type Max QSPS-DH-1-75 Units
100 V~ to 127 V~
15 A QO series standard trip curve 13
20 A QO series standard trip curve 15
220 V~ to 277 V~
10 A (B trip curve) 2
10 A (C trip curve) 3
10 A (D trip curve) 6
16 A (B trip curve) 3
16 A (C trip curve) 5
16 A (D trip curve) 10
)Lutron, Lutron, GRAFIK Eye, Energi Savr Node and seeTouch are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries.
All other product names, logos, and brands are property of their respective owners.
5
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369886 ENG QS Link Power Supply SPEC (369886)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 30 May 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document