Fillable 369439 Pico Wired Spec 369439d Pico Wired Control

Fill Online, Printable, Fillable, Blank 369439 Pico Wired Spec 369439d Pico Wired Control Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

369439 Pico Wired Spec 369439d Pico Wired Control

On average this form takes 5 minutes to complete

The 369439 Pico Wired Spec 369439d Pico Wired Control form is 3 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 21 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Pico® PX Series Wired Control
369439d 1 08.21.12
PicoR Wired Control
The PicoR Wired control works with compatible
LutronR systems to control a light or group of lights.
The PicoR Wired control is easily wired to the system
via IEC PELV / NECR Class 2 wiring.
Features
•
Provides control for the following LutronR products
that incorporate a wired IR input:
- Energi Savr NodeT units
- QS Sensor Modules
- EcoSystemR ballasts or ballast modules
•
Mounts easily in any single-gang wallbox (sold separately)
•
Fits designer style ClaroR wallplates (sold separately)
•
Allows users to:
—
Turn On / Off individual fixture or group of fixtures
—
Raise / Lower light levels (-2BRL and -3BRL)
—
Recall favorite light levels (-3B and -3BRL)
•
IEC PELV / NECR Class 2 wiring
Model Numbers
PX-2B-GXX*-I01 2 Buttons
PX-2BRL-GXX*-I01 2 Buttons with Raise/Lower
PX-3B-GXX*-I01 3 Buttons (including Preset)
PX-3BRL-GXX*-I01 3 Buttons (including Preset)
with Raise/Lower
* “XX” in the model number represents color code.
PX-2BRL-GWH-I01
Shown actual size with ClaroR wallplate
(sold separately)
White
WH
Black
BL
Ivory
IV
White / Gray
WG
Light Almond
LA
Notes:
•
All models available in gloss finish only.
•
For White/Gray (WG), top and raise buttons are white; preset, lower, and bottom buttons are Gray.
Color and Finishes
PX-3BRL-GWH-I01 PX-3B-GWH-I01 PX-2B-GWH-I01
Models shown in White (WH)
1
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Pico® PX Series Wired Control
369439d 2 08.21.12
Specifications
Regulatory
•
Designed for IEC PELV/NECR Class 2 operation only
•
Complies with requirements of NFPA 70, of the
National Electrical CodeR IEC PELV/NECR Class 2
device wiring
•
Install according to all applicable national and local
wiring regulations
•
For regions requiring ULR listing on low-voltage devices,
install in a fully enclosed wallbox. Low- voltage wallboxes
are acceptible for regions that do not require ULR listing
on low-voltage devices
Power
•
Do not exceed 35 V-
•
Operating Voltage: 20 V- (IEC PELV/NECR Class 2)
•
Current Draw: 20 mA maximum
System Communication and Capacity
•
Total wire length from control to device must not
exceed 500 ft (152 m)
•
Not a wireless device
Mounting
•
Mounts easily in any single-gang wallbox (not included)
•
Lutron suggests using LutronR ClaroR wallplates to
ensure proper compatibility. Wallplates sold serparately.
PicoR Wired control may not be compatible with non-
LutronR wallplates, test fit non-LutronR parts before use.
Environment
•
Temperature: 32 ºF to 104 ºF (0 °C to 40 °C)
•
Relative Humidity: Less than 90% non-condensing
Wiring
•
PicoR Wired control does not receive IR input from
hand-held transmitters
•
PicoR Wired control does not connect to QS Link
•
A PicoR Wired control can only be wired to a single
control module or a single sensor interface
•
Each input on a control module or sensor interface can
be connected to only one control or one input device
Warranty
1-year limited warranty
For additional Warranty information, please visit
www.lutron.com/TechnicalDocumentLibrary/
369-119_Wallbox_Warranty.pdf
Red = 20 V-
Black = Common
White = IR Signal (IR input terminal of ballast or module)
2
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Pico® PX Series Wired Control
369439d 3 08.21.12
Operation
Raise Button (2BRL & 3BRL models only)
Lights increase in intensity.
Bottom Button
Lights dim to off.
Preset Button
(3B & 3BRL models only)
Tap once:
Lights go to preset levels.
Top Button
Lights brighten to full intensity.
Lower Button
(2BRL & 3BRL models only)
Lights decrease in intensity.
Dimensions
Measurements shown as:
in
(mm)
The basic functionality of the PicoR Wired control is detailed below. For specific system performance, reference
system documentation at www.lutron.com, or contact your LutronR representative.
4.69
(119)
0.31
(7.8)
1.98
(50)
ClaroR
wallplate
Wallplate
adapter
PicoR
Wired
control
Mounting
Wallplate and wallplate adapter sold separately.
2.94
(75)
3
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

369439 Pico Wired Spec 369439d Pico Wired Control

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 7 April 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document