®
S P E C I F I C AT I O N S U B M I T TA L Page
Job Name:
Job Number:
Model Numbers:
Energi Savr NodeTM Wireless Router Programming
369331a 1 10.12.10
Wireless Router by Others
A wireless router is required to use the Hand Held
Device (HHD) programming feature of Lutron®
Energi Savr Node units. An HHD is required to give
the installer/end user the option of using the intuitive
programming application (available from the Apple
iTunes Store online marketplace) for the Apple iPod
touch, iPad, or iPhone Hand Held Devices.
The iPod touch, iPad, or iPhone app allows the user
to program, set up, or commission an Energi Savr
Node system that contains multiple Energi Savr
Node units and/or multiple QS Sensor Modules
(QSMs) via the QS link. For specific features enabled
by the HHD, please consult Energi Savr Node
product specification submittals.
The wireless router allows the HHD to communicate
directly to the Energi Savr Node programming
interface via an Ethernet cable.
Apple, iPod touch, iPad, iPhone, and iTunes Store are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Cisco and Linksys are registered trademarks of Cisco Systems, Inc.
QS Link
Energi Savr
Node unit
QSM
Dedicated
Ethernet
Connection for
Energi Savr Node
QS units*
Apple
iPod touch
or iPhone
mobile digital
device
(HHD)
Wireless
Router
(by others)
Energi Savr Node
Programming
Interface
(not needed if
system includes
EcoSystem® or
DALI ESN)
* Note: Energi Savr Node QS units are not designed to exist on an open network.
Connection to an open network could result in reduced performance and
Ethernet connectivity issues.
1
Wire types for QS link: Lutron cable
GRX-CBL-346S: for distances less
than 500 ft (153 m)
GRX-CBL-46L: for distances between
500 ft (153 m) and 2000 ft (610 m)
2
Standard CAT5/CAT5E cable: Total
length not to exceed 300 ft (100 m)
1 1
2
2
Minimum Hardware Configuration Required
• Wireless router must support UDP multicast packets
• 802.11g standard protocol
• One free LAN connection for dedicated Energi Savr
Node programming port
• Routers with known compatibility issues (at time of
publication):
— Cisco®/Linksys® WRT-54N2
1