SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive PowPak Relay Module with Softswitch Wireless Lighting Control
3691046c 2 11.16.17
Specifications
Regulatory Approvals
• CE (European Union)
Power
• Operating voltage: 220–240 V~ 50/60 Hz
• Standby Power Consumption < 1.0 W
System Communication
• Operates using Clear Connect RF Technology for
reliable wireless communication; refer to model
number chart on page 1 for band frequency details
• Wireless sensors and controls must be located within
9 m of the associated control module.
Metal Ceiling Tile Mounting
• Metal ceiling tile grids must have a > 3 mm gap of
non-metallic material which extends the entire length
of the tile on at least one edge. This is often achieved
by foam spacers that are used to prevent tile-to-tile
rattling.
• Metal ceiling tile grids which are continuous (with no
gap) or those that are interlocked, must have a total
surface area that is less than 81 m
2
for each section.
The overall space can be larger as long as there are
non-metallic sections bordering or intersecting the
metal sections.
Environment
• Ambient operating temperature: 0 °C to 55 °C
• 0% to 90% humidity, non-condensing
• For indoor use only
• All drivers and ballasts used with Vive wireless controls
must comply with EN 55015 / CISPR 15
Output Ratings
• -16R models: 16 A; -5R models: 5 A;
RMKS-16R models: No minimum load requirements.
• Load types include (but are not limited to):
Incandescent, MLV, ELV, Resistive, Inductive,
Magnetic fluorescent, Electronic fluorescent
• Motor rating:
RMKS-16R- models: 6 A 220 –240 V~
Softswitch
• Patented Softswitch circuit eliminates relay arcing at
mechanical contacts
• Extends relay life to an average of 1 million cycles
• Output is non-latching
Key Design Features
• LED status indicator shows current load status and
provides programming feedback
• Power failure memory: If power is interrupted,
connected loads will return to the previous level prior
to interruption
