Fillable 3691051 Spec Skylark Contour Slid-to-Off C•L Dimmer SPEC (3691051)

Fill Online, Printable, Fillable, Blank 3691051 Spec Skylark Contour Slid-to-Off C•L Dimmer SPEC (3691051) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

3691051 Spec Skylark Contour Slid-to-Off C•L Dimmer SPEC (3691051)

On average this form takes 7 minutes to complete

The 3691051 Spec Skylark Contour Slid-to-Off C•L Dimmer SPEC (3691051) form is 4 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 28 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691051g 1 04.27.20
Wallbox ControlsLED
+
DimmerSkylark Contour
Skylark Contour LED
+
Dimmer
Dimmer for dimmable LED, CFL, halogen, and
incandescent bulbs.
Features
• Select light level with slider.
• Slide down to turn off lights.
• LED
+
includes the most advanced technology
for superior dimming of LED, CFL, halogen, and
incandescent bulbs.
• ULR Listed to control:
— Dimmable LEDs
— Dimmable compact fluorescent lamps (CFLs) with
integrated ballast
— Lutron LTEA Hi-lume 1% forward-phase
LED driver
— Halogen
— Incandescent
• Low-end light level adjustment to accommodate a
wide range of bulbs.
• 100% factory tested.
• Formerly C•L.
Application Requirements
• When dimming LEDs or CFLs, they must be
Lutron compatible for optimum performance.
• For a complete list of compatible DIMMABLE LEDs
please visit www.lutron.com/LEDfinder
• Some DIMMABLE CFLs and LEDs require a minimum
number of bulbs for proper operation. For details and
a list of bulbs, please visit www.lutron.com/LEDfinder
Model Number
CTCL-150-XX
1, 2
Single pole
CTCL-150H-XX-C
1, 3
Single pole
1
“XX” in the model number represents color / finish code.
See "Colors and Finishes" on next page.
2
For clamshell packaging, add an "H" after the "150".
Available in IV, LA, and WH.
3
Clamshell packaged product for Canada.
Available in IV, LA, and WH.
Select
light level
with slider.
Slide down
to turn off
lights.
* Wallplate sold separately
1
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691051g 2 04.27.20
Wallbox ControlsLED
+
DimmerSkylark Contour
Specifications
Regulatory Approvals
• ULR Listed to US and Canadian safety requirements
UL1472 / CSA C22.2 184.1
• SSL7A compliant
• NOM compliant
Power and Ratings
• 120 V~ 60 Hz
• 150 W dimmable LED / CFL
or
• 600 W incandescent / halogen
or
• Mixed bulb type per Multigang and Mixed Bulb
Type Ratings table (see page 3)
• Minimum load
- Incandescent / Halogen: 10 W
- LED: 1 SSL7A compliant lamp unless stated
otherwise in the Lutron compatible bulb list at
www.lutron.com/LEDfinder
or
• 250 W Lutron LTEA Hi-lume 1% forward-phase
LED driver (6 max.)
Environment
• For indoor use only.
• Operating temperatures 32°F to 104°F (0°Cto 40°C).
Performance
• Power-failure memory
• Captive linear slider
• Electrostatic discharge tested
• Precise color matching
• Mechanical air-gap switch to disconnect load power
Warranty
• 1 Year Limited Warranty
For additional Warranty information, please visit
www.lutron.com/TechnicalDocumentLibrary/
369-119_Wallbox_Warranty.pdf
Dimensions
4.69 in
(119 mm)
2.94 in
(75 mm)
2.75 in
(70 mm)
0.30 in
(7.6 mm)
1.39 in
(35 mm)
Note: Requires a U.S. wallbox 2` in (64 mm)
deep minimum.
Colors and Finishes
Gloss Finishes
Add color / finish code to model #
Example: CTCL-150H-WH
AL Almond
BL Black
BR Brown
GR Gray
IV Ivory
LA Light Almond
WH White
2
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691051g 3 04.27.20
Wallbox ControlsLED
+
DimmerSkylark Contour
Multigang and Mixed-Bulb-Type Ratings
When installing more than one dimmer in the same wallbox, it may be necessary to remove some side sections
prior to wiring (see diagram). Removal of dimmer side sections may reduce maximum wattage, as shown in
the chart below.
Mixing bulb types (using a combination of LED / CFL, and incandescent / halogen bulbs) will also affect the
maximum ratings, as shown in the chart below.
Each dimmer has inside
sections removed
Middle dimmer has two side
sections removed
Do not remove outside
sections
Total LED / CFL
Wattage Installed
(Wattage per bulb x # of bulbs)
Maximum Allowable Incandescent / Halogen Wattage
No sides removed 1 side removed 2 sides removed
0 W + 600 W 500 W 400 W
1 W – 25 W + 500 W 400 W 300 W
26 W – 50 W + 400 W 300 W 200 W
51 W – 75 W + 300 W 200 W 100 W
76 W – 100 W + 200 W 100 W 50 W
101 W – 125 W + 100 W 50 W 0 W
126 W – 150 W + 0 W 0 W 0 W
EXAMPLE: If one set of side sections is removed and there are three 10 W LED bulbs installed (Total LED
Wattage = 30 W), up to 300W of incandescent or halogen lighting may be added.
3
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691051g 4 04.27.20
Wallbox ControlsLED
+
DimmerSkylark Contour
Controls light level.
Up
Increases light level
Down
Decreases light level and turn
off lights
Slider
1
IMPORTANT: Set slider to
bottom before adjusting
dimming range.
Operation
(View with wallplate removed)
1
2
3
1
2
1
2
3
1
2
3
Up (clockwise)
Increases brightness
Down (counter-clockwise)
Decreases brightness
Sets low end dimming limit.
Low-end light level Adjustment lever
2
Lutron, The Lutron logo, Hi-lume, LED
+
, Skylark Contour, and C)L are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries.
All other product names, logos, and brands are property of their respective owners.
Wiring Diagram
Single-Pole Wiring
Line /
Hot Black Black
Dimmer
Green
Neutral
Lighting
Load
120 V~
60 Hz
4
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

3691051 Spec Skylark Contour Slid-to-Off CL Dimmer SPEC (3691051)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 17 May 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document