Fillable 3691037 Skylark Contour Reverse-Phase (Electronic Low-Voltage) Dimmer Spec 3691037

Fill Online, Printable, Fillable, Blank 3691037 Skylark Contour Reverse-Phase (Electronic Low-Voltage) Dimmer Spec 3691037 Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

3691037 Skylark Contour Reverse-Phase (Electronic Low-Voltage) Dimmer Spec 3691037

On average this form takes 7 minutes to complete

The 3691037 Skylark Contour Reverse-Phase (Electronic Low-Voltage) Dimmer Spec 3691037 form is 4 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 28 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691037b 1 04.26.17
Wallbox ControlsReverse-Phase DimmerSkylark Contour
Skylark Contour Reverse-Phase
(Electronic Low-Voltage) Dimmer
Dimmer for ELV, LED, CFL, Halogen, and
Incandescent dimmable bulbs.
Features
• On / off rocker switch with a linear-slide dimmer for a
standard designer wallplate opening
• UL
® Listed to control:
— Dimmable LED with integrated driver
— Dimmable compact fluorescent (CFL) with
integrated ballast
— Incandescent / Halogen
— Electronic Low-Voltage (ELV) transformers with
halogen or LED (see Lutron App Note #559)
• Reverse-phase type control. Neutral wire
connection is required in the wallbox.
• 100% factory tested.
Application Requirements
• For the best performance, use a bulb that is
on the Lutron LED Report Card Tool at
www.lutron.com/ledtool
For questions call 1.877.DIM.LED8.
• When dimming LEDs or CFLs , only bulbs marked
or rated as DIMMABLE WITH REVERSE-PHASE OR
UNIVERSAL DIMMERS may be used.
• Not compatible with magnetic low-voltage (MLV)
transformers or magnetic LED transformers / drivers
• Dimmer is not compatible with bulbs rated only for
forward-phase type dimmers.
Model Number
CTRP-253P-XX
1
Single pole / 3-way
2
1
“XX” in the model number represents color/finish code; see "Colors and
Finishes" on next page.
2
For 3-way and 4-way switching, use Claro switches or other mechanical switches.
Switch on
(to selected
light level),
and off
Select
light level
with slider
* Wallplate sold separately
1
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691037b 2 04.26.17
Wallbox ControlsReverse-Phase DimmerSkylark Contour
Specifications
Regulatory Approvals
• UL
® Listed to US and Canadian safety requirements
UL1472 / CSA C22.2 184.1
• NOM
Power and Ratings
• 120 V~ 60 Hz
• 250 W dimmable LED / CFL
or
• 500 W Incandescent/Halogen
or
• 500 W ELV with Halogen
or
• Mixed bulb type per Multigang and Mixed Bulb Type
Ratings table (see page 3)
Minimum Load
• 1 compatible LED / CFL bulb
or
• 5 W Incandescent/Halogen
or
• 1 ELV transformer (See note on page 3)
Environment
• For indoor use only.
• Operating temperatures 32°F to 104°F (0°Cto 40°C).
Performance
• Power-failure memory
• Captive linear slider
• Electrostatic discharge tested
• Precise color matching
• Mechanical air-gap switch to disconnect load power
Warranty
• 1 Year Limited Warranty
For additional Warranty information, please visit
http://www.lutron.com/TechnicalDocumentLibrary/
369-119_Wallbox_Warranty.pdf
Dimensions
4.69 in
(119 mm)
2.94 in
(75 mm)
2.75 in
(70 mm)
0.30 in
(7.6 mm)
1.31 in
(33 mm)
Note: Requires a U.S. wallbox 2` in (64 mm)
deep minimum.
Colors and Finishes
Gloss Finishes
Add color/finish code to model #
Example: CTRP-253P-WH
WH White
IV Ivory
AL Almond
LA Light Almond
GR Gray
BR Brown
BL Black
2
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691037b 3 04.26.17
Wallbox ControlsReverse-Phase DimmerSkylark Contour
Multigang and Mixed-Bulb-Type Ratings
When installing more than one dimmer in the same wallbox, it may be necessary to remove some side sections
prior to wiring (see diagram). Removal of dimmer side sections may reduce maximum wattage, as shown in
the chart below.
Mixing bulb types (using a combination of LED / CFL and Incandescent / Halogen bulbs) will also affect the
maximum ratings, as shown in the chart below.
Each dimmer has inside
sections removed
Middle dimmer has both side
sections removed
Do not remove outside
sections
Total LED / CFL
Wattage Installed
(Wattage per bulb x # of bulbs)
Maximum Allowable Incandescent/Halogen Wattage
No sides removed 1 side removed 2 sides removed
0 W + 500 400 300
1 W - 40 W + 400 300 200
41 W - 80 W + 300 200 100
81 W - 120 W + 200 100 50
121 W - 160 W + 100 50 25
161 W - 200 W + 50 0 0
201 W - 250 W + 0 0 0
*EXAMPLE: If one set of side sections is removed and you have two 20 W LED bulbs installed
(Total LED Wattage = 40 W), you may add up to 300W of incandescent or halogen
lighting.
Note: For recommended ELV transformers and compatible MR16 LED bulbs, please see Lutron Application Note #559
at www.lutron.com/TechnicalDocumentLibrary/048559.pdf. Always follow the transformer and bulb manufacturer
instructions for allowable loading.
3
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691037b 4 04.26.17
Wallbox ControlsReverse-Phase DimmerSkylark Contour
Wiring Diagrams
Single-Pole Wiring
3-Way Wiring
4-Way Wiring
Line /
Hot
Neutral
Red Yellow
Green
White
Dimmer
Lighting
Load
3-Way
Switch
120 V~
60 Hz
4-Way
Switch
Red/
White
Line /
Hot
Neutral
Red Yellow
Green White
Dimmer
Lighting
Load
3-Way
Switch
120 V~
60 Hz
Red/
White
Line /
Hot
Neutral
Yellow
Red
Green
White
Lighting
Load
Dimmer
120 V~
60 Hz
Red/
White
Dimmer Load-Side
Dimmer Load-Side
Note: Dimmer must be installed
on load-side per diagram.
Note: Dimmer must be installed
on load-side per diagram.
Lutron, )Lutron, Claro, and Skylark Contour are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries.
UL is a trademark of UL LLC.
Note: DO NOT swap the red and yellow wires or the LED dimming performance may
be adversely affected.
4
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

3691037 Skylark Contour Reverse-Phase (Electronic Low-Voltage) Dimmer Spec 3691037

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 17 May 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document