Fill - Free fillable 3691045 ENG Vive PowPak Dimming Module with 0?

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive

PowPak Dimming Module Wireless Lighting Control

3691045c 1 11.16.17

Vive PowPak Dimming Module with

0 –10V- Control

The PowPak Dimming Module with 0 –10V- Control

is a radio frequency (RF) control that operates

0 –10V- controlled LED drivers or fluorescent

ballasts based on input from Pico remote controls

and RadioPowr Savr sensors. The Dimming Module

with 0 –10V- Control is ideal for small areas

(e.g., classrooms, conference rooms, private offices).

Communication with RF input devices (e.g., Pico

remote controls, Radio Powr Savr sensors) is

accomplished by using Lutron Clear Connect RF

Technology.

These products are also compatible with the Vive

hub which enables a simple setup process using a

standard web browser on any Wi-Fi enabled phone,

tablet or computer. It also enables control and

monitoring of all Vive devices. The Vive hub can be

added at any time. System reprogramming will be

required. For a complete list of features supported

with the Vive hub, see specification submittal

3691044.

Note for Replacement: RMKS - the “S” model can

replace the non-”S” model.

Features

• Controls up to 60 mA of 0 –10V- controlled fixtures

together

• Switches up to 8 A total

• 0 –10V- control link automatically sources or sinks

to the third-party fixtures

• Configurable high- and low-end trim

• Various operating voltages available; refer to model

number chart on next page for details on voltage

requirements

• Receives wireless inputs from up to 10 Pico remote

controls, 10 Radio Powr Savr occupancy / vacancy

sensors, and 1 Radio Powr Savr daylight sensor

• Utilizes Lutron Clear Connect RF Technology; refer to

model number chart below for frequency band data

• Mounts to a 100 mm x 100 mm square junction box

through a 20 mm knockout

Models

Model Number Region Operating Voltage Frequency Band

RMKS-8T-DV-B Europe 220 –240 V~ 868.125 –868.850 MHz

NOTE: Contact Lutron for frequency band compatibility for your geographic region if it is not indicated above.

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive

PowPak Dimming Module Wireless Lighting Control

3691045c 2 11.16.17

Specifications

Regulatory Approvals

• CE (European Union)

Power

• Operating voltage

220 –240V~ 50 / 60Hz

Output Ratings

• Switch rating of 8 A. Rated for resistive or capacitive

loads as defined by IEC/EN 60669-2-1

• 0 –10V- control link for 60 mA maximum output,

source or sink automatically configures

Other Power Specifications

• Standby power:

220–240 V~ <1.0 W

• BTU / hour when fully loaded: 9

• Works with all drivers and ballasts that provide

a current source that is compliant to IEC 60629

AnnexE.2, and whose inrush current does not

exceed NEMA410 standards for electronic

driver / ballast

System Communication

• Operates using Clear Connect RF Technology for

reliable wireless communication; refer to model

number chart on page 1 for frequency band details

• Wireless sensors and controls must be located within

9 m of the associated control module.

Metal Ceiling Tile Mounting

• Metal ceiling tile grids must have a > 3 mm gap of

non-metallic material which extends the entire length

of the tile on at least one edge. This is often achieved

by foam spacers that are used to prevent tile-to-tile

rattling.

• Metal ceiling tile grids which are continuous (with no

gap) or those that are interlocked, must have a total

surface area that is less than 81 m

for each section.

The overall space can be larger as long as there are

non-metallic sections bordering or intersecting the

metal sections.

Environment

• Ambient operating temperature: 0°C to 40°C

• 0% to 90% humidity, non-condensing

• For indoor use only

• All drivers and ballasts used with Vive wireless

controls must comply with EN 55015 / CISPR 15

0 –10V- Control Link

• Communicates with up to 60 mA of fixtures

• Control link is IEC SELV

• 0 –10V- control can be installed using basic or

double-insulated devices

• Terminals accept one 0.75 mm

to 1.5mm

(18 AWG to 16AWG) solid wire

• Always follow local wiring codes

• Compatible with ANSI E1.3 2001 (R2006), IEC

60929 Annex E

Default Operation

• Associated wireless input devices control all

connected fixtures together

• Occupancy Sensors:

– Occupied:100%; Unoccupied:0% (OFF)

• Pico Remote Controls:

– On:100%; Favorite Level:50%; Off:0% (OFF)

• Daylight Sensor: Decreases electric light in response

to additional available daylight

Key Design Features

• LED status indicator shows load status and provides

programming feedback

• Configurable high-end and low-end trim

• Power failure memory: If power is interrupted,

connected loads will return to the previous level prior

to interruption

• 0 –10V- control mis-wire protection up to 30V-

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive

PowPak Dimming Module Wireless Lighting Control

3691045c 3 11.16.17

Advanced Configurations

Pico Remote Controls

• Up to 10 Pico remote controls

• Favorite levels can be set for each Pico remote control

Radio Powr Savr Daylight Sensor

• The Radio Powr Savr daylight sensor will affect all

connected LED drivers and ballast equally

• For multiple rows of daylighting, a separate PowPak

Dimming Module with 0 –10V- must be used for each

daylighting row

Minimum Light Level Setting (optional)

• Certain applications, such as hallways, may require

that the lights never turn off. For these areas, select the

minimum light level option and the load will lower to

programed low-end level. Default operation lowers to

OFF.

High- and Low-End Trim

• High-end and low-end trim affect all connected fixtures

equally, and can be configured from the PowPak

Dimming Module.

• Adjustable low-end trim (0% –45%). Trimmable low-end

can ensure a stable light level. Some fixtures will flicker

or drop out if trimmed too low.

• The maximum light output of connected fixtures can be

decreased down to 55% for energy savings in over-lit

spaces.

Note: The perceived light output of low-end trim may

vary between fixture manufacturers and model numbers.

For best results, do not mix different drivers or ballasts

on the same 0 –10V- circuit.

Radio Powr Savr Occupancy Sensors

• Radio Powr Savr occupancy and vacancy sensors

control all connected drivers or ballasts.

• Pico remote controls can be used to adjust the

occupied levels of fixtures that they control from 1% to

100% (of output signal) or can make them unaffected by

occupancy events.

• Vacancy events (area becomes unoccupied) turn all

driver or ballast models off or to minimum light level.

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive

PowPak Dimming Module Wireless Lighting Control

3691045c 4 11.16.17

System Diagram

Wiring Schematic

Radio Powr Savr Occupancy Sensor (up to 10)

Radio Powr Savr Daylight Sensor (up to 1)

Pico Remote Control (up to 10)

LED Drivers Fluorescent Ballasts

0–10V control

To fixtures (60 mA max)

* NOTE:

RMKS- model PowPak module can be installed in a

junction box or marshalling box. Please follow all

local and national electric codes for proper

installation methods.

Line / Hot

Junction Box*

Switched

Line / Hot

Neutral Neutral

−

0–10V to LED Drivers /

Fluorescent Ballasts

To LED Drivers / Fluorescent Ballasts

20 mm trade-size knockout opening

Adaptor

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive

PowPak Dimming Module Wireless Lighting Control

3691045c 5 11.16.17

Dimensions

Dimensions are shown as: mm

86.9

71.6

10 0.1

Range Diagram

9 m

maximum

Radio Powr Savr

Occupancy

Sensor

Pico

Remote

Control

PowPak

Dimming Module

Install in center of room

to maximize RF coverage.

PowPak

Dimming

Module

12 m

9 m

Lutron, )Lutron, PowPak, Clear Connect, and Pico are trademarks of Lutron

Electronics Co., Inc. registered in the U.S. and other countries

Radio Powr Savr and Vive are trademarks of Lutron Electronics Co., Inc.

NOTE: Wireless sensors and controls must be located within

9 m of the associated control module.

• Metal ceiling tile grids must have a > 3 mm gap of non-

metallic material which extends the entire length of the tile on

at least one edge. This is often achieved by foam spacers that

are used to prevent tile-to-tile rattling.

• Metal ceiling tile grids which are continuous (with no gap) or

those that are interlocked, must have a total surface area that

is less than 81 m

for each section. The overall space can be

larger as long as there are non-metallic sections bordering or

intersecting the metal sections.

31.8

20 mm trade-size knockout opening

112.0

Adaptor

Download
Save PDF to desktop

Email
Email completed PDF

Send for Signing
Email for others to sign

Print
Print document

NAME

3691045 ENG Vive PowPak Dimming Module with 010V Control SPEC (3691045)

View Audit Log
Print With Audit Log
Duplicate Document

Fill Online, Printable, Fillable, Blank 3691045 ENG Vive PowPak Dimming Module with 0?–10 V Control SPEC (3691045) Form

Related forms

Fillable 3691045 ENG Vive PowPak Dimming Module with 0?–10 V Control SPEC (3691045)

Fill Online, Printable, Fillable, Blank 3691045 ENG Vive PowPak Dimming Module with 0?–10 V Control SPEC (3691045) Form

Related forms

First 20 documents completely FREE!